Jump Rings vs Split Rings and How to Open Them - Easy Jewellery Making Techniques

Jewelry Making
51 followers
Hey everyone, it's Carol here. If you're new to my channel, welcome.
Today I'm going to talk to you about the difference between a split ring
and a jump ring and I've also got here an oval
jump ring which we will talk about as well. We're also going to learn how to
open them. If you like this video please subscribe
to my channel and ring the bell so that you will always
get notified when I upload a new video. First let's talk about the difference
between a split ring and a jump ring. I'm just going to pick them up with my
pliers because it's easier for you to see. So this is a split ring.
A split ring is basically two rings. You'll see here that the
wire ends there and it ends there so there's this
part here that is only one ring.
A jump ring is a round ring that has a cut in it. So if you can see
here at the top,
you can see there it has a split so that you can open and close
your jump ring.
This is an oval jump ring as I said and you'll notice that the split isn't
completely, it's on the side.
So that's the difference between them but let's
have a look at when you would use them. So at first glance
you might think that a split ring is a better choice for you to use
when attaching to a component like for example this one
because you might think well you know a jump ring can come undone
and it might fall off and that is a possibility.
However, while a split ring may offer you
perhaps a little bit more security at first glance,
it's very hard to open and to actually get your component on.
Also these ends not being tucked together can catch on your clothing
because that is actually quite sharp and it could catch on your clothing.
So split rings are generally not a good idea to use in jewellery making.
They're good for attaching zipper pulls and things like that
but not for jewellery making. Having said that I did tell you I would show you how
to open one so I'm just going to move the jump rings out of the way for a
minute and we'll talk about this. So opening a split ring, you've probably
done this with a key ring, it's actually quite challenging you've got to get your
nails in there. I've got a little tool here that can help.
This is for opening split rings and if you're
using split rings in your jewellery making
then I suggest you buy one of these because they make life really easy.
You pop the long plier or the long jaw through the middle of the ring
then you take the short one and you put it between the two rings
and then of course you can feed on a component if you wanted to.
It's actually quite a challenge to get it on there
because once you've got it on there you still have to move it around and
I'm just not going to go there. So that's how you would open a split ring if you
were wanting to use one. Now I've got here a really large jump ring
and the reason I'm doing it using a really large one is so that you can see
easily much more easily how to open one. Now just
to cover the security side of using a jump ring versus a split ring
if you are concerned at all about the security of your jump rings
use an oval one because they open on the side here
what that means is any tension is going to be on
the ends so they're much less likely to come apart.
So that's a really good use of an oval ring, reason to use an oval
jump ring. So now let me show you how to open
a jump ring. So I've got here two pairs of chain nose pliers one is straight one
is bent and what I need to do is hold with my
chain nose pliers the side of my of my ring. Now I don't
want to hold it like this because it's not enough support for my
ring and it will bend out of shape maybe not this one
because it's so heavy but usually it would and I'm going to I've
got a bent nose pair of pliers now you could use two straight nose
it's fine two chain nose. Okay so doing the same thing on either side
I'm holding the ring on either side and you can see the split
in the ring is at the top so I'm just going to turn my wrist
one up and one down let me show you that again
so moving my wrist one up and one down now when you're opening a jump ring never
open this way because you will destroy the ring so we're going to open
one up one down I'm going to pop on my little dangle here
and then to close it I'm just reversing that so
one up one down now what you will find is that sometimes they actually
click into place this one's not going to but
I can't hear it clicking but I can feel it because
as I'm doing that I can feel it rubbing up against
its neighbor the other end so what happens if your jump ring
is not closing if it's looking like this
so what you do is you continue to go up and down
and you just add a little bit of pressure pushing it together until you
feel that it is pushing up against the other
side very occasionally and this is very
occasionally you can give it a little bit of a squeeze that way
but it's risky because if you squeeze your jump ring that way
I'll show you what happens if I can with this one
so you can see that it's lost its shape and it has crossed itself over and that
is terrible because you will not be able to
get it back no matter how much I try I will never get this back to being a
nice round circle so let's have a go
pull it out it's not bad but you can see it's not
perfectly round like it was before so don't be tempted
I would do it if the I would only do it if the gauge of the
jump ring was quite heavy like this one isn't that attractive
okay so that's how you open and close jump rings and
or any loop for that matter and also instead of using a split ring think
about using an oval jump ring where the join is on the side
instead if you're at all concerned about
your standard jump ring not holding up to the challenge
sometimes what I do if I don't have any of the heavier gauge
jump rings I actually put two on and this can become a design feature
but it actually also works really well for security purposes because
the split in one will never be in the same place as the split in the other one
so that's worth thinking about too so this is a quick
short little video just to talk about that I hope you've enjoyed it
if you have please subscribe and I look forward to seeing you again soon
thanks for watching
