Crazy Tracked Heavy Duty Hand Truck!! || Riosoc

Tools plus
2 followers
Check out the crazy dolly. Stair climbing with extra functionally with a little creativity! Full overview and quick demo. What would you use this for??
#machine #tools
Welcome to Projects For All, my name is Mike and today in this wooden crate I have a stair climbing
battery powered hand truck to show you guys. This is the only wooden crate I've ever received in my
entire life and we're going to get it up on the table so we can see how bad FedEx destroyed it
and then we're going to get it out of there and put it together. If we have to we'll test it and
see if it's any good. I would be totally lying to you if I told you I knew what to expect with this
one because I have not seen this obviously. FedEx really jammed this one up. I guess we don't need
the drill and uh yeah this is the better side. The more messed up side is on the bottom.
It's the plastic straps we're always holding together.
Very nice looking. It looks like there is pretty much no assembly needed.
Got a box of something here. Probably a charger. Yep 24 volt 2 amp. A color manual which is always
appreciated. It would appear the wooden crate thwarted FedEx's plan and this looks like it's
in pretty good shape. Nice looking casters. Nice looking powder coat. All right let's get it out
of here so we can have a look at it. So the first thing we're going to do before we check all this
out is unplug the battery charger which is right here. I have it plugged in. The plug is here on the
back of the battery and all we do is unplug it. This will be red when it's charging. Now it's
green so we know it's charged. This wasn't fully depleted so it had like a one bar left to charge
so I don't know how long it actually took to charge it because it wasn't totally down to zero.
It's got a pass-through like a little computer fan in it. Not bad. Still it was pretty quiet
at charging. Hook it back up. This is actually power in and power out so we have to plug
our controller back in and there's a little thumb screw. I've been testing this for about a week
goofing around with this thing and this so far is probably my least favorite feature but it's
not the end of the world. It would help if it wasn't set inset in here and you'd have a little
bit better grip on it. I zeroed out the wixie gauge on the table so there's the angle of our first
position and then we have one more and there's the angle of our second position. At full deployment
you're 15 degrees. What we're looking at here is going to make more sense right now because as I
stand it up. So let me set the brakes so this thing doesn't roll off the table because it rolls
very easily. It has a seat belt style pull down for whatever you're going to put on this so you
don't need a bungee cord or you don't need ratchet straps unless you have something oversized that
this is not going to work with. But this gets pretty big and you can fit something definitely
oversized that's bigger than this platform. These are your lock downs for when you stand this up so
now it folds when you stand up these snap in one on either side and now it's locked.
It's the underside of the deck. Four casters one two three four on bearings. These are hard rubber
with plastic wheels but they feel like nice quality and they are just bolted through
this heavy stock here so if they have to be replaced they have to be replaced no big deal
you can just unbolt them and bolt four more on. The wheels on the bottom are also hard plastic
and very nice they run real smooth. Our 24 volt motor is brushed here's the holes for the brushes
here this runs this axle down here this belt is has teeth on the inside also and it runs in these
cogs here. I can't imagine this belt slipping on here. It looks like a pretty stout setup honestly
and I don't think you're going to have too much trouble. Like I said everything here is heavy
stock all the metal on this is thick heavy metal. I expect the frame of this thing to last you the
life of the tool. The wheels look easily replaceable. Motor is bolted in heavy metal here this
axle isn't heavy metal. There's your key just a regular blade key. The keyhole is here which
is accessible right through here if the tracks are in the upright position it's no big deal but
to make it easier to show you guys I'm going to tilt these back you turn it once to the right
it's going to turn on your light here there's a button here that allows you to check your
battery charge and that's it now you turn on the power on the controller up here and you're good
to go turning this key back one and flipping up the little handle on the battery allows you to
release your battery so if I unscrewed this then we could take the battery say in the house and
charge it in there if we want connected to the ignition so when I turn that back it pulls the
pin out of this hole here and allows you to remove your battery. Not a bad design actually
just slides back on handle flips down and now the battery is secure once we have our key on
and we press power on the top we can immediately start using our tracks both side wheels have a
lock press on and it is very much locked it will not move off easier to do with your foot than your
hand but now super super smooth rolling it glides and the casters on the bottom I'm going to show
you in a second those are very nice too there's your teeth on your inside of your belt and on
the top side here this cog here could be adjusted here for tension so you got a little bit of travel
left if these stretch out a little bit which uh man these are pretty heavy duty I can't imagine
there'll be a ton of stretch but I mean if you use this a lot there may be and there's your way to
adjust the tension now that it's on the floor this might make a little more sense so you have
turn the key on light comes on check your battery fully charged there's our power button when we
press that light comes on and now we have up and we have down and it's that simple
we have the handles that just deploy press the button this is thick metal by the way on a spring
so we can deploy our handles if we want we can easily fold them back down
if we raise this we go from four feet to almost six the thing is almost as tall as I am this is
probably even though this appears to be thick metal there's probably one of the weaker links
two-piece bed or tailgate can I get this up in my truck so let's give it a shot I'm gonna leave
the tracks straight up and down and tilt it back and I think that's our best bet because it's gonna
have to get a little bit of an angle not bad that was super easy like impressively easy
no problem no problem this thing's awesome one thing I really like about this is if you tip
back you don't have to push the wheels over the edge in there per se you can but the treads catch
you also because it has casters if you're on a landing you can just pivot the other interesting
thing is once you stop on the stairs the treads do not move enough to where I can sit on it
on the stairs here and not worry about it moving at all this one's a little tough because there's
not a lot of space but it does pivot nicely in that small space this is 50 gallons by the way
probably weighs I don't know it's mostly empty so I would guess about 150 pounds but it will just sit
there it's not moving a muscle it's on the stairs not going anywhere you can walk it on the treads
too on flat ground so you can back up off the stair technically you could walk it up to the
stair on the treads and then back down if you wanted to it's totally effortless to do this
so you guys tell me what you think I'm really really really impressed with this as long as
you apply a little backwards pressure to this and don't let the table move this thing will climb
right up here it's pretty amazing actually it weighs 50 pounds in itself the table saw I think
is around 220 or so so that's 270 pounds up the tailgate which is pretty steep up the stairs with
that table saw zero trouble it's just goes right up it doesn't uh it doesn't act like it's under
a load it just climbs the treads are thick and they're fairly sticky so it goes up the decking
on my back stairs no problem even though there isn't a sharp edge it climbs up this because
there is a sharp edge and it's able to get a tread on here and grab and pull itself up but
man this thing is gonna be seriously seriously useful for loading table saws and heavy stuff
in that truck and I'm pretty excited to have it you guys tell me is there something specialty
wise that you would use this for I can't say a bad thing about it honestly I think it's really
really cool and all this stock is thick it's heavy I don't see a failure point on this
but time will tell because this thing is a keeper around here for sure I move a lot of heavy boxes
hit me up in the comments tell me what you guys think if you like the video hit subscribe hit like
it helps out the channel a lot and we do a ton of tool videos we're always doing something new
something different we do a lot of table saws thanks for watching I'll see you in the next video
