The way I move the gooseneck trailer with both axles locked up

My Brother Donnie
257 followers
1 Video View·Jan 13, 2025
gooseneck trailer things a 20 I believe
it's a 25 footer I bought it on Facebook
it was in a fire and had been burnt and
it burnt the wood off of it Yatta Yatta
Yatta Yatta got it pretty hot
the trick was nobody can move it and
it's too long and it's too wide for
anybody on a robot I called 34 people
and I told him I needed to go pick it up
told him what it was and they told me I
was crazy it was longer than the robot
they wouldn't even attempt it axles was
froze in it because it got so hot it
melted the C's the bearings basically in
it I went down there and tried to take
the hub's off I couldn't get Tubbs off
the hub would not come off I beat on it
and beat on it and beat on and had the
boat off or the center boat off and beat
and beat and beat and beat and beat on
it and it would not come off so what I
did I had this hey dolly y'all know what
hey dolly hey dolly so I took this hey
dolly see it there
and it's here that cradles a bale of hay
you can see the ton of the horseshoe
shape here it's supposed to have a
tongue on that side you see word right
there where it mounts up so what I did I
picked the back of this thing up and I
slid the bar right up underneath that
well I got a big old Miller welder on my
truck
see right there I welded it tacked it in
place there and I tacked it over there
and I tacked it over here too so I took
off I had that thing under there
I had it come back over here
talk to mangle iron it was holding it up
you can see it there was holding it up
off the ground up off the ground from
here to that gooseneck way up there
about 35 feet I pulled out on the
two-lane highway and when I did my god
you got a like a 13 foot flat bed on it
so I've got that 13 foot I got 8-foot
neck up there then I got 20 foot of deck
here and then I've got another 5 foot of
dovetail back here so I've got 20 and 8
is 28 and then I've got the trucks 13 28
and 13 is 31 41 plus the cab probably
knows ate food so I'm right at 50 foot
I pull out of a residential Road and try
to make a right well when I did I hit a
chick over on this wheel right here
which only had that spot welded there
here and over there when I did it drove
this tire back you see it sitting in
there crooked
this side got a big gap on this I don't
have any I drove the whole thing here
drove all that back when I did it broke
that well so what broke that well that
weld held that weld held well
immediately this tire blew that was here
so I had to call and get another tire
brought to me well one I did now I got a
compensate for this thing being over I
tried to pull it back with a come on I
trying to compensate I had to compensate
for this well the only thing I could do
was pick it up get it up in the air to
get it away from that tire to get that
tire to run underneath that i-beam it's
the only way I could do it I'm sitting
on the side of the road at this point no
equipment no nothing so I got a old
bottle jack I mean an old bumper Jack I
jack it up I started looking in the back
of that truck trying to find something I
can weld in there well all I could find
was a brake chief
isolate that breaks you enough and
welded it down there on the bottom and
welded it up here across there and that
held it up well when I hit that Chuck
over the first time we've that back of
that thing was sitting right there you
can see where it meant that bent that
out a little bit that sawed it didn't
hurt it because it didn't it didn't
drive it that way he just drove this
side of the back that side it was trying
to drive forward but it couldn't because
that bar was up her opening so that side
has got plenty of clearance I offset it
just ever so slightly when I put it on
there to begin with cuz weaves on a hill
and I was trying to hurry up and get out
of the guy's yard you can tell that one
is way over there against a frame rail
and that's what's kind of out here and
wally land so when you get over here how
much room I got over there I got plenty
find I had that over some more that way
I would have had plenty of room to begin
with but I didn't this thing you see how
it's sitting on his heel here sitting
sideways kind of down in an angle he was
doing the same thing at that guy's house
and when I set it there it slid down
before I realized that I had a machine
back here picking it up and it slid down
before I realized and I just welded it
up and I had about an inch over there
when I started had about an inch
clearance over there on that side but I
got it here and I reworked this front
axle the back axle been on for the black
dude sorry work that action and though I
got the front axle turning in it
so I need to cook my hey dolly back out
of the back of it and get it out from
under but I just haven't had time to do
it and this actually there's the one
with the nut off the nuts all well and
it won't come out you can do whatever
you want
now this front one the way I got it you
know I took my cutting torch
see if I can get your video here put my
cutting torch and cut the backing plate
out and when I cut the backing plate out
then I took my cutting torch and went
right in right in beside the the spindle
and just cut that front bearing out or
die cutting door split it in three or
four places and brought it out in little
pieces
took the cutting torch in the back and
busted that back bearing - once I got
that front bearing out of the way I was
able to slide the hub all for the
bearing is itself and then I put new
bearings and put it back together but I
do not have breaks on that front axle
which isn't a big deal
you only need breaks on one axle really
I mean it's nice to have them on
everything every actually you got but
you 90% of trailers only having my
warned accident so I only need it really
on one axle if I couldn't matter is most
of my trailers don't have any brakes on
but I brought it home I've sanded all of
it painted all of got it already
got the wiring in it brand new wiring
all the way to the back got all the
lights and all that stuff for it then I
got tired and I got busy on other
projects and I ain't got back to it
here's the here's the worm
who's the worm there's the worm got busy
just ain't made it back to you
it's a Bentley
it's a oh four model
14,000 pound gross gross weight 12,000
pounds axle yes I have CD else but that
being behind a farm truck I don't need
CDL so I won't never put it behind safe
districts because this trucks got a
regular license plate where that trucks
got a form tag on it so some things you
got to think about being a farmer like
that trailer has got to go with that
truck or it could go with the red truck
too
but it cannot go behind this one unless
I bumped well no he can't go behind that
one regardless it's got to go behind
that other one but that trailer since it
don't have a tag on it
it can't go behind that truck neither
it's got to go behind them trucks
because they're farm trucks and you
don't need tags so there's a bunch of
little rules that you got to figure out
how to get around
