A Miracle Restoration

Thomas Johnson Antique Furniture Restoration
41 followers
26 Video Views·Dec 24, 2024
I'm Tom Johnson Thomas Johnson antique
furniture restoration in gorm Maine well
I'm working on a new video uh Emily and
my Renovations are the third floor are
coming along great soon we'll be able to
start renovating the
shop so uh so what do I do all day let's
take a look this will just take a minute
then we'll get down to some serious
furniture
restoration for
chck is chicks hello chicks good morning
good morning
chick
chick yes yes yes
[Applause]
he e
[Music]
[Music]
oh
[Music]
[Music]
what
Ru come here R I'll give you a treat
yeah
[Applause]
yes such a good
dinner for two
Chi
is thank you
[Applause]
[Applause]
I also like seeing some of the projects
I've done
previously This Tall clock case fell
over and was damaged and cracked so
badly we were really wondering if it was
even possible to get it to go back
together again but I think it worked out
pretty good this is a nice tall case
clock uh the me name isn't on the clock
face we don't know who made it I don't
even know if it's English or American
it's probably early 19th century and
what happened was this clock fell
forward and uh sustained some
damage the most noticeable thing that
you first see is the obviously the glass
broke the door is not in too bad of
shape other than
that but it also uh veneer chipped off
the side the whole upper case here is
cracked here and there's other places
where it's loose where veneer is chipped
uh we have the missing pieces most of
the damage is in the Bonnet here where
you can see the whole case has been
cracked
open I'll start with the
Bonnet I'm going to start with this side
panel I believe this is the most damaged
area of the clock I guess I'm going to
see if I can get this panel we basically
kind of disassemble this or at least
partially disassemble
this I can see that the this panel it's
it's tenoned into this lower piece of
molding here and it's just nailed at the
top I'll see if I can get it loose
I don't think I'm going to be able to
get this piece of wood off of the side
panel where it's tenant tenons are
really deep I think I'll just try to
remove this whole piece of wood along
with the side
[Applause]
[Applause]
okay it's great got it out this
Tenon down here I suspect it was already
uh at least halfway broken that's a
little messed up I got to do something
about that but in the meantime I'll see
if I can get this molding off all
together and then want have to try
figure out exactly how we're going to
repair this um I can see immediately
I've got one problem right here here
where the part of the uh panel was
pushed out on top of the other panel and
I've got to pry it back into where it
belongs and I don't think there's any
way to do that without inflicting a
little bit of damage uh the question is
going to be how
much boy there just doesn't seem to be
any neat way to do it I think I should
use this knife because it's thin and
relatively strong I'm going to go in
there and just pry it back and pop it
back where it belongs
any damage that might occur I'll just
have to repair
afterwards man that these pieces of wood
just do not want to move and I actually
lost a little chip out of there I'm not
happy about that I think what I need to
do is cut away undercut this piece a
little bit and see if I can get it to go
down well so even though I've cut away
some of the wood that was blocking me
from putting it down where it belongs
it's still doesn't want to
go I think I'm going to just clamp it
down dry see if I can force it down I
don't know what's holding it
up Welly I think it's come down flat
here but man it's really really
resisting
it it does seem to be going back down
where it
belongs okay I'm setting up to clamp
this I cut a couple pieces of MDF
that's medium density fiber board I
covered them with wax
paper and I'll clamp this between my two
pieces it'll make it really flat there's
a couple of
issues even after I've clamped it flat
this way I've got to bring it together
this
way and this Edge I've got a clamp
against it's a it's sort of a wed shaped
piece I think I'm going to cut a board
kind of that shape that'll give me
something to clamp against when I bring
it together
[Music]
[Applause]
all right I've got one more problem to
address here before the glue up I've got
a big piece here that broke out of here
during the accident I thought it would
just go right back in where it belongs
but it doesn't want to uh once again you
know the way this thing broke kind of
like like an explosion like that and
then it doesn't want to go back down
where it belongs again what I'm going to
have to do is cut off a lot of the
Ragged pieces on either side of this
brake so this can fit back
in okay after a lot of back and forth
here I I think I've got to a point where
it can go down
so I guess it's time to try the glue up
now before I tighten these clamps up too
much I got to do my clamping this way
you know I didn't mention earlier but I
had uh placed my call on top here I had
put some pieces of tape in specific
places where I knew I needed to have a
lot of pressure with these larger size
clamps so there we go I just got to wait
take the clamps off maybe this afternoon
and see if I got it
Bo it certainly looks really good and
more importantly to it it seems really
flat uh so I'm going to take a a wet rag
clean all this glue off and uh decide
exactly what my next step will be if the
glue is uh being uh a little
stubborn you can always take a little
water and a uh gray pad go gently with
it that usually does
trip all right the uh next thing I'm
going to do is glue
this back piece on here
you know I usually uh wait till I get a
piece completely assembled before doing
any uh touchup work but I think because
those panels you hear so nice and flat
now with
nothing in the way I think I will go
ahead uh fill in these voids I need to
fill in and the cracks and and sand them
and then uh polish this out and get this
looking
uh almost 100% before I proceed to put
this case
together okay so now I'll uh sand the
family wood with 150
[Music]
okay everything's uh nicely leveled off
with uh with 150 so I'll switch to 220
and I'll just do the 220 by
hand all right I'm going over the uh
entire panel uh with little 220 and now
I'm going to brush on the
okay I'll uh let that dry for a couple
[Music]
hours now I've let this dry for uh three
hours
uh but I'm going to sand it and put
another coat on I want to get this area
it really uh absorbed a lot more into
the areas I sanded so I kind of want to
get it uh leveled off and smooth before
I do the
[Music]
touchups I realized there's something
else I need to do this panel it slipped
my mind this panel on the side of the
Bonnet here this lower rail is tenoned
into the front Rail and that Tenon
broke goes right
here and you can
see anything I before I do anything else
to the finish I'm going to cut this
Tenon it's great I got the original uh
Marks here uh from the original maker
when they marked out this Tenon so I'll
use those marks and I'll probably cut
about a half half inch deeper so I think
that these this big Tenon cut through
this Tenon but as I replace it uh I'm
going to probably cut into the big Tenon
I think it's got plenty of strength
there
f
[Music]
[Music]
all right that's the first mortise cut
I've just got to uh glue back those uh
chunks of wood that came out from the
Tenon from this piece and I've got three
more to cut but of course this one
shouldn't be nearly as bad this is this
is the old Tenon itself it should clean
right out of there here as opposed to
where I'm cutting a new Tenon you're
cutting a new mortise for the new
tenant this I just have to clean out the
old
tenant this is the uh inner panel that
surrounds the face of the clock
all right I've got a bunch of uh pieces
here the people really say did a good
job uh some of them are pretty obvious
where they go and some not so obvious
I've got to figure it out and start
gluing them back
so I've milled up some uh some wood here
to uh make tenons for all the mortises
I've just got to go over each one and
fit
them and um and I'm going to put them
all together to dry of course before I
glue it
up boy I'm fitting this uh all together
dry for the first time and I hadn't
noticed before that this top part is uh
cracked pretty badly too I got to bring
that back to where it
belongs okay I'm going to try to work
glue into all these areas and just clamp
it back again it it doesn't move now I
can't even really try it out I'm going
to try injecting some glue down in here
too with this little
syringe might help me uh get it down in
there this little uh syringe thing puts
the glue right where you want it off
going to have to use that more often
so now we can turn our attention to the
the main case here uh it does have some
problems not nearly as many as the
bondet but door it's uh got some issues
here I'm going to start by uh removing
the door
as you can see one of the problems with
these clock cases is that a lot of times
there's not any joinery going on there's
some as we saw with the mortise anded
joints in the crown piece but these are
just blocks of wood all just kind of
glued
together it can be Pro
problematic trying to get them back
where they
belong so I've scraped off the glue off
all these pieces and uh got my knife
down in here as best I could there's no
real way to even clamp this together I
think I can just work glue into
everywhere and and just uh put these
back where they go and uh maybe tape
this to get a little pressure this
way I'll give it a try
so as I'm as I'm dry fitting this
together in other words uh without glue
you know I'm discovering lots of uh
small repairs well some not so small
like I discovered you know that I needed
to glue this whole section which came
out fine but there's still some loose
molding I've got to glue U I just
realized there's a big uh piece of uh
veneer missing right here from this
corner
probably find a couple other things
before I'm done but I'm going to get
those repaired and get really close to
the glue
up okay I think I'm ready to glue this
up uh you have to realize that off
camera I've put this together and taken
it apart about four times you know each
time it was very difficult and figuring
out little things that were wrong and
fixing them and clamping it so now I'm
ready to do it there's not really that
much glue really just in this joint down
here here the top gets nailed on but
I'll do that afterwards I'll still clamp
it into place to make sure I've got
everything aligned
so I really want to make sure that these
miters are
together you know
perfectly okay that's good for
now and
tomorrow I'll nail this upper piece on
these uh Corners came together really
well and so now I need to uh renail this
top section to the
sides you know when working on antiques
I always try hard to uh be aware of the
techniques and the uh level of
craftsmanship that went into the
original building I try to mimic that
when doing my repairs it also kind of
gives you a connection to the uh people
that built this clock so uh in that
Spirit now I've got to uh pound these
huge
Nails into this nice antique clock from
the
inside cuz that's how they attach the
side this this top piece to the side
panels
okay now back to the uh the the main
case here
for
this is a good example of a common
problem uh there's inlay in the face of
this clock the grain of the inlay runs
perp pendicular to the grain of the
panel which runs this way the panel
Shrunk The inlay comes up I've got a cut
a little piece out of it and glue it
back down
so now I think I've got everything glued
down that's got to get glued down I'll
probably find something else along the
way but now I'm going to take each side
of the cabinet I'm going to uh gently
clean it with a little bit of a
commercial cleaner I want to get off uh
mostly my glue and um and anything else
that's on here
all right now I can uh start work on the
door the main thing with the door is the
is the broken glass
it's
[Music]
okay the second attempt at cutting the
glass worked fine it fits really well
into the frame so I'll install it with
glazing putty
all right I think I'm finished all the
repairs and as you saw before I've
already started the cleaning process and
so now I'll show you exactly what I'm
doing I'm going to use the door as an
example which I'm just going to gently
clean it uh with my commercial cleaner
here and I'm going to wax it and I have
a a nice wax here and it's a dark brown
wax I don't think it's going to really
change the color of the piece but the
dark wax when it gets in all the little
defects and everything will will be
dark so uh I'll show you what I'm going
to
do and then once I feel I have the uh
wax down really well I this is a rag
that I keep just for buffing
wax this door looks good I'll let this
wax uh dry maybe tomorrow I'll buff it
again or something so now I'll move on
uh to the case I've already cleaned most
of the case I just need to get to the
waxing part of
it now this section I cleaned but it
also had some spots on it maybe water
hited or something so I'm going to use
uh a little bit of a 40 steel wool and
the
wax just gently
so I said I when I had this when I
repaired this panel I said I was going
to finish this touchup before I
assembled it and I ended up not doing it
so I've got to deal with it now the
first thing I'm going to do is just sand
it I put two I put two coats of shellac
on I'm going to sand it with
500 then I'm going to uh color
that and then I'll uh give seal it in
with a a spray shellac
aerosol okay I've let the shellac dry
and um the St doesn't look bad at all
luckily areas of it are just just a
little lighter that's a dark spot I'm
going to touch it up uh these little
light spots with a marker a real fine
tip marker and then uh seal it once
again with the shellac
a
so here we go this uh beautiful antique
tall case clock if you remember what
happened was it fell forward and uh
suffered a lot of damage especially to
this side of the Bonnet was completely
smashed up uh the glass was broken and
there was numerous uh problems and
repairs with the moldings inside of it
there was just a lot of minor repairs
but uh thank goodness everything worked
out and I I think it looks pretty good
