Let's rip the Aluminum Intake off this 400 SBC Engine 1986 Chevy GMC Sierra

My Brother Donnie
258 followers
1 Video View·Jan 13, 2025
all right folks we're going to mess with
this truck try to get it
doing its thing the whole problem
there's two problems one it doesn't
start worth a damn
and two it doesn't idle worth a damn so
it's like it
it seems like it's got power once it's
out on the road and the last guy that
was wrestling with it he was saying that
it drives pretty good when it's out on
the road
but uh it doesn't it will not idle right
and the starter uh is not
lining up right i think it might be the
wrong starter or the
it's just got issues so we're going to
shim it out properly
um but donnie is saying that he doesn't
like
the intake so let's check that out all
right so donnie thinks he knows what the
problem is
okay look number one look at them bolts
now there's no way in hell
that them bolts do not line up that's a
damn
that intake is for a uh
that intakes for a 94.95 it's for the
vortec motor it's not for the down
it's not for the old style chevrolet see
how bad the bolts are
see that the angle ain't right that's
the damn vortec
intake you know looking at just the
heads that don't look like
just the heads of the bolts it don't
look like it's on there right it's a
damn vortex
i'm telling you you can see the [ __ ]
water coming out of it in the back
it's a damn vortex unbelievable
it's got a damn look right there's a
water jacket
no damn chevrolet's ever had a water
jacket right there
that's a vortech intake and they got it
on to them
an old school 350. we should have just
done it ourselves man
we're going to save this people to say
this a ton of time all right hold on a
second we got to
do some other stuff okay so we looked in
the back
and we found the box for the intake
donnie was just bitching about
it is a
pro comp electronics pc2201 small block
chevy
whole shot series dual plane sat now it
looks like
these are designed so that they'll fit
on any engine
but if it's torqued a little bit or it's
not
um perfectly flat perfectly if it's
warped at all
it'll leak and if it leaks air
you get all kinds of issues which could
absolutely be the idol
donnie said he saw something else he
doesn't like there's a bunch of stuff on
here i don't like like
this wire here i mean there's no way
that's a good ground
even though it is for the electric choke
there's no way that's correct
this unhooked that's probably the choke
wire
or maybe the temperature sending unit or
something
yeah you know wire is hanging loose
right here this is another big issue you
can't have stuff like that
so the ground strap so so one of the one
of the things is that the starter
ain't starting melded to the
exhaust you know it's stuff like that
that's just
in this i mean how
how does that even how do you even begin
yeah i mean that kind of stuff that
whole damn
that whole thing is unhooked what does
it go to
and it's ruined now because it's
you know we've got to figure all this
stuff out
that ain't the way to do it i mean
we'll get it but it's like come on
people
if you don't know what you're doing
don't do it damn they screwed up my
vacuum line too see that little black
line coming out of the firewall there
beside it
up above you to the left right there
that know what that what you just had
your hand on that you got your pinky on
it
that's the vacuum line that makes all
the air conditioning work all the vents
and everything work
what you doing to me people that right
there's another big problem
the brake booster the main vacuum for
the brake booster out of the back of the
uh carburetor it's got a hose clamp on
one side but no hose clamp on the other
that's not that's not cool so we got we
got brake issues we got
starter issues and we got wiring issues
wiring issues and we've got
the engine doesn't idle right issues and
hold
pvc valve yeah another minute
and they're saying well it's getting
moisture in the motor well hell
with holes everywhere it will sell this
dirt all over the paint
all of that's because it's been sitting
with the top off of it
we're getting rained on so it probably
got all right that's how it's getting
moisture in here
oh there it is
the old brand new in it it's been
changed four times
and it ain't been ran 20 miles
well supposedly it's been changed four
times
so what we're going to do first donnie
what do you think mess with the starter
some of this is because there's a 400 in
it and the original
engine would have had more emissions
stuff on it
so some of that might just plug up to
emission stuff
your main power line going into your
alternate i mean into your
distribu look where they cut the wires
loose
see that yes
i'm sure they didn't think they had
power so that's the way they do it they
could've unhooked it and checked the
same thing
just little stuff and
everybody thought i was hacking my 454
up
i didn't do nothing to my 454. yep
um
should we try to fix that starter first
i think snatch the intake take the
intake off put another end we'll get try
to get another intake
and then maybe with the intake off we
can look and see if we can see anything
else that
if it confirmed that that might be uh
that might be the problem might be the
problem
all right well let's do it all right
we're gonna take the intake off
and uh see what it looks like
we're thinking that's the wrong intake
we're thinking we're going to go back
with an
old-school stocking stock intake
to hell with all this aftermarket crap i
want a cast iron intake
cast iron intake for a 1970.
we're not trying to hot rod this year
yeah i just wanted to work
i mean if i was hot rodding it yes i
would get a damn big
holley double pump or 750 with a
damn high-rise intake and double
snorkels and
put a blower on it but that ain't what
we're trying to do
this is a work truck i mean yeah i'm
just i just i'm just trying to get a
freaking
stock rebuild out of it basically and i
guess nobody does that so
nobody knows how to do it so we're going
to uh
take the intake off and see if we can
find a uh well i know we can
donny how common are cast iron intake
everybody puts these on and then they
take the cast iron one off and leave it
laying out in the yard yeah there might
be one out back somewhere
we'll go look around we'll find one
it won't be an issue
all right donnie's getting after it it's
been three minutes
how long has it been done
is this a new distributor i've paid for
kind of looks like it don't it
the everybody acts like this hard work
this ain't hard work you just pull the
[ __ ] apart i mean hell it'll be done in
five minutes
it's worth it tell him daddy don't worry
about it you know hey
the water ain't even finished draining
out he's already onto the next screw
it's about 30 minutes it went by we
think
boom there it is
what are we looking at in here danny
we're looking at
no gasket no gasket
it's got a gasket there
it looks to have a gasket too
it shouldn't be wet what about that
yellow crap in the back
jackets man it's water that's that water
it shouldn't no i mean there ain't built
up in that back left
port i guess it wouldn't matter though
see what that's old and greasy
see how that's the water in between
those on both sides
yes i let water fall in there when i
jerked it off
but not like that that thing was leaking
i'm pretty sure
you see it there it's a good hypothesis
it's stained all the way there that's
the bottom side
see how this one's not and this one is
well you saw how there was like yellow
crap
on the back
that was visible when the thing was
still on there
that one's sell that one's three times
wetter than that one
i think that one was leaking
donnie thanks we need a better intake
old-school one
and we need to get a new set of gaskets
and try it again what else you see
donnie
the head looks good i mean it's it's
definitely just been rebuilt
i mean these should have carbon build up
all in them and they don't
so it's running nice and clean one inch
runner so all that yellow crap in the
back
that's antifreeze that's antifreeze
deposit
okay that's deposit from the water jack
the
front two and the back two are water
jackets this one and this one and this
one and this one
and that's just that's just slime
that's it's water and oil is what it is
okay it's like see it right there it's
down in there too
it's probably where they pulled this
intake so
bam right there it is come around here
and look at that backside
whoop there it is people why y'all know
about that
we're gonna see what donny sees see all
that there
new light now we're seeing something i
can't see from this angle though but
the camera is
donnie said whoop there it is people
bet y'all didn't know donny was a
hip-hop fan
tell them about what a hip-hop fan you
are donnie tell them about what a hip
hop fan you are
[Music]
and yeah you used to like uh dj jazzy
jeff
you saw my blinker she saw my blinker
yep
and you like the uh sir mix a lot
hey that's pretty good i can't yeah
what's all that crap
that better yeah we can see it on
that's water and oil that front cover is
leaking like hail
across the front uh-huh
so water leaking into the oil yeah it's
up here too
it's on intake too so in your opinion so
that didn't just now happen
nope that didn't happen it wouldn't mix
you mix water and oil you get milk
that's what that is that's milky
substance
right there somewhere off the intake now
uh is that going to make it run like
crap because it's probably doing the
same thing with air is what you're
saying yeah
the air is coming in at the same place
well there you go
people all right so what are we gonna do
daddy we're gonna get another intake put
on
should we upload this video by itself
without the intake or should we wait to
finish the video
we're probably gonna upload this one
without the intake and then do another
one next week with the intake there's
gonna be little things we got to do too
like
this side over here if we do not put the
uh
there's a piece of metal that goes in
here on both sides
that covers them spark plugs and if you
don't have them things on there you just
gonna kill your spark plug boots if you
look at that other side they're on there
and then on the back they don't bend one
of them out of the way when i take a
plug out and straighten it up
see it over there we're gonna have to
have those they're
we're just gonna i mean you don't have
to have them
but it's stupid not to have them because
you're just gonna eat spark plug
wires up yeah so there's a lot of little
stuff that people overlook that
you kind of you kind of need
and we got to uh get some wiring for our
start
you may be able to see it down in there
the starter all the wiring screwed up
which is why it's eating starters that's
part of it
i can't even yeah look at that i mean
come on man
and they're electrical tape and wires
together
your starter is going to eat up if the
wiring is all screwed up ain't it
yep and you know the grinding now the
grinding
is either the starter has worn itself
out probably because the wiring screwed
up
or it's misadjusted and they do move
sometimes so you got to get them in
there just right and all that too so
we'll do a whole video on the starter
one of these here days but first we got
to do this top
so all right so that's what she looks
like inside and we believe
so you believe that's the problem why
it's not idling right that's the issue i
believe that's the issue with the idling
now the issue with starting is a totally
different thing that starter grinding is
totally different
but the idling process
we're on it right now boom there it is
all right people so leave your comments
below if we missed something
do you want them to tell you if you're
wrong hell yeah if they think they know
all right so if we missed something go
ahead and let us know people hey what's
that 371 back here don is that like a
build number or something
on the firewall there oh no telling me
that's probably from the factory i don't
know
tell us about that down below two people
so you know in my videos
i never want people to tell me how wrong
i am because usually i don't think they
know what they're talking about
but donnie he likes when people tell him
just
wrong i'm laughing because i know that
ain't true
but yeah if you got any comments or
something we should look at let us know
because we've had a couple guys look at
this and i ain't figured it out yet so
we're flying here uh
trying to do it ourselves so uh but i
think i think he's onto something for
show
so um looks like we got another oil
change coming too donny yep
oil change all right so uh we'll uh
we'll get that intake and we'll have
this video up
it'll probably be about a week after
whenever you see this video you'll see
the video of whatever happened with the
intake
right so we'll see you on the next video
hope you enjoyed it tell them what to do
donny
subscribe to the channel that's first
thing well no the first thing is
give us a thumbs up that's the best
thing you can do for the video yep give
us a thumbs up thumbs up it'll make it
you know put us up in the front of the
album
i'll go rhythm and it'll make it better
so give us a thumbs up subscribe to the
channel if you haven't already
and uh give us a comment down below and
we'll see you on the next one
