Wide vs Narrow Roller Skate Trucks for Park Skating | Q&As

How to Roller Skate
2 followers
Hi I'm Shorty and welcome back to my YouTube channel Shorty Skate Series. So this week it
was too cold to go outside and film a skate tutorial so I thought I'd go over some questions
and answers about wide trucks versus narrow trucks. So I got a lot of questions on my
Instagram and YouTube channel about wide trucks versus narrow trucks which is the best etc. I'll
try and get through all of them in this video. Please note that this is all based on my personal
experience so other people might have different experiences on why they like wide trucks versus
narrow trucks. One thing to note is that I'm quite short so I'm 5 foot 1 and a quarter and I weigh
about 53 kilograms so I do think body type impacts the way wide trucks might feel for an individual.
For example I'm a size 4 in Bont and with disco trucks the base of my skate looks like this so
it's quite square almost square whereas my husband who's a size 9 in Bont with disco trucks his is
very rectangular so you can see how the different size in foot can impact the way a wide truck might
feel for you. Are disco trucks the only ones you've used or can you share comparisons with other wide
trucks? So penny trucks and disco trucks are the only two wide trucks that I've used. I started out
using penny trucks with an Avanti plate and then switched over to disco trucks with a tracer plate.
So penny trucks are 3 inches wide so that's about 76 millimeters whereas disco trucks are 70
millimeters. I found that the six millimeters while it doesn't seem much actually made a big
difference as when I skated on penny trucks I felt like I was always going to clip my wheels like
that was always in the back of my mind but with disco trucks that doesn't happen so I feel very
confident skating on the disco truck. However this does lead me into the next question which is
does catching your feet in skates with wide trucks happen often? Can you talk about the
injury as well? So skating on wide trucks does take some time to get used to and with roller
skating there's always a risk. It might be a little bit higher with wide trucks because you can clip
yourself if you're not used to having your feet a little bit wider and staggered. I do still sometimes
clip myself with disco trucks if I'm not really paying attention as you can see in this clip here
but I definitely don't have that in the back of my mind when I'm skating on disco trucks whereas
as I said before when I was skating on penny trucks I did always have that fear. So for the
next topic I got quite a lot of questions. What's the difference? Which is easier? How is the balance?
Do you feel more stable on wide trucks? Which tricks or skate styles are easier or harder on
each type? So for me I like to skate wide trucks for the extra stability. So if I'm skating vert,
doing flips, landing big airs, having wide trucks gives me a bigger landing base whereas
compared to narrow trucks you can see it's a smaller base and your side-to-side stability
isn't as great. But depending on your skating style you might not need the extra stability.
So if you're not looking to skate vert or you have better stability in landing which I don't
especially if I'm doing spins, I need this extra wide base to help me not fall over. In terms of
sliding with wide trucks I tend to slide more flat like this because depending on what obstacle
I'm on if I angle it in too much my front or my back wheel will catch whereas if I'm sliding
with narrow trucks I can angle my foot a lot more before my wheels touch. So in that sense
sliding is a lot easier with narrow trucks than with wide trucks if you want to angle your foot
in more. But for stalling having wide trucks will give you better stability especially if you're
looking to spin into stalls like half cabs, full cabs and 360s. So for me wide trucks make it easier
to stall but narrow trucks make it easier to slide. In terms of agility and carving on wide trucks
of course wide trucks are going to be a lot harder than narrow trucks just because you'll have that
wider turning circle because it's so wide whereas narrow trucks will be able to turn a lot faster
just think of it as a car versus motorbike type situation. But when carving a line you're not
really looking to turn tight circles and for half pipes and vert you're more likely to be erring the
coping. So having the stability of wide trucks might be more important than agility which it
is for me. Grinding. Which is easier to grind? Are you still able to grind with narrow trucks?
Will wide trucks help me unlock rail grinds? Are wide trucks only a plus for grinds? So the
short answer on can you grind with narrow trucks is yes but it's sort of less grinding on the truck
and more sort of rolling on the wheels. Even if you're grinding with narrow trucks on a rail
you'll most likely be rolling on top of the rail rather than grinding. So I actually like
sliding and grinding with narrow trucks mainly because the coping or rail does lock into your
wheels here so you feel more solid and your foot doesn't sort of slip about. However you have to be
more accurate when landing on coping or rails so you have to make sure that your foot lands right
on top of the rail coping. Whereas with wide trucks you'll most likely be grinding somewhere
in between your wheels so you have a bigger margin of where you can land that rail or coping.
So that's why some people think it's easier to grind with wide trucks just because you can like
you can land not as accurately. However when grinding on rails with wide trucks
you can feel a little unstable at first when you're learning because you do have that wider space
so your foot can sort of like wiggle around a little bit or like go like this.
So some people do prefer grinding on rails with narrows but again it's a lot easier to land your
grinding tricks with wide trucks but it's sort of personal preference. For those who follow my
Instagram you might have seen that I've sort of switched up and combined the two best of both
worlds. For my grinding foot I have wide trucks and for my sliding foot I have narrow trucks so
that when I land I don't have to be as accurate and then for my sliding foot there's no risk of
me clipping my wheels with my narrow trucks. Of course there's a difference in weight so I'm not
sure how that will impact my body later down the track but for now this setup has been working
wonders for me so I'm able to try tricks that I didn't think possible on quads. So I guess the
next question is which one's better and I think it comes down to personal preference. So if you need
the extra stability and you want to be able to grind easier then go for wide trucks. If you don't
have any issues with stability and you want to be able to angle your feet easier then staying with
narrow trucks might be the best option for you. Also if you're able to grind with narrow trucks
then really there's no need to be switching to wide trucks just for the ability to grind. So for
me if I'm skating vert or doing big airs practicing flips I prefer to switch to full wide trucks
because I do need that extra stability because when I rotate I tend to rotate off axis and go
so having the wider base helps me. For sliding and grinding this week I've been experimenting
with one wide truck one narrow truck mainly because it's easier for me to land that grinding
foot with a wide truck. If I could I would if I was good enough I would wear full narrow trucks
just so that it would be easier for me to do royals and unities with the narrow because I have
to angle my feet like this or like this but I'm not at that stage so one wide one narrow is it for me.
How wide of wide trucks to get? So there are a few different brands of wide trucks out in the world
just for reference the bond prodigy or tracer plate truck the standard or narrow truck is
43 millimeters as I mentioned the disco truck is 70 millimeters and if you're looking to go
super wide like skating vert like massive mega ramp vert then you can go 100 millimeters or
10 centimeters so this is the disco truck wide super wide which you can take the 70 millimeter
off just have to unscrew these two bolts take it off and replace it with this one so it's super
easy if you want to go super wide. So that's all the questions I have time for right now
there were a few more on my instagram but I'll answer them in the description below also if you
have any other questions you can comment below and I'll try to get back to you as soon as I can.
So I hope this video was helpful in giving a little bit of insight as to wide trucks versus
narrow trucks and what might be right for you and thanks for watching.
