Wire Sun and Cloud Earrings - Wire Wrap Jewelry Tutorial

Making ceramics and glass
106 followers
Hi there, I'm Claire and I'm one of the art tutors at the art centre. I'm going to be showing you how
to make a hand-built Moroccan tagine today for cooking. I'm aware that making pottery at home
you won't have loads of different tools and things so we're trying to go with some really
basic things with hand building that you know don't require a lot of materials. So the first
thing we're going to do for the lid of the tagine is roll out a piece of clay so it needs to be
leather hard when you're putting this together so I've rolled this out a wee bit earlier and cut it
out. I've just drawn around a large circle and cut that out and that's going to be my template.
So I'm just going to fold it in half and then in quarter and then I'm just going to remove
one quarter section of that. Okay so just using a paper maquette just to see how that's going to
work and just we're going to be creating a cone like top for this. So I've cut out my clay to
that size already and I'm just going to cut away that section and pop that to one side. I've just
rolled out on a canvas mat here but any kind of non sorry any kind of porous fabric or wood is
quite good to roll on. It just stops the clay sticking if it's taking the moisture out of it.
Okay so although my clay is leather hard it's still got a little bit of give in it so I want
to be able to join these edges together to form my cone shape. Okay and then I'm just going to use
a serrated edge kidney to score and slip this together. So lots of scoring just creating
a surface for that to stick to. I'm just going to move this one over and get a board to work on.
The board will just stop this sticking onto this laminated kind of surface here.
Now I'm using a red clay here just purely because that's what I've got lying about.
So it doesn't matter the most likely be a stoneware bag that you'll be sent out in your kit
just because it's multi-purpose and we'll just make all the items that we're doing in the six
weeks from the stoneware. But I'm using red clay so red slip. Okay and then I'm just holding that
together and then just pinching it almost together. Okay I just want to make sure that this
seam here is really well sealed so I'm going over it with the rough edge of my serrated edge kidney.
Make sure it's all scored together and just being careful not to lean too heavy on the pressure and
collapse this cone that I've just made. Any wee kind of sticky bits you get coming off in your
hands I can just use just to go over that join and just make sure it's all nicely sealed together.
And then I'm just going to go over it with the smooth edge. Okay and I just want to make sure
that it's really well joined in the inside also. So just painting over that with some slip as well
on the inside. Okay and then I'm just going to pop that to one side just now just to dry and
stiffen up a little bit more. Okay so I'll pop that out of the way just now. Now to make the bowl
I'm just going to use a pinch pot just to keep it really basic. So I've just taken
probably about this size of clay. Get a big chunk and again starting off as if I'm making a snowball
just really patting the clay and compressing it all so I'm not getting any air pockets in it.
So if you can imagine that I'm going to be pushing into this and pinching out around the sides to
make my pinch pot but we want quite a big base for this. What I actually did was for this one
drew around the size of my cone when I put it down just to give me a kind of rough idea to work with
for the base size that I was going to need and cut out that template.
So I'm going to kind of just try and get as near to that size as I can before I start
and I'm going to have a smaller base and then kind of floating up the sides.
So I'm already deciding that this is going to be my base. I'm working on that shape with my
hands before I even open the clay out. Tagine is a nice shallow dish so now I'm just going to go
in to the centre here pushing in with my thumb but again not going all the way through and I'm
just going to start pushing with that thumb on the inside turning it in my left hand as I'm doing it.
This is creating even walls here and even thickness the whole way down.
So that's going to take quite a bit of working on and pinching out
so that's one that I started a wee bit earlier on. So again I can use anything I've got lying
around about the house as well, old butter pot or even your rolling pin and you're just going to start
to work on getting that shape. Use this to bash out and thin out the walls.
Quite an important thing is that you want it to be nice and smooth inside if we're going to use it
for fidgets and you want to be able to clean it so I'm just going to use my finger and my knuckle
here just to push down and start to create a nice smooth base in there and just again I'm working
out the thickness of the walls of the clay compressing it and pushing it in and pushing it up.
I've got a lot of weight at the bottom of this dish just now so that's what I'm just trying to do
to push in and transfer the weight up the wall. I can just show you the inside of that there it's
starting to get a lot smoother and a lot kind of thinner round here as well. Now as I was saying a
tagine's quite a low shallow dish so if you feel when you're doing this rear hand building that
it's getting a little bit high then just use your knife just placing it in and just cutting it round
and again you can just bash that if you feel you've gone a wee bit higher at one side
just come down on the same level as it and just start to make sure and pat it down
and I'm working around the sides as well to try and get an even thickness on my walls all the way
round here as well. It's worth really spending the time and making it as nice and neat as you can
hand built doesn't you know mean that it needs to to be really rough we can get a nice finish on it.
Okay I can let that stiffen up a wee bit as well and go back over it and the inside particularly
with my rubber kidney just to compress all that clay down and get a nice smooth surface again if
it's going to be used for cooking food in we don't want any kind of you know grooves or anything where
bacteria could collect so just trying to get a nice surface. Okay so spend quite a bit of time
working on that I'm just going to crack on just now just to show you how we're going to create
a lip on this for the lid of our tagine to sit on. So again just pop that to one side just now
I'm going to take just cut a bit of clay out the bag and I've just squeezed it into a large coil
shape. I want quite a big bit because I'm going to try and roll out a coil big enough that it's
going to go around the circumference of this. I'll just take a little bit of this off it won't end up
too big. Again this is where your paper maquettes for working out sizes and things is great so I can
just have a wee practice round to see if that's going to fit. Again I want to try and make this
as even as I can and to attach it I'm just going to score around the outside of this. Again I'm not
using a lot of tools here so I scored one way and now I'm scoring the other just to and then
I want to score this before I stick it on as well. I'm just scoring down the whole length of it
and lots of slip to stick it on and again some slip on the coil I'm going to attach.
Okay then I'm just going to start to stick this. I'm sticking it on but I'm also just kind of
sliding it up slightly. What I want to create is like a little lip that the tagine lid is going to
sit inside. I'm just using my fingers just to smooth that together and then I'm just going to
go down to the inside pressing this little lip down and I can use my fingers again just to press
the coil onto that and make sure it's nice and secured and firm the whole way down.
Just using my finger to press down. This is what happens when you don't work on a board and it
starts to stick. If I just tip this up just to show you I've created a ledge in here that my
lid's going to sit in. Okay so I'm just going to pop that to the side just now and go back to my
lid again. Again you can work a wee bit more on this just to make sure the whole thing
has got a nice finish on it so once it's stiffened a little bit I would go over the whole thing
with my serrated edge kidney so it'll just get another turn to it we'll just say.
So I'm going over with the rough side of this first of all
and I'm just really wanting to try and create a nice even surface. I'm going with the rough
first of all and then turn it to the smooth side. Okay and I can also just go over it
with a little damp sponge as well. A little bit of water. I'm just making sure my edges are all
nice and smooth and not rough and then you could finish it up by going over all that and compressing
it with your rubber kidney and getting a nice smooth compressed finish. It'll be nice to decorate
on. So what I want to do is create a little handle on the lids here so I'm just going to take a bit
of the clay I had left over earlier and just roll it into a ball about that kind of size
and I'm just going to now put pressure on the bottom half of that ball so I'm
rolling it into almost like a kind of cone shape. I'm just going to use my table just to bash that
off get a flat top on it. So that's the kind of shape that I'm aiming for. I'm just going to cut
it down ever so slightly and then I'm just going to go in the centre as if I'm doing like a little
miniature and pinch pop. Okay and this time I've allowed my finger to go right through the base of
that. I'm just using a wee bit of water just to smooth all that and compress it all down make it
nice and smooth and then I'm just going to score it and slip it and attach it on to that.
So I'll just make a wee mark first of all where that sits and then I'm going to just score all
around that whole surface area at the top there just to make sure this really sticks on and get
some stuff all around it. Okay and then I'm just going to pinch in at the base of that all the way
down. Again you can give it a good bash just to make sure it's all kind of looking even on the
one height and you can use some of your modelling tools as well just to go around this and make sure
important a stage of it so the one that I had actually made last week in preparation for this
I let it dry quite slowly so I wrapped both separate pieces in a bag and just sat them
together just to let them stiffen up. I don't want this drying too quickly and for any cracks to form
and also it allowed me to go back over that and just get a nicer finish on it once it was a wee
bit stiffer. Again you can just use a damp sponge just to go over that again okay and you just want
to check that for size. Now I'm actually going to trim this back a little bit just to sit nice in
there. I always start off with a bigger circle template than I need because you can always trim
some off but it's not as easy to to add on to it and again anything that you cut needs to all be
to take off on that here. Another quick thing I just wanted to show you is because I'm aware that
some people if you've got like arthritis or any kind of conditions in hand you might find
it quite hard to pinch out a pot this kind of size so another way of doing it is again just
with anything you've got lying about the house. That bowl's just a nice kind of shallow dish as well
so just use a bowl and line it with just some plastic, a bin bag or anything and then I'm just
going to roll those out into smaller balls and press them in and you're pressing the other one
right up against it. You want to be able to ensure though again that the bowl's the same thickness
so I'm pressing each piece out to the same thickness. I don't want to have one bit that's
pressed out really thin and another bit that's really thick so you would just work away in that
until you completely fill the whole thing and smooth it together with your hands and again the
kidney to get a really nice smooth finish on it and again you can just use your knife just to trim
around the edge if that's all overlapping and leave that to dry and stiffen until it's leather
hard in the bowl before taking it out and you should be able to work from that as well. Again
just using the rim of it to draw around and to take some measurements. Okay so mine is still
quite soft but I want to just allow that to get stiffer and again I can really spend some time
and just working away and sponging it and getting a really nice decorating surface and then you can
have some fun just decorating it you know with some coloured slips and making it really nice.
The stuff you're going to get in your kit is going to be coloured slips or underglazes that
you can apply onto your greenware which is your clay that's dried out and it allows you to just
hand it into the centre to be fired and that will be a finished piece and we'll glaze it
for you with a clear glaze and give it back to you.
