Carbon Dioxide battery technology represents a huge opportunity not only to vastly improve energy storage and output capacity, but also to capture CO2 straight out of our atmosphere and lock it away. Research is going on all around the world but in the last few weeks a research team from UIC in Illinois has published a paper proving that a Lithium Carbon Dioxide battery can now be recharged successfully and hold far more energy than a traditional battery, and another team working at MIT in Massachusetts has shown us a revolutionary system that significantly improves the efficiency of capturing pure CO2 from ambient air streams. This week we take a look at both of them.
Help support and influence the growth of the Just Have a Think initiative here: www.patreon.com/justhaveathink
Right now there's a lot of very smart scientists all over the world trying to figure out ways to
make batteries more efficient as part of the relentless quest to provide the energy storage
that renewable technologies and electric vehicles are going to need in mind-boggling quantities
as those two revolutions continue their explosive growth. In fact we looked at one of those research
groups in the last program which you can watch by clicking up there somewhere. And at the same time
there's another group of very smart scientists trying to figure out ways to remove carbon dioxide
from our atmosphere as part of our desperate attempt to keep global atmospheric temperatures
to below two degrees celsius above pre-industrial levels. Those two technologies have been converging
for some time and in the last couple of months they've reached collision point in the form of
carbon dioxide batteries. So what exactly does CO2 battery technology mean for the future of energy
storage and climate change?
Hello and welcome to Just Have a Think. Two major scientific papers have been released in the last
couple of months both of which demonstrate revolutionary new ways to harness the power
of carbon dioxide to help us in our battle against carbon dioxide. Back in September
researchers at the University of Illinois revealed a lithium carbon dioxide battery
that boasts a far higher energy density than even the best current lithium-ion batteries.
Tesla's 2170 lithium-ion batteries are generally reckoned to be about top notch in the EV battery
world with an energy density of 265 watt hours per kilogram. But the team at Illinois say their
battery carries 1876 watt hours per kilogram which is more than seven times higher than Tesla.
In fact these kinds of batteries have been cluttering up scientific laboratories for some
time and they've even got a collective name. They're called beyond lithium batteries. Lithium
oxygen batteries are another breed being actively pursued as is a lithium sulfur variant. A lithium
carbon dioxide battery of course has the distinct advantage that it uses carbon dioxide which the
scientists tell us is a good idea. The problem with chemistry though is that one way or another
whatever you put in at the start of a reaction has to come out at the end of the reaction,
albeit in a possibly very different configuration. When lithium CO2 batteries discharge the product
is typically lithium carbonate and carbon with a catalyst at the cathode speeding up the diffusion
of the CO2. Those products all balance the chemical equation out nicely and everyone's
happy right? But when a typical lithium CO2 battery is being charged up, while the lithium
carbonate recycles nicely back into its original constituent parts ready to go again, the carbon
tends to just stick to the catalyst on the cathode and that quickly clogs everything up
and causes the battery to fail within only a few charging cycles. So the researchers at Illinois
used new materials in their experimental battery to help encourage the recycling of both the
lithium carbonate and the carbon. For the benefit of the sciency types among you, specifically
they used lithium as the anode and molybdenum disulfide nanoflakes as a catalyst coated onto
a gas diffusion layer to form the cathode. The electrolyte was made up of ionic liquid dimethyl
sulfoxide solvent with a lithium salt and that's an electrolyte solution that the scientists
demonstrated as being able to get the carbon back off the catalyst and back into the recycling
process again. And all of those modifications mean a battery that effectively recycles all
of its components properly and results in 500 charging cycles with only a 5% reduction in
capacity. And don't forget you're getting seven times the energy density in this battery compared
to a normal lithium-ion battery which would mean our phone batteries could be shrunk to only one
seventh of their current size for the same energy output. Or even more exciting still, without
increasing the size of a battery pack in an electric vehicle it could deliver seven times
the energy to keep you going. And those advantages would translate across to grid scale energy storage
too. So this is potentially a pretty transformative development. At the same time as all this research
was going on another team of very smart scientists at the Massachusetts Institute of Technology, or
MIT, was developing a revolutionary new way to pull carbon dioxide out of the air using an
electrochemical process not dissimilar to the technology being developed at Illinois. Carbon
capture and sequestration isn't a new concept. In fact it's one of the key elements in the IPCC
recommendations for climate change mitigation. But existing methods tend to rely either on a
chemical process called solvent scrubbing using amines, or on oxyfuel combustion. Both these
techniques only really work on a gas stream that has a very high percentage content of carbon
dioxide, typically more than 10%. And you only find that kind of concentration in the flue emissions
of fossil fuel power plants or industrial plants. They're also very big bits of kit that take up
space in those facilities, and if they have to be retrofitted they usually require all sorts of
other modifications to be made to existing infrastructure and machinery. And the energy
required to run the process can sap as much as 25% of the overall output of the plant. As a result
the fossil fuel industry dislikes these contraptions intensely, and has been extremely
slow to adopt them at scale. But this new method is significantly less energy intensive and expensive
the researchers say. The device they've created is essentially a large specialized battery that
absorbs carbon dioxide from a stream of air or exhaust gas passing over its electrodes as it's
charged up, and then releases the pure CO2 gas as it's being discharged. A really big breakthrough
is that this new system is effective at virtually any concentration level, even down to the 400
parts per million currently found in our atmosphere. And that makes it a potential game changer in the
global race to mitigate the worst effects of climate change. One of the key ingredients here
is the use of quinones. Quinones are a class of organic compound themselves derived from
aromatic compounds like benzene or naphthalene. They're particularly attractive in this arena
because of their large redox potential, which is a measure of their ability to acquire electrons from
or lose electrons to an electrode, which causes them either to be reduced or oxidized, hence the
name. Each stack of electrodes in this new battery system is coated with a polyanthroquinone,
which is composited with carbon nanotubes. You know carbon nanotubes, they're the ones that
are kind of like graphene rolled up into a tube. They're particularly useful in battery tech
because they're a high surface area carbon material which significantly enhances the
overall conductivity of the electrode material and increases the area of electrolyte exposure.
As the battery charges up, these electrodes which have a natural affinity for carbon dioxide
react very easily with CO2 molecules in the air stream or feed gas, even at the very low
concentration levels we talked about earlier. And when the battery is discharged, not only do you
get energy out like a normal battery, but you also get a constant stream of pure carbon dioxide that
can be captured and stored. In a working plant, for example in a power plant where exhaust gas
is being produced continuously, two sets of stacks of these electrochemical cells could
be set up side by side to operate in parallel, with flue gas being directed first at one set
for carbon capture, then diverted to the second set while the first set goes into its discharge
cycle. By alternating back and forth the system could always be capturing and discharging the gas.
In the lab the team has proven that the system can withstand at least 7,000 charging discharging
cycles, with a 30% loss in efficiency over that time. And the researchers are confident that they
can quite easily improve that up to anything between 20,000 and 50,000 cycles, which would
be quite phenomenal. And then there's the energy saving which comes from the inherent efficiency
of the materials that they use. The new system uses about one gigajoule of energy for every
tonne of carbon dioxide captured. Energy consumption in existing systems can vary
between one and ten gigajoules per tonne, depending on the concentration of CO2 in the
air stream. And the icing on the cake is that the whole process operates at room temperature
and normal atmospheric pressure, so no need for expensive heating or compression technology.
This radical and quite revolutionary technological breakthrough was developed
by MIT postdoc Sahag Voskian during his PhD, along with Alan Hatton, Professor of Chemical
Engineering. Voskian tells us the greatest advantage of this technology over most other
carbon capture or carbon absorbing technologies is the binary nature of the absorbance affinity
to carbon dioxide. In other words, depending on whether the battery is charging or discharging,
the electrode either has a very strong attraction for CO2 molecules or no attraction whatsoever,
making both capture and release very efficient processes. And it's not just about giving
fossil fuel power plants yet another excuse to keep burning coal and gas. In some soft drink
bottling plants for example, fossil fuel is burnt to generate the carbon dioxide needed to give the
their fizz. And some farmers burn natural gas to produce carbon dioxide to feed their plants
in greenhouses. The new system could eliminate that need for fossil fuels in these applications
and in the process actually be taking the greenhouse gas right out of the air, says Voskian.
Alternatively, the pure carbon dioxide stream could be compressed and injected underground
for long-term disposal. So two very exciting and potentially game-changing technologies
on their way to a market that on its current trajectory looks set to become a multi-trillion
dollar opportunity for these new world pioneers. That's it for this week. Please do give us a like
and a share if you found the program enjoyable, and if you haven't already done so you can really
show your support for the work we're doing here by subscribing to the channel and clicking on the
bell icon to get notified of when the new content gets published each week. Absolutely free to do
that and dead easy of course, you just need to click on the subscribe button down there,
or click on that icon there. As always, thanks very much for watching, have a great week,
and remember to just have a think. See you next week.