Jump Rings 101: How to Use Jump Rings for Jewelry Making

Jewelry Making
51 followers
#JRings Howto #JumpRings #JewelryMaking
Today it's all about jump rings. Jump rings are an integral part of jewelry
making so it's important that you know how to use them and of course what they
are. Hi my name is Carol and welcome to my
channel. It is so lovely to have you here. Let's jump right in and have a look at
some jump rings and how you would use them. What I've got
in front of me is a series of jump rings, different sizes and different shapes.
I've also got a couple of earrings that I've used jump rings to create.
So let's have a look. This is the trinity earring. I've used jump rings here to
attach the rings together and also secure the little dangles that hang
in the center of the rings. I've also used the jump ring
to connect the ear wire in this case. In this little dragon scale earring
I've used the jump rings to connect the beads
to the connectors. So you can see that jump rings are used to connect things.
All right let's take a look at what I've got here.
So I'm going to start at the smallest side. Now jump rings do come in
as I said in a variety of shapes and sizes. Most
commonly jump rings are round or oval. So what makes a jump ring a jump ring?
Jump rings can be either open or closed. Now by that I mean
that they can have a split in them. If you have a look at this one here
you can see that it has a split in the top
which means it can be opened or closed. Some jump rings don't have splits and
they're called closed jump rings. So this one here
doesn't have a split at all and it's a closed jump ring.
So if you think about it you might want to open a jump ring so that you can
attach something to it. So if I take this jump ring I can
open it and attach loops and things to it. So that
is why you would use a jump ring. Let's start at the beginning. I've got a
four millimeter jump ring here. You can see it's quite
small and this is an open jump ring and this one is in a red copper color.
Next here I have a six millimeter jump ring
in a silver and also in a copper. Obviously these come in gold as well.
Now these are the most common sizes that people use
Having said that I do sell a lot of 10 millimeter ones as well.
For me personally I do find that four millimeter jump rings are quite
challenging when you have a lot of stuff to put on
to a component. For example I used four millimeter
jump rings here. Now there's not too much going on to this jump ring so that was
fine. There's only two things going on it. The
bead and the connector. But if I had a lot of stuff going on
I would find that quite challenging. So we've got four millimeter, six
millimeter and ten millimeter and I've got a 20 millimeter here as
well. Now you'll notice that there's different
thicknesses between the jump rings as well.
So the thickness of the wire that makes up the jump ring is called
the gauge and you can see here if I compare
these two jump rings you'll see that this one on the left
is made from a thicker gauge wire than this one on the right.
Those are 10 millimeter ones and that's a black one
and obviously a gold and I've got a 20 millimeter one
here as well. As well as that I've got an oval one here.
This one is a six by four millimeter jump ring.
Now I actually used oval jump rings when I made the trinity earrings
and the reason I did that was because with the
closed ring and the dangle and another closed ring going into that
one jump ring it actually was too tight to use a round one
so the oval one worked really well.
You can also get triangle shaped jump rings
and you can even get them in heart shape. They come in all sorts of shapes and
sizes so it's worth having a look if you've got a
specific idea of what you want to use the jump ring for
then go ahead and have a look and see what you can find.
Next I want to show you how to open and close a jump ring because this is really
really important. Now I have here two pairs of chain nose
pliers. Chain nose pliers are just pliers that
have a flat side on the inside so we don't want to damage the wire of
the jump ring when we are opening it so it's important that they're nice and
smooth there and the best way to open a jump ring
is with two pairs. So what I'm going to do is take one side
of the ring in one pair of pliers and one side in the other.
The reason that I'm doing this this way is so that I don't
damage the jump ring. To open the jump ring what I'm going to do is hold my
one hand stable and I'm going to move the other one. So I'm moving one hand
down and holding the other one just in the same place
and you'll notice then that the jump ring's opened and
then I can feed on something like a charm or whatever it is I need to feed
on. Now to close it you just reverse that
process so holding it and bringing your hand up.
Now if it doesn't close properly you can see there it's not.
What you do is you just wiggle backwards and forwards
until it closes and mine is now closed but I wanted to demonstrate something to
you. So if my ring isn't quite closed and
this one's quite a heavy gauge so it's actually quite challenging to
open and close.
So what I'm going to do here see that it's not quite closed there.
So to do that to close it properly what I'm going to do is wiggle up and down
and push slightly towards the other pliers as I
go until I feel it and you will feel it
kind of great against the other side of the ring.
Now it's important when you do open and close a jump ring that you don't hold
your pliers like this. If I hold my jump ring like this
and I try to open it I'm actually going to bend my jump ring
in the process. It's also important that you don't open it this way.
If you open a jump ring that way let me show you.
You can see now that I have lost the ring of my
the nice circle of my jump ring so I can never get that back.
No matter how much I try to manipulate this jump ring
it will never go back to the actual perfect
circle that it was before.
You can see there I'm having a real hard time with this
with this jump ring because it's such a heavy gauge
but if I push it push it push it push it push it
I'm getting it close
but it's not perfectly round like it was before.
So it's really really important that you know how to
open and close the jump ring correctly and that supporting on either side with
your pliers so holding it
holding it like this instead of like this is really really important
and opening and closing it up and down. If it's not closed you push in
as you wiggle up and down slightly and if it's crossed over you just
pull out as you wiggle up and down slightly.
Okay and you can see now I've totally destroyed my jump ring.
It's a completely different shape than it was when we started.
That's all I have to say about jump rings for today. I hope you found that
really useful and that it has helped you to become a
better jewelry maker. If you have enjoyed this video please
subscribe to my channel and like the video and of course
ring the bell so that you'll be notified every time I upload
new content which is about once a week. Also check out my Instagram
and my Facebook and I'll leave links for that in the description box below
and leave me a comment and let me know if you found this video interesting
and also what you'd like to see me make in the future.
Thanks for watching and have a fantastic day.
