Pottery: Throwing a Dog Bowl Pedestal

Making ceramics and glass
106 followers
Hey guys, it's Janice Wilson-Hughes. I'm here in my Evolution Stoneware Pottery studio,
and today I want to go over a project for how to make a pedestal to raise up a dog bowl,
so that if your dog is a little bit taller, they don't have to eat off the floor level,
which can cause some health problems. So I've made these for my dogs. I have a food bowl
set for each of them and then a joint water bowl. So anyway, this is one of theirs. So I've got the
bowl. It's completely separate, so I can still throw this in the dishwasher and then this
separate razor or pedestal for it. So what I'm going to make today is actually one for my mother.
She has adopted this really beautiful Akita Terrier mix, but she's a really tall dog,
so I need to make one a little bit taller than this for her. I've already made the bowls for her.
So what I'm going to shoot for is about an eight inch tall riser, about five inches across,
and I think I'm going to use about three and a half pounds of clay just because
I want it to be pretty thick. You know, I want this to have some weight to it while the dog
is eating out of it and pushing the bowl around on top. So that's what I'm going to do on the wheel.
And while I'm at it, I'm planning to try my clay opener that I just made yesterday for the first
time. So this will be the first time I've used it. You may have seen the video going around on this
project and the only thing that I changed in making mine was I did stick a cork here in the
middle section. So I have a little cork like this. I stuck it and really rammed it in there so that
I don't build up a bunch of clay in here. That's just because I use different kinds of clay and I
don't want to cross contaminate. So hopefully this guy will work and I hope that some of you find it
helpful for your own dogs or friends with dogs or family with dogs or customers with dogs to make
method of centering. This clay is kind of on the stiff side so it would actually be a little better
if it was not quite so stiff but it's been in my studio for a while.
That should be about right. Let's try this opening tool. I'll give myself a target here.
I'm not sure that worked so great and really I just wanted to try it. I don't need
to have a bottom in this pot so I'm going to go ahead and open up that bottom as well.
definitely want to leave a lot of clay at the top for the bowl to rest on. It's okay Luna,
you're a good girl. Okay, slow the wheel down even more here. I like to make these so that
they come in a little bit and then they flare out. I just think it's aesthetically pleasing
instead of a boxy cylinder for the bowl to rest on. Let me check my measurements to see how I'm
doing toward my target. A little wide, another inch and a half. I'll collar this in and pull
This is right at five inches wide and eight inches tall is right there so
doing well on that front. Let me just put a even out the wall. I'll put a little bit of shape into
there's bevels so that it'll press the bottom of the bowl nicely. Now I'm going to use one of my
custom clay tools, which you can learn all about in my other videos, to make some indentions in
here, make some zigzags in here. So here's my custom tool. I'm going to start at the top and
work my way down. This is definitely a case where slow and steady wins the race. Don't want to rush
about five and a half inches wide and our diameter is about four and a half and
almost exactly eight inches tall. So this should work out perfectly for my mother's dog.
All right, here's the finished dog bowl pedestal for my mother. I think it'll work out perfectly.
It's right at eight inches tall. It'll be great for her dog. So hopefully some of your dogs will
benefit from this and if you would like to know more about how to make your own custom clay pottery
tools or projects like this using them, check out my custom clay pottery tools DVDs and instant video.
You can get them on Amazon and you can get the DVDs from my own website evolutionstoneware.com.
See you guys later. Bye.
