How Delta Fixes $32 Million Jet Engines | Big Business

Aviation Technology
2 followers
Dec 20, 2024 #Aviation
If a plane gets sick, it might end up here,
at Delta Technical Operations in Atlanta.
At nearly 3 million square feet,
it's the biggest aircraft repair shop in North America.
Here, mechanics, technicians, and engineers
fix nearly 1,000 planes a year with all kinds of issues,
from a loose screw to an engine failure.
But it takes a lot more than elbow grease
to get a plane back in the air.
This is a bustling and expensive 24-hour operation.
The work never stops because the planes never stop.
That's Cedric.
Back in February, before COVID-19 was declared a pandemic,
he took us behind the scenes
of Delta's massive airplane hospital.
Let me put my bomb cap on.
I look like somebody.
Delta Tech Ops is a maintenance repair and overhaul,
or MRO, business.
We do everything that you see on that aircraft.
We have component maintenance,
engine maintenance, and aircraft maintenance.
6,000 technicians can fix every inch
of pretty much any commercial jet on the planet,
from 150 other airlines, government organizations,
and even military branches.
Our job is basically just to maintain the aircraft,
keep them safe.
An aircraft ends up here if it's scheduled for maintenance
or if something is wrong.
And one of the biggest issues the team deals with
is engine repairs.
When that happens, there's $32 million on the line.
First, a plane is grounded
and then tugged into this giant hangar.
We can have six wide bodies
and six narrow bodies in simultaneously.
So that's a lot of work that can be done in here
at the same time.
Technicians run a diagnosis for an engine problem.
If they determine it needs fixing,
it heads to the engine shop.
This division of Tech Ops started in 1961,
at the beginning of the jet age.
Today, engine repair is the most expensive section
of Tech Ops, with $100 million in new facilities,
just in the last two years.
So the engines come into our shop
and we take the engines apart completely.
We inspect the parts
and anything that we find wrong with them,
we are able to repair those things
before putting them back into the engine.
These are very high-value parts,
so repairing them is the most economical way
to keep our engines flying.
Before parts can be fixed up, they get a chemical bath.
So most of the engine parts are cleaned in this area.
If there's any contaminants on the blades
or any of the parts of the aircraft,
you wanna make sure that's removed
so you can get maximum performance of the engine
because of the airflow.
Yeah, I used to work back here many years ago.
I started back here.
Next, the engine heads to one of seven bays
in the engine shop.
What's going on?
How you doing?
Why's everybody got a smile on their face?
That's what I wanna know.
Y'all ain't like y'all happy.
How you doing?
Here, FAA-licensed technicians
work on and reassemble the engine.
We have approximately 900 engines a year
come through for various levels of maintenance.
Those cover 14 different kinds of engines.
Wanted to show everybody a BR715 engine.
So this engine in particular is undergoing light maintenance
where it doesn't get fully disassembled.
Light maintenance takes anywhere from 15 to 35 days.
Heavy maintenance, on the other hand.
That's where we'd fully disassemble the engine,
go into the internal areas of the engine
and basically refurbish the entire components
associated with the engine.
That can take over two months.
2,000 piece parts that have to be
individually inspected and maintained.
This engine is flying approximately five times a day.
An engine remains on wing from anywhere from a few years
to some of our engine types,
as many as seven, eight, or nine years.
So we wanna take the opportunity while they're here
to do everything that we can
to ensure that they're reliable for the fleet.
If an engine can stay in the air longer,
it saves Delta and its customers money.
Remember, these things are expensive
and so are all the parts that go into them.
This part costs $12,000.
And there's 80 of them.
Add in the price of the surrounding parts and...
We're looking at about $2.2 million sitting on the table.
This is the highest technology portion of the engine.
These blades operate at very high temperatures
and very high stresses.
These fan blades?
Out of the latest generation Rolls-Royce Trent engines.
Are made of precious metals and alloys
and cost hundreds of thousands of dollars each.
So a modern jet engine is worth several million dollars.
The maintenance of those is very, very important
to maintaining the value of that asset.
Only about 20% of all the engines fixed here are Deltas.
The rest are for customers.
That's probably UPS right there.
We have Azure, Gold, Brazil, and Virgin Australia engines.
Repairing all these flying beasts
takes a lot of skill and caution.
Anything can kill you that we touch.
Everything is stronger than us.
Everything is heavier than us.
You have to have your head in the game.
You're looking at a 13,000-pound engine.
Lifting something that heavy,
it requires a lot of safety, coordination,
teamwork, and attention to detail.
But an engine that runs smoothly is just as important.
There's no pulling over on the side of the road
if there's a problem.
They're 40,000 feet in the air, so nothing can go wrong.
But it's an example of the precision
and the very close tolerances
that everything has to be built to
because of how fast it all spins and how hot it all gets.
We want you to get to your destination safely,
and that's what this is all about.
To keep track of the thousands of repairs and checks,
technicians record every step of the disassembly,
assembly, and inspection process on work cards.
They also rely on fancy gear,
from the laser welding equipment to the turbine grinder.
That precision is necessary
to ensure the efficiency of the engine
when we return it to service.
All this new equipment also means Delta can repair
some of the most technologically advanced
commercial engines in the world.
That happens out in the newer facility, opened in 2018.
Once technicians have restored all the parts,
they converge back into one of the engine bays.
Here, they flip the engine vertically
and start reassembling it.
The core engine is complete at this point,
and they're putting on all of those accessories
and harnesses and piping on the outside of the engine.
But before an engine can go back on a wing,
there's one more step.
That happens at the world's largest engine test cell,
a short drive, or a bike ride, from the engine shops.
You don't want to encounter problems
while you're installing an engine on wings,
so it comes to us,
and we make sure everything's passed off and clear.
This part of the building is where the engines come in.
We install and rig the engine.
So basically, we put the test equipment on the engine
and get it ready for it to run.
And then this part of the engine
is your actual test chambers.
The test chamber is the newest addition to Tech Ops,
and where the engines are test run,
it can handle 150,000 pounds of thrust,
even though no engine actually has that kind of power.
Engineers run tests 24-7,
monitoring engine performance from the control room.
The reason we do 24-7
is because of the production coming out of the shops.
So I can have three engines prepped and ready,
but I got one test chamber.
So, you know, we want to keep that test chamber running
and keep it moving.
So you want to get it in there, get it run,
and get it back out so we can move our next engine in.
Once Ken's team signs off on the new engine,
it's carted back to the hangar, secured on the wing,
and tugged out for takeoff.
As you see, there's a lot of things going on
behind the scenes at the maintenance program.
We're always constantly trying to work
to make sure we're safe, effective,
and efficient in what we do.
That means once we get an aircraft in here,
we're trying to make sure that we take care of everything
that we need to take care of while it's down
so it can get out and fly.
And when it comes back, we'll do it all over again.
Hey guys, my name's Abby.
I'm the producer on this video.
Since we visited Tech Ops back in February,
obviously things have changed a lot.
And Tech Ops has been operating this whole time,
but things look a little different.
Mandatory temperature checks, PPE,
and social distancing on the floor.
But I know a lot of big businesses
are changing with the times.
So let me know what you want to see
in the next episode of Big Business,
and make sure to hit the subscribe button
so you don't miss out.
