Donnie Replaces The Front Door on the Mobile Home, it looks so nice now!

My Brother Donnie
258 followers
2 Video Views·Jan 13, 2025
okay we're going to take this door out
and replace it I have started work on I
took to the doorframe under the screen
door frame off but now we got to figure
out how to get this door out and get it
replaced I'll be back with you here she
went okay I know the lighting is
horrible but is what we got going on
there's three or four things that should
happen here number one that I've learned
number one don't come to work with happy
tools okay number two is that this is
the original frame and the floors are
rotted out
so somebody replace this board and
didn't put it underneath them the
threshold this is glued in to the point
you can't get it loose you got to fight
with it to get it loose and you see this
tar paper here I know everybody said
just cut the tar paper cut the tar paper
well you really don't want to cut that
if you can help and down here show you
what you're dealing with look how much
coke is almost it's like inches of coke
now I'm trying to cut it with a
pocketknife and it don't work well she's
brought it pretty good we got the frame
out of it we did have to tear some of
the paper but we didn't tell her it off
so we're getting them be back with you
shortly
well I found this inside the door looks
like this is a 34 by 76 right hand and I
guess it was white to begin with it is
an aisle but that's what it was so to
all the people that didn't think I knew
where the room was it is right there and
it is fixed I've put a new piece in
I've got it ready to go back now they
claim this is very easy I had I saw with
one battery with two bars left and I've
got a drill with a full battery and I do
not have no charger with me and I'm not
worried in the least but I'll see y'all
here shortening they say all you do is
pick this door up and slide it in there
and put a little beautiful tape around
this edge and you're done
so we're gonna see how true that
actually is I will let you know here
shortly around this edge all the way
around but we should be good to go here
in just a few minutes okay I got a
little complaint I've got this big old
photo but it is cobalt big old kid and
they give me squares and Allen wrenches
and fill ups and regulars and they give
you these sockets up here they give you
five sixteenths they give you an eight
they give you a 3/8 they give you 7/16
they give you a half but they don't give
you a quarter now they know everybody
usually won this thing use a
quarter-inch I don't know what they were
thinking so now I'm gonna have to use
this and you know it's gonna tear it up
soon as I use it but I have to have a
quarter inch drive socket and I don't
have one
so we're gonna make this okay here we go
we got a bag of goodies here and we've
got the door but we have to get this
thing installed we got about two hours
before we have to be over at a
fundraiser for a lady in town that needs
some help with some medical bills so
we're gonna go buy as a couple $5
[Music]
sounds expensive but it's very good
cause so we'll be back shortly okay
here's a butyl tape it looks like it's
like great we got a roll of this and
we're gonna put it right around this
edge I'll be back here in a minute okay
I'm here by myself today and here's my
door and I've got to get it over here I
got my butyl tape on as you can see I've
got to get it over here and walked in
this hole make sure you have all your
tools out here with you I got my
screwdriver there pencil here so my
level pair pliers just in case and I'm
gonna try this and let's see what
happens here
here we go okay I got it up here on top
step and got it out there in the tool
box I'm gonna stand it up and see if I
can pin it around and kind of walk it
right in there by myself we'll see here
we go okay here we go
yeah that I can work now cookie daddy's
Oh
but looks pretty good
a couple problems I'm one my steps are
gonna be too hot but it needs to come up
come up exactly one inch on that to come
up one inch all the way around what I
need to do is go inside and then do this
but I'm scared if I go inside the damn
things will fall out what ain't got no
choice
guess what we locked the back door the
keys are in the house
[Music]
mm well I'd figure this one out and
y'all thought I was kidding about keys
right there they are first time for
everything
well what I've come to figure out that
this threshold needs a double border now
there's a little piece of one left on
this side want or want or that trash out
of there but I assumed it was on the
bottom of the door well you know what
assume does yes it did it to me too so
let's cut another one put it down here
three-quarter pick that door up a little
bit and get this butyl tape back on that
we ripped off and with that take the
door back up and see what we can do so
how many of you has done this trick you
have your board that you need to cut and
you got it sitting up on the steps here
and you're trying to hold it with that
foot and we're on your circular saw
where you can cut it don't worry about
it a lot of people's done it have you
foot on the block have you food on
something trying to cut it here's the
trick put a screw in it
and then you don't have to worry about
it you know I said I was worried about
batteries I still got two lights and
we'll make it cut and when I'm doing I'm
probably still gonna have two lights
like I said I made the cut
there we go still two lights 36 inches
in three-quarter inches in three-quarter
inch marine-grade plywood no problem
and something I could be doing this save
the battery you see I've got it set on
about full dip there I could cut that
back to where it's only cutting through
three quarters and wouldn't be dragging
the rest of that blade through there and
it would probably last a little longer
but you know that's what we do out here
so it's in sorry you didn't get to see a
play-by-play but this one's the trick
here I'll put this down on this corner
up on the meet the door and then I could
step on it and as I push my foot down
and push this side of the door up which
made it work a level it up and it's
level now
I'm gonna have to talk real good
underneath it and get close to that
threshold get it all caulk down and get
it get whatever I need to under there
and make it you know shims or whatever
in this corner here could get it right
it's just me and my brother working this
weekend so when he gets here I'll have
him get some shims and shim it up and
get it right okay it looks like I'm
making headway I had to break this end I
had to break this end off oh come on
really tell me I wouldn't take that out
before to put the door in there there's
a steel pin can you see it well it
worked
a big baggage we gotta track it off the
door and of course it's around the let
me let me get my knife out cut this
stuff off okay now that we got the door
open
he's a little black speck so the door
looks pretty good you look here on the
hinges they didn't put a screw there nor
there nor there or there what they want
you to do is put big long screws in
there so they go through this Jam and
they go into the wood firm want to
figure out how to get the rest of that
out - there it is it's secure it's got
the one door lock in it right there like
I said we're gonna have to cut this deck
down to get to where we can open the
door I'm missing one screw up there I
didn't realize the screws runs up and
I'm still got the look right there
there's a lock and lock up there I gotta
take off but I'm gonna leave it like
that for tonight we'll get back on
tomorrow
just as like I said to chilly dope and
some chips on a Little Debbie it's for a
good cause
let it here in town cannot pay her
medical bills so they're having a
fundraiser for so we contributed because
they've been putting insulation on it
but it's the wrong stuff so I think this
may be the original insulation here so
what they had done was they took a bunch
of the rolled up phone and just stuck it
all over the inside all the way across
and in some places it was double thick
and everything and so the effect of it
was was the door wouldn't close all the
way so you know yeah you need insulation
but the whole purpose of it is to be
nice and flat and make a nice flat seal
on the door so just a little bit of
insulation is better than having this
much insulation and the door won't close
because then you're getting air in it I
mean we're going around cleaning all
that off the track then we'll see how
the door closes then and then we'll see
what kind of insulation it needs you can
see they still got their stocking all
over the edge of the door and just yeah
what are you doing so we're gonna clean
that off and get it where it'll close
nice and flat and we can lock it and all
of that good stuff and see what we get
into there
all right so after removing all of the
foam that they had all over for the
freaking place get the channel a little
more clean
door shuts happens if you don't cram a
bunch of crap in the crack between the
door and the frame the door will
properly shut into the frame mmm that's
why that's why we're the experts at this
people clearly we don't know what we're
doing but we know that and touchable
[Music]
so it fits pretty good but up here at
the top it is to crack down a little bit
but I think it's probably because the
door is bent a little bit so we might uh
with a little muscle power maybe we hit
it with a little muscle power what you
think about that and then we're gonna
have to go outside and make sure
everything seals outside and wherever
the foam is actually missing we'll
replace it but I think it's all there
it's just they weren't happy with the
fit and finish
