Our Small Block 400 is Eating Starters...Two Mechanics Couldn't Fix It... Let's Try To Install One

My Brother Donnie
258 followers
1 Video View·Jan 13, 2025
all right folks we are back working on
this
86 gmc we're
going to do the starter today we've been
having nothing but starters
this thing has a 400 in it that's the
wrong one
like it's not supposed to be in it
so one of the things is
it's the 400 is out of like a 1970
chevelle
or something like that so one one of the
things is
it's eating starters alive literally
will break a starter
after 10 or 15 starts donnie thinks he
got it figured out
he just he just went like one of these
yep that's all that
so here's the deal everybody keeps going
and getting starters but they've been
getting
starters for an 86 and 83 whatever big
blocks
big blocks of 454 because you know
people think things like
oh 454. all right folks we had to go
supervise now what we were saying
this thing's got a 400 in it it's the
wrong engine this is the 86 the engine
is from 70.
so a 400 the the starter
mounts slightly different so everybody
that's been working on has been
ordering a starter for an 86 truck this
is an 86 but the motor is actually
a 70. so sometimes you have problems
with starters we
we did a whole other video showing you
that earlier there's a little bracket
that you need to use
and stuff but it keeps breaking the
snout and everything so
what we have here is a starter designed
for a 1970 it's actually got a cast iron
snout the snout is slightly different
yes who knows if that
will be all the difference i don't know
but that's what we got this is an ac
delco
um
that's our part number there danny
we got this one ac delco
remanufactured in china so for whatever
reason
it is cheaper for ac delco to take these
heavy ass starters
ship them all the way around the world
it's china rebuild them and then ship
them all the way back to the united
states
how long is that going to keep going on
all right and so what about this one
donnie
it's probably made in china two-way
remanufactured in china
remanufactured in china so that's
interesting isn't it so i got two
chinese starters here
but you can't get an american one so i
don't know what we're complaining about
um i'm thinking that one donny well
the reason i'm thinking this one look at
he's got now this is the one that was on
it which we think is probably for a 454
big block
see that there
we're a little dark well we got a
problem
well let me see if i can light it up
with my phone we got a problem here
with this breaking okay but is that what
keeps breaking
that's hollow and the bolt goes through
there
so it's got a quarter inch here a
quarter inch here and a quarter inch
here to hold it
and they have they haven't been getting
it lined up very good with the teeth and
everything so we're going to
get all that straightened down this
one's a little better but it's only like
a half inch up here
and then it goes hollow again and then
it gets quarter inch up here at the top
so i was looking at this one this one's
the same way
um it's quarter quarter quarter so
that's basically the same thing
it's basically the same this one here
is solid cast iron i believe this one is
a remanufactured
i think it's an original piece from 1970
i think
i don't know man it is cast though
instead of that other stuff well i guess
well
it's a lot well that's aluminum oh yeah
okay
this is a lot uh
it's a lot taller a tighter tolerance
there yeah
now we've got a special boat down there
with a big shoulder on a big long
shoulder
and that ain't doing nothing in these
starters because there ain't nothing for
it to grab a hold of
that's a good point um this one is the
from the choice of my three this one's
the best one
well that's the one we're gonna go with
um
you know that's the one we're going to
try and let's see what happens
we'll uh see what we can do okay
ronnie's got me under the truck
trying to kill me here but this is what
we got
here's where our starter mounts we got
our starter here
we've got our boats here we're going to
try to
lift it up there and get it in place
that bracket we've been talking about
here
right there it goes on this boat
right here somewhere right there
so i gotta get it lined up gotta get
these two bolts lined up
okay and uh
we'll get all these lined up and go at
it and see
what exactly what we're doing here's
these special shoulder bolts i told you
about
it's all one shoulder so
they're supposed to be good bolts
but they're from gm i think it's factory
they're actually factory jam boats
telling me here there's another one but
anyway
we're gonna try to slide this thing up
in here
and we'll get back with you when we uh
when we get it mounted there okay the uh
we had to switch starters here the other
starter would not
fit because the boats was too long
so i went ahead and put this starter in
there which i do not like
but we're still doing research we might
get another one to put in here
but we've got this one in we've got it
mounted
i did get that bracket on there i did
get it tight
that's more than what the other people
could say
so the bracket's tight the the bolts and
the starter
are tight the we've got to get back here
and try to check
the clearance on this thing which is
going to be
extremely fun but
we're going to do that here next and uh
i don't know if i'll get you a shot of
that or not
but i will try basically what we're
going to do
see if i can get around here to it
you know i'm getting old now ain't kind
of
a little heavy so
damn i don't know if you can see it but
there's some teeth up in there in the
starter
and i'm like all up in this damn thing
the teeth are up here on the starter and
we got to check the distance between the
teeth and this flywheel
and i need it to be a eighth of an inch
drill bit to go
in these teeth basically eighth inch
between the teeth
and the teeth of that starter over there
and it looks like it's gonna be too
tight
i'm just sitting here looking but i'm
gonna jump that bendix out and see
exactly what it looks like
when it comes out but like i say it
looks like it's going to be too tight
but we'll see and what i'm going to do
there's uh the way a starter works
on this on the starter here
let's see if i get this one over here
where i can show you
okay see how on the starter there's an
s there and there's an r there
the r is run the s is start
obviously your power wire goes here
power wire goes here your start wire
goes there it goes to your ignition
switch
and your run wire goes here this run
wire
goes back up to your distributor powers
your distributor
so basically your ignition switch comes
on
it starts it here your power goes in
here to the battery
starts here your ignition switch kicks
this on which throws the bendix out when
it throws the bendix out your power here
makes it spin so long as you don't hook
up power here
and just hit your starter wire your
bendix will jump out
which means that gear will jump out and
it's going to mesh up with the teeth up
there
so it will let me know how far off it is
i wouldn't try to hold that all day and
we're just going to jump it out and look
at it
and let it come back in real quick so
you know it's
not going to be any worse than starting
it for 10 seconds
15 seconds whatever it is that it takes
to start one so
we're going to jump it out and check it
and then
we'll see where we're at and we still
got to pull the wires down here
put a new starter cable and all that
good stuff on so we'll let you know
something
okay basically you see them teeth they
jumped out there
and they hit that flywheel and got hung
up
so i need to somehow measure that
and see exactly what it is up there
i don't know exactly how i'm going to do
that yet
but me and ronnie's going to brainstorm
and figure it out
um basically what i did
is just what i told you i hooked that
that
lead to the start side and i ran it over
here and hooked it to the battery
and took a battery cable and told ronnie
to hit the battery cable
so he's bumping it on the battery up
there up baby
and it's jumping out hitting the
flywheel
just like we wanted it to get it baby
hit it again ronnie
here we go it's going to jump don't jump
[Music]
there baby go well we need to figure out
exactly what that is and see if it's uh
see if it's jumping out far enough now i
know it's stuck in there
but it normally wouldn't be because the
motor would be turning and know
to kick it out so i'm gonna go get my
flashlight
i believe and uh see what i can come up
with here
and we'll let you know something here
shortly
all right people he's got me under here
now you believe this
so basically
it's a little too dark so you can't see
it but from this the
gear to the pinion shaft should be an
eighth of an inch
there's another way you can do it with a
paperclip in the gears but
you can't it's hard to get the paperclip
in there but uh
from the from this the top of the tooth
to the shaft
should be an eighth inch drill bit so
we're uh we're looking for an eighth
drill bit and if we find one we'll let
you know
all right folks so basically if we
if we slide an eighth inch drill bit
through from the top of the teeth to the
shaft
it should fit snugly this is two sizes
too big
and it's loose as hell
[Music]
it's a five thirty seconds so that would
be a uh
two and a half sixteenths
one and a quarter and eight yeah so it's
too big
so quarter eight
it's bigger okay and it doesn't it's
it's still loose so basically
the the uh starter needs to go
up but it can't go up because we didn't
put any shims on it
so this starter will not work if you put
it on it
it's so damn loose that it's just going
to grind everything it it's not shimmed
right it needs to be in tighter
so that's a that's probably why it's
been eating up starters and flywheels
because they can't get it shimmed right
so my guess is
this is just my guess that the cast iron
one would fit better but we don't have
bolts to hold it in
we don't have the right bolts what we
could do
is put these bolts in temporarily just
for fitment
tests with some kind of big washers on
them or something to hold it in place
and just see if it if we're right and
that one shims out better
and if it does then uh maybe we can uh
order the right bolts so there we go
finally focused up so uh i don't know
we could also try to shave some of the
top of the starter off
but use asking for it if we do that
because then yeah
do it every time yeah it's just it's
better to get the right damn starter and
the right bolts and all that so i think
we might have to order some bolts
okay y'all this ain't we're in tight
quarters down here but you take a
quarter
or 8 inch drill bit come on focus
focus up
take a little bit and you got to go in
between here
to here
so it sticks that means it's right
okay so you go to the shaft
not the bearing because the bearing
sticks out a little bit but you go to
the shaft
to the the actual teeth
of the starter and uh
that that will tell you something
that will get you close and you need an
eighth inch drill bits what they're
telling me
there's like 10 different people on the
internet saying this
so go there to there
and it hangs it hangs there
so it's extremely close
but we still need a few more shims
because our
it's it's wrong it's that's not an
eighth inch
but we need an eighth inch drill bit
but that one's a little longer i have an
eighth inch but we're moving in the
right direction this one
it wasn't nowhere close earlier when
ronnie was trying it
but we have found out that you put shims
under the outside
bolt and that basically rolls it in
towards the teeth
to make it tighter so we're going to put
a couple more in there
and we're going to keep trying it and
make sure we get to we get it tighter
there
okay look we shimmed the starter we had
to shim it on the left side
let's see if it starts any better go
ahead run hit it
[Music]
do it one more time no
don't do that anymore well
the starter missed the whole flywheel
i wonder what that means
we'll have to get back under there and
see
damn did fire up
well now i've got eight shims eight half
shims in it
and you guys ain't gonna be able to see
you i don't believe
see if i can get that back but my
bearing right there
is riding on the flywheel i got it too
close but
the whole the main problem is i think
the nose cone is wrong it should that
bearing should be past the flap
that's my opinion well i don't think
it's gonna focus on me ronnie
there maybe can they see it sometimes if
you touch the screen
where you're trying to focus
well i tried but right there you can see
where that bearing is touching
basically i've got eight shims over here
just on this side
i'm gonna pull a couple out and see if i
can
bring it back down to get that off of
there and see
uh see exactly what we can do hey if
anybody knows how to get the longer nose
cone and what it would be on let me know
yeah anybody knows how to get this long
starter with a longer nose cone
so that bearing is past the flywheel so
the bearing is not touching the flywheel
let me know but
this is what we're dealing with so this
is what we're going to do
we're going to back it out get it back
push it back this way a little bit
push it back this way a little bit
okay we've been playing with it here
just a little bit hit it see if it'll
start
[Music]
you ain't getting on for some reason all
right
take three
go ahead
trying to get gas in here
go ahead i don't think so
no you choke your chokes on anyway it
won't do that
okay what i've done here let's stop here
ron
what i've done is
i took i'll show you on this
starter here
[Music]
this starter let me show them with the
with the
with this one with this okay so the way
they're saying now to do it you know
in the past people said to use a paper
clip between the bendix
and the this is the bad starter in the
past they were saying to use a paper
clip between the bendix and the flywheel
but it's a pain in the ass to pull the
bendix out
so they figured out now that if you use
an eighth of an inch drill bit
which we don't have but we believe this
is about the same
you can lay it on the shaft and measure
between the shaft
and the the teeth on the
ring gear so
let me stand this up so you can see on
the top here
show how there's a clearance there
i don't know if they can see it okay so
basically when we were riding the damn
bearing
when we were riding the bearing we were
too close because this eighth of an inch
we're even closer than that right so the
teeth should not be touching that damn
bearing obviously but
it's just showing you that we were too
close so he pulled a few out
and apparently has gotten us to the
point where we're about shimmed right so
basically
by ship by taking the shims out he's
he's moving it back away
which means we're getting a little bit
more of a clearance here which is making
it mesh up a little better
now the problem with it not starting the
uh
the fuel is just now starting to pump up
here so i gotta get fuel in the
carburetor and then it should start
we've had that carburetor all flipped it
upside down and on its side and
everything else so
there's no fuel in it right now that's
the problem
but i will need to check this spot back
here in the back and make sure
i've got power to the distributor pull a
little gas down the carburetor try that
right
[Applause]
give it a little gas keep it on
[Music]
hang on i got to uh got to run the idol
up on this thing
[Music]
[Music]
[Music]
but we've got it up and running
everything
is good again but we still need
to do other things um if anybody knows
anything that can help us on the 400 let
us know down in the comments
we was out of fuel that's what our
problem was we had to go and get fuel
and put fuel in it and she fired right
up
all right sounds good see you at the wow
comment subscribe give us a thumbs up
for a film in it
