The Refrigerator Broke in Our Mobile Home!

My Brother Donnie
258 followers
1 Video View·Jan 13, 2025
OOP out right so we're messing the
kitchen sink it was leaking really bad
this original fault that this was
destroyed so Donnie's trying to get it
out you know you didn't take that
footage in I get this loose all right
it's loose it was all screwed up the
original is leaking of course it's got
holes rusted in it but the the locknuts
couldn't come off so we had to cut them
off with that chisel multi-purpose tool
Milwaukee multi-purpose tool multi-tool
works real good for cutting things times
of called tons of calls took all the old
caulk off got the new faucet in getting
it all cleaned up as good as possible
all right folks we got the sink back in
got the new faucet on it the old one
actually had a hole in the back of it so
that it rotted through crazy
holding water down or not dripping
everything's cool
golden hi then we got the new little
prayer on there
so that'll be nice the next thing we got
to do down the road we got to replace
the little piece of laminate on the
front that was all ripped up so we're
gonna pull it off and put something else
Thanks looking good
[Music]
so the refrigerator works it's ice-cold
you can see the height so look at the
ice on it that's not a good thing though
it's not supposed to be on there like
that work frigerators ice cold but the
fan never turns on so is it the fan
motor or wood so we're going to say we
can order another fan motor we kind of
need a we need a multimeter man because
it might not be supposed to be on write
down all right
right Danny what are you doing trying to
fix time to fix a frigerator we have our
new motor which we ordered online and
they sent us the wrong part of course
so the slight difference looks like the
wires are on the other side and the
brackets are different so Donny's
swapping the brackets over and the wires
it looks like it's probably long enough
to reach maybe possibly hopefully
hopefully and it has a different fan but
that ought to work - what you think I
mean it's just a fan you think that
that's in power - it shouldn't matter if
it's the exact same thing half way
[Music]
bigger but I think it'll go behind it if
it goes behind it so it took me an hour
and a half to find this part and the guy
I specifically chose this one because it
was the exact correct part by the
pictures and everything and the guy
sends me the wrong damn port
we get this family
here's the spin
would you be alright you want to try to
put doubles one on which may or may not
work it does seem like it spins the same
way the blades are shaped the same one
chef size is different
oh thank you eBay guy I appreciate you
screwing me over like that when I
ordered SM three four five and the guy
sends me SN 343 you know the cheaper one
thanks buddy fruits alright we're gonna
figure it out we ought to be able to
make it work small Donny has busted out
the drill bits there's parts flying
everywhere
too big
I'm gonna drill that okay is that a
little bit somehow I need to get it
centered up there
yeah put it through the hole in the back
you know if you get it off-center
major problem the good thing is though
it's all covered up by a cover nobody'll
ever even see it if it's a if it's off
we'll do this by hand to try to minimize
over drilling surely to God it wasn't
that easy
now they drill a little bit do you think
the fans gonna win or we're going
[Music]
get it started in there then let's
tighten up on real good and see that
it's making plastic remove there it is
boys and girls oh hell oh hell Donny the
only thing that would have screwed that
up is if the pan would have turned the
wrong way then we had to mess with the
other band we could have cut the end of
the blades off flipped it around Dwyer
all right
maybe perhaps you remember how it goes
together yeah that sucker up the
green yeah green when went on there
somewhere the white one and the red one
the white one one on one of these two I
don't know which one probably don't
matter though yeah it might turn on
immediately
well the hell with something blue give
it the other ones aren't okay stick to
point one in there like so keep your
fingers out the way
boy and you can't do that because it
goes backwards can't do that Mauro
because it doesn't go that goes the
other way now couldn't be maybe you can
mount it upside down yeah it goes like
that
but the wires are backwards so you might
have to mount it upside down it
originally was like that yep because the
wires was done
hey you don't make us don't do it you'll
make a live look in here just a mallet
upside down he'll be all right
and by the way people now I know that we
we have a stuff sometimes but we didn't
half-assed this one the dude on eBay
half-assed this one okay I might put my
ground wire over here so all of them is
on the same side
[Applause]
they will ever get his name and put it
out there yeah we're all 47 people to
see that suck it especially if this
doesn't work if this doesn't work I'm
blaming him it does work I'm taking all
the credit
yep well would you look at that and it's
whisper quiet what do you think I mean
now is it spinning the right way yes
which I guess would be right we're
unplugging it again we got to get it a
little bit more tidy we're gonna clean
it up as we put it back okay so we
cleaned it up a little bit we haven't
put the bottom pan back in but we
cleaned it up a little bit and it's
blowing nice cold air Donnie
check the bottom and see if it's blowing
cold air down to the bottom yes there's
a bullet right in the middle
the help
we don't quite know how it even works
people but Oh Evan yeah I feel it
yes it is blowing cold air down all
right so we're gonna put the trade okay
we got the tray in the Shelf in we're
letting it soak and Mean Green while we
clean it here and it's blowing cold so
hopefully that will fix it so we have a
12-pack today okay over here that's one
very test we also have water
look it's liquid we're gonna put it up
in the freezer and we had this one we're
gonna put it down and we'll see at the
end of the day what's going on hopefully
it'll look it was already freezing the
top but it was it was freezing up the
coil which makes it not get anything
cold actually because it uh the
refrigerant and everything is not
working like a chew so we think we're
good but we'll see
[Music]
[Music]
the problem here we got in this place
the screws are too long
whoever put this in maybe it had a trim
piece or something you know to look to
do this but they're all the way tight
and they're too long so the way to fix
this take them out and just about every
one of these wire cutters has these
holes and look over there under the
lights we can see better I want to see
what you're talking about here Donny
every one of them's has these holes in
it touching the thread pitch what that's
for is you take your screw and you screw
it into whichever one and this one
happens to be in 832 you screw it in
there
Ted how much was sticking out about that
much sticking out so that's about as
much as we got to cut off so we'll get
that going out the back side like so and
then you had your eyes and then you just
squeeze okay
and that's cooked back through does your
slug and then you take it back out and
you had messed up the threads okay you
don't want put screw back in
now it's time the top take it back out
open you cut them up to the right depth
screw it in there did you get what you
want sticking out the back side cut it
off blows it make out for quite as long
so when you go to buy tools sometimes
the extra dollar to for the tool might
be worth it does little stuff like that
the real cheap ones if you try to cut
screws in half it probably won't work
it'll probably be in the machine have
been the tool but these cut them no
problem now you're happy it's good to go
all right so now you got have any more
less 14 so out of everything in this
place what wasn't messed up yeah you're
down that you even have to mess with the
screws on the handles he keeps saying it
but I'm not so sure the stove seems to
turn on history stutters and also the
the little knobs the little butt and it
all needs cleaned it still good so the
we got to put some laminate on the
kitchen counter there we have to put the
the sink in wait no the sink
sank was there but the faucet was
screwed up it was leaking we got to
replace all of the outlets there was
something with the window oh yeah he had
to he had to put new yeah all the stuff
the trim and the window this is just in
the kitchen
the of course everything's dirty and
clean all that and there were something
else oh the refrigerator was bad oh yeah
with all broke up yeah that's right so
that was messed up
so there's hardly anything in this
kitchen oh yeah big huge hole in the
floor that's bigger than a regular event
yeah so they had wall events on it but
they don't really support any weight so
they're not supposed to be in the floor
because you step on it and from what we
understand the woman that owned this
house was big one very big lady
yeah that's fine but uh she would be so
that thing was bent all to hell so yeah
we're working on the kitchen a little
bit Donnie's fixing the handles we're
going to order a this refrigerator here
that yeah the motors messed up in the
tube that's three how many's left
pointing he's not even keeping track
hey did somebody replace those outlets
on the wall darling I did you remember
about that yeah
Toby boards not fine well yeah I did do
that I did the one behind the
refrigerator dude yeah you did these I
don't think you did that one because
it's Gia five or something they do look
brand-new
so I must have done it all right so
we're gonna do all of the handles I've
done it we got one last thing to do here
in the kitchen now it took me months but
I found this laminate look it's the same
color now this is a little more faded
because it's old so I found this and I
got it online and if I color matched it
and it's the perfect piece to go from
there to there look at that so we need
some glue and we'll glue that on and
then we'll be done well why didn't you
tell me that two months ago I've been
looking for it for two months now
yeah I quit please comment rate and
subscribe before you turn that off
