Building My Own Off-Road Roller Skates | DIY Skate Tech

How to Roller Skate
2 followers
Ever wondered what it would be like to transform your regular roller skates
into high performance all-terrain machines?
Well join me as we take the fun to the extreme.
Hi I'm Shorty and welcome back to my channel Shorty's Skate Series.
Today I'm going to show you how to mount these beauties to my Bont Quadstar Carbon Boots.
To ensure a snug fit, I'll be heat molding them but I'll cover that in another video.
I'll add a link in the description below.
First I removed the original tracer plates from these boots
as I'm going to replace them with an old Bont Ignite plate.
So the kingpin angle of these plates fits the wide truck pivot pin perfectly
and no modification is required.
Speaking of the off-road trucks, these ones are made by Huck's Skate Supply
and are designed to be combined with the Powerslide off-road wheels.
I'll add some links below as to where you can find these items.
Just note, if you do decide to build your own with regular wide trucks,
make sure the axle pole is long enough to accommodate your off-road wheel hubs
as they are wider than ordinary roller skate wheel hubs.
After heat molding my boots, I did have to drill new holes to mount my Ignite plate
because the holes are different
and additionally I opted for an oversized plate to enhance my front back stability
which means the plate will slightly overhang at the front and the back
but I'm okay with that.
Once my plates were mounted, I decided to also switch out my toe stops to something larger.
I went with the Bont Togo's.
You might think that they wouldn't touch the ground with such big wheels but they do.
It's at an extreme angle but low enough for me to use if needed.
Next, I installed the trucks.
The only adjustment I had to make was to place the shorter cushions closer to the boot
and the taller ones after to ensure the pivot pin sat correctly.
With the stock Ignite trucks, it was the other way around.
And then just tighten the nuts, repeat the process and voila!
My off-road roller skates are complete.
So I couldn't wait to get them on my feet
and I took them for a little spin around the streets near my house.
I hope in the next couple of days I can go for a longer roll.
I want to go faster.
I want to go down a bigger hill because the adrenaline and the uncertainty
but also the freedom and excitement is a whole new level of roller skating
and I can't wait to do more.
