Antique Sword Restoration and Maintenance: Disassembling a German IOD 98 Infantry Officer Degen

Ancient Edge
3 followers
13 Video Views·Dec 24, 2024
Maintenance or restoration of some German m.1889 IOD degen is easier than you may think. The whole assembly is kept together by a finely machined threaded pommel cap.
Hello everyone and welcome to another video. Today we tackle another sword disassembly and
specifically this German IOD 89. This is a sword we talked about a few videos ago
and while going through its details, its features, its marks and its history I mentioned that the
peened tang was likely hidden by this end cap and I was actually wrong. The reason I said that
was that even at a pretty close look this whole section, so this partial backstrap and the pommel
area seem to be all one solid piece of brass but that is not the case. Luckily I received a couple
of messages from some of you who mentioned that in some cases German IOD swords actually have a
threaded tang and by unscrewing the end cap here the whole sword can be easily taken apart and much
to my surprise when I actually went to try and see if this was indeed threaded on it was. So
this is a sword that can be taken apart, easily is to be seen as we'll talk about in just a moment.
I'm not saying it's the case for all of them but for this one specifically it wasn't the
easiest thing in the world but it can be taken apart and reassembled pretty quickly. So without
further talking we'll do exactly that. Okay so let's start with the disassembly. The first thing
I wanted to show you is how precisely the end cap here fits on the rest of the pommel. So I'm sure
now that you know it's threaded you can probably see but you can I hope also understand how without
knowing that at a first impression this looks like one solid piece. Moreover I want to show you how
easily this unscrews. So there we go and I don't know if you can hear that but it's so so smooth.
So once you thread this off there's quite a few threads to it because you can even see some traces
of gilding left and the precise threads in there. Make sure you don't drop this cap because this
comes off really easily. So there we can see the cap also with traces of gilding still on the inside.
Now the first obstacle is removing the grip or at least was for me. In my case everything this whole
hilt assembly was so tightly connected that it was really impossible to even have any play in it.
So I tried moving the blade I tried wobbling it around hoping to dislodge it but it did not work.
What in the end I had to do was use a leather a thick leather piece of leather and a metal punch
so a piece of metal like this and I hammered on it making sure that I was not giving extremely
heavy blows and that eventually dislodged the tang from the grip but still it took
quite some time. So if you're trying it and you're having this difficulty
just keep going it'll slowly slowly dislodge one millimeter at a time maybe even less
but eventually it will come apart. But do make sure you use something to soften the blow so a piece
of thick leather or something similar. Now hopefully the grip will come apart easily.
It does require some work so even once you get it back in place like even once you've removed it
once it still proves to be quite hard to remove. So actually I'll hit it again a couple of times
so you see what I'm doing. Okay so I'll try to do this in a way that's safe for me and for the sword.
Let's see if we can get it on video too. That would be ideal. So the first thing is put this
little leather um spacer it's just basically a buffer to make sure that the tang doesn't get
damaged by any hammer blows. And I should probably add the hammer blows should not be too strong.
You just need to be delicate with this. The second thing I use is this punch. This is used for rivets
or for snap buttons for example but it's very convenient because it has a concave tip here so
it fits very well on the tang without slipping away. And once those are in place the difficult
part to do on video I think is going to be whack it a couple of times with a hammer.
So what you hopefully want to see here is that as you hit it delicately the tang should slowly
move down into the grip and this won't unlock in one blow. So it's not going to be like one hit
free but it's slowly going to move down one millimeter at a time maybe even less.
So make sure you see that the tang is actually moving down through the grip.
I won't show this on video because I cannot keep the blade still while filming and make sure I
don't also damage the blade or my hand. So I'll see you in just one second once I've removed the grip.
Okay so as you can see here the tang has moved down a few millimeters almost maybe a centimeter
down the grip and at this point it's loose enough that we can actually remove it. Okay so the grip
finally came off. It took about 10-15 light blows with the hammer and it does lodge in place very
well even after it's been reassembled. So this isn't a sword that's going to stay loose once
you take it apart at least as far as I can tell. We can see its wooden core and one thing you really
want to be careful when taking it apart is that since you're probably going to be gripping it from
the grip or if you do just make sure you're very careful with the thread because these are delicate
and they can break. So I think it's very interesting to see here the way the metal
thread is kept in place. So you can see these wooden chip shims that kept it in place for over
100 years so the method definitely works. We can also see that the chagrin here is very well glued
to the wood so there's no looseness to it. There's no risk that this is going to come apart.
Let's look at the rest of the sword now. Okay so we have this nice hilt assembly and the first
thing you want to do is remove the leather ring. This depending on what condition your leather is
can be a rather delicate step because it can be super dry or damaged but in this case it's
solid enough that I'm not excessively concerned. So if we remove the ring let's take a look at that.
What we have is a could be even a cardboard core here so you can see that it's not a full
one piece of leather. There's a core a light core in the center and then you have two
edges of leather that are stitched onto it. This room here this cutout is for the
well we'll check it in a second but it's for the retainer of the there's a spring that holds the
folding shell guard in place so that cutout makes room for it and yeah this may need some
reconditioning to be back to supple soft leather. And then we have our hilt structure so as you can
see the hilt and knuckle guard are one piece well except for the folding shell guard here.
Here we have a spring that holds basically the ensures that this
stays in place and you can see it popping out there on the side. This kind of is a bit of
an obstacle to removing the hilt because as you can see it kind of bubbles here and makes a little
bit of an obstacle but if you pull it enough or push this spring down it will eventually come
away. So I won't film that because it's uh it's tough to do while filming but I'll see you again
in a second once it's removed. And here we go the whole assembly is removed let's first take a look
at the um hilt but there's nothing really unusual here that we hadn't already seen in the previous
video and we can take a look at the blade too. In many cases I was told you might find numbers
or marks on the tang or underneath let's say the area that normally is hidden from the eye
but it does not seem to be the case here. Here you see the spring again it's rather strong
we can see some coarse file marks there is a bit of rust so I'm going to clean this up before we
reassemble it but no numbers marks or anything that I can see. So unfortunately even after
removing the rust and cleaning it no inscriptions no dates no numbers popped up on this blade so
it's just an unmarked blade. A bit disappointing for me and for maybe those of you who are hoping
to see some secret under the the grip but that is not the case for this sword. There we go it's
fairly straightforward to put back in place as you see again you just need to get over the the hump
here of the of the spring. Okay we then grab the leather ring making sure we put it up on the
correct side and once this is removed it's fairly straightforward to put back.
We then grab the grip assembly so together with the don't forget the brass ring
push this in place and this part here is where you're going to need to really push this with
some strength you want it to really move back in place you don't want it to be loose or anything
so there's still a few millimeters I think that we can and also you can see from the ring here so
now this is not the easiest thing with oily hands but it moved back in place I felt it move you can
see that the tang thread is now almost at the edge of the grip so we're quite good.
The ring is also solid so we can put the end part here of the pommel in place make sure that the
it's connected to the knuckle ball here everything is tightly and firmly in place
and then last but not least we screw the end cap on so I just want to show you again how smoothly
this goes in place and not just that but I think the thing that most surprised me
is how precisely when you reach the end of the thread so the end of its run the
yeah you see the cap aligns perfectly with the pommel there's no extra movement here this is
its end of the run for the thread and it's perfectly aligned to the pommel this is really
great machining so there we go so the iod89 proves to be a fairly straightforward sword
to take apart and to reassemble once you get through that possible obstacle of loosening all
of the elements that are so tightly bound together and this tight connection is a testament I think
to German manufacturing at the time it almost feels in certain cases especially with how smooth
the thread of the cap here and how it blends perfectly with the rest of the pommel to make
it seem like one solid piece it almost seems like precision machining and it's really
quite surprising that they put so much care and effort and precision into making these swords
