Getting the HUGE Gooseneck Trailer Back On The Road

My Brother Donnie
257 followers
Jan 13, 2025
okay we're gonna start playing with this
the gooseneck I got it drugged out with
a little truck here and yeah the tires
not touching the ground I realize that
but we're going to go start playing
around here we've got to get it wired up
for lights I want to do that next
because if I put the decking on there
then I'm rolling around on the ground
trying to get this wire around put the
lights first then I'm gonna knock this
next axle out from under I've got the
bearings and all to fix it I guess I'm
gonna fix it I can't find the back I
can't find an axle reasonable
everybody's wanting 600 bucks for that
axle and they just ain't kosher hell
fact of the matter is the tires they're
wanting $600 for set of rims but we'll
figure it all out we'll get it all
worked out here I'll have to get that
hub off like I got the last one off I
got a bunch screws to work off there we
got to get the bits out from under it
I've got my skid steer here I think
it'll pick it up
if not I'll take the tractor I hand the
skid steer you don't each side of it and
then get it up so I'll get it up one way
or another I like long drag it out if I
have to but um it's kind of huapi Joe
sitting in here right now because the
everything screwed up a little bit but
we'll get all that worked out here in
the future if you look at
the distance between that accent frame
rail and the distance between this axe
on the frame rail it's the same so this
back here is got it screwed up he's got
kind of twisted an angle it's probably
cuz I got that brake shoe over there and
none over here but I'm gonna run the
wires on the back of this thing and I'll
get back to you when I get these lights
in I'm gonna put LEDs I'm gonna put one
I'm gonna put one style LED over there
and then another style there and then
the same thing over here
so they will be different but there will
be LEDs but we got to scrape that scrape
that little bit of stuff out there where
it burnt like I told you before this
trailer bunker and so I'm gonna put just
basically two LEDs there two LEDs
they're totally wired to do these three
LEDs later it's all gonna be LED lights
on just because I like LEDs and this is
a side shot over here it's gonna be a
long week but it'll be good getting hey
I can get a lot of heavy with that one
and I think it'll be a good match for
that truck so here we go let's get
started I got them in now got them wired
up
I've got them wired up there now I've
got all the wires hooked there that goes
all the way the front watch go up here
and wire some more and we'll figure out
what's going on get up there figure out
what always got the wire rope this is my
staking table 20 foot clustered of two
things 25 foot long plus the gooseneck
the actual neck up to is 8 so 25 and 8
33 33 foot is about what she's gonna be
overall 34 35 is you go to the end of
the ramp because the ramps are past them
but you know 25 foot that means I'll get
four eight five five I'll get ten on the
bottom layer of hay bales so you get 10
on the bottom eight on top 10 and eight
18 you put one on the neck up there give
you 19 bales at a time is my is gonna be
max load and you might if it if it plays
out right I don't know how it's gonna
play out but you might get two you might
be able to get one on each corner of the
in the corner hold it up but I don't
know just depends on how it plays out I
might add another bar up there just to
do that trick you know if I want 20
bells at a time that's five that's five
runs a year it's basically what it is
and right now I'm running like 11 on the
trailer at a time
so I'm running nine loads a year yes
this truck burns more gas but if I can
cut my loads in half and then cut my
fuel mileage in half this will be about
the same amount of fuel being used
because I got to do twice the trips in
the other this one's getting about seven
and a half miles a gallon but I have not
changed the tires and we're talking
about putting a five-speed in it and
we're also talking about possibly
changing the rear-end gears gears in the
river in is 456 the pretty steep gears
and I think we put four Elevens in it
and do the same thing and grab some more
offence but you know every step I do on
this side getting it on the high side
I'm taking off from the low side and
that's what I like so much about it it's
low as hell so it pulls like hell so
I've got to be careful not to take too
much but right now it's got way too much
I don't need all the all this guy I
don't need that much powerful I mean if
you don't hear most people say that too
much fun what's that mean right but
we'll see
okay we're hearing the beauty of the
beast um I'm trying to figure out what
to do here that goes to there and goes
to here my plugins back here I don't
know if I want to go up to there then
come back to here or if I want to stop
here and just you know roll it up here
or what you know obviously if I go to
there
you can't pull on no more but if I go
here and this sumbitch swings all the
way over there I'm in trouble yeah like
if I go to here and then I jackknife at
90 degrees over there I'm gonna be in
trouble and looks like I lost of nuts
damn it
lost a nut there didn't even realize it
so what to do what to do what to do I
don't think I'm gonna pull it back
I go here add this to that have a ton of
cable and then it's gonna be dragging
the ground but I can't put a bungee
around here to hold it up here and the
bungee and let it come in and out or
possibly go around it I'll go up over
that and hopefully if I'm making a turn
it'll just pull it out all right we'll
get back when one gets more wired up we
have running lights two different styles
and we're gonna go up here I got the
right turns in one one chapters time
signal let's see which one it is here
the brown wire okay turn this up turn
this off turn that off and we'll go back
and work on the brown wire we'll had to
walk back there twice okay we'll walk
back down we'll see if the lights is
working here should be the right-hand
turn signal guess what it's the
right-hand turn - now we're going to go
back and find the left-hand turn every
one of these wires are wired differently
for every plug for some reason one truck
the wire will be green the next one that
will be purple on the next one that'll
be orange okay we've got the lights done
the wiring is done up there
the lights are done back here we've got
that done so far we need to get them
three ain't really worried about them we
don't have to have them and be nice to
have them but we don't have to have them
so we got the trusty Milwaukie hack so
up won't cut the wheel here that I've
got on that then I'm gonna get in there
and try to cut that well and then I'm
gonna try to cut that weld over there
and try to get this front piece of loose
and then I cut that brake shoe anywhere
in there and see if we can get it loose
where this will come out we're probably
not gonna get through with this tonight
but we'll get a good start on
and the dogs got to chase the ball so
let me get something to sit on
and I'm gonna get down from and start
cutting we're looking for more cells Oh
bleep that one we got just ain't cutting
it
I mean it's cutting it but we're gonna
kill a hundred battery's trying to use
that old blade I thought I had some more
blade somewhere so we're looking looking
looking
[Music]
that always feels good
backs crowd good before I just seen some
like didn't get to it and now the trope
still a let's transfer to another crew
get it down right here somewhere
thank you why are you
you watch it
[Music]
[Music]
[Music]
no new songs Oh bleats so this is what
I'm using and you can see half the teeth
ago come on focus
did you go you can see half the teeth
are gone and that's always done so far
but I'll get it
and I can't find no other ones so we got
and then though running up through the
boss the boss come out here told me what
she did with my saw blade no Nash's know
if I got that she says over here she
says over here and see him
she said she get him back here something
she said I tucked him in there real good
what should we back up here man
now I have to get her to get him but do
you let you there big boy well we're
slammed all the way back up so now it's
huh it kind of straightened itself a
little bit you know that it ain't
sitting cockeyed like it was not bad
anyone
that's probably gonna be real fun to cut
off because the the brake shoe is not
going to cook and I'm getting that I
think that's gonna be next
damn I wish I wasn't welded that's so
good
in two different spots but you know when
you're doing it you like damn I need to
weld it more and then weld it more she's
never done that but we'll see I don't
know what the asset is trailer waste but
that tractor I got down there surely it
won't pick up more than about five
hundred pounds but I might be able to
pick his corner you know and slide it
and her pick that client slide it this
way and try to ease it off for this
thing the Front's gonna slide that backs
where the problems gonna be Matt skid
steer pick up a thousand
I got more forms here for that skid
steer I don't think the a so the way
more than a thousand pounds they
probably probably won't weigh nowhere
close I'm glad we'll know the battery
I'm gonna climb in there so we don't
have to climb out and I'll let you see
that one get back to and the reason I
did that for so now my blade will fit in
there
so I can stick my blade like so on top
of that bar instead of cutting that bar
and it'll make it a lot faster work all
I gotta do is shave that welt off and
I'll come over and do the same thing
drop it in there so be able to do that
there and this front bar be loose then
all I've got to do is cut that break
loose and I thought that'd be real
simple but maybe down there at the
bottom it will be but I will let you
know who shortly
this is stopping point for day one I
haven't figured we'd get it over we're
done that's broke loose that's cut about
halfway hadn't started on that haven't
started on that but we got the lights
working I never got into the big battery
it's still just about all the chores but
we'll resume tomorrow I'm going to try
to find a grinder and grind that I think
a cutting blade on the grinder will take
it off a lot quicker than this saws oh
um obviously my cutting torch would be
the best but I don't want to hold a cut
torch all the way over here for 30
seconds worth cut and have to worry
about transporting it so we'll keep
working with what we got
