Types of Japanese Teapots | A Guide to Kyusu, Houhin, and Shiboridashi

TEA & Stories
20 followers
5 Video Views·Dec 19, 2024
A look at the main three types of Japanese teapots: kyusu, houhin, and shiboridashi, along with their primary differences and uses.
00:00 - Introduction
00:50 - The three types of teapots
01:34 - Houhin vs Shiboridashi
02:57 - Kyusu overview
05:05 - Shapes of kyusu
06:53 - Styles of kyusu
09:42 - 4 common ceramic filter types in kyusu
12:44 - Pouring with a kyusu
13:54 - Houhin overview
15:32 - Shiboridashi overview
18:12 - Final notes
Hello and welcome back to the Tezumi YouTube channel.
I'm David and today we'll be taking a look at the three most popular types of Japanese
teapots.
Kyusu, Hohin and Shiboridashi.
We'll look at the similarities and differences between each style and help you decide which
one is best for your tea brewing needs.
Before we begin we need to clear up some terminology issues.
In the western world the word Kyusu refers to these side-handle teapots, whereas in Japanese
Kyusu, spelled Kyusu, can be used to refer to all of these, as the kanji themselves really
Properly speaking in Japanese, the correct term for a side-handle teapot is Yokote Kyusu.
Yokote, Yokote, meaning side-handle.
This is in contrast to Ushiro de Kyusu, spelled Ushiro de, where the handle is attached to
the back of the body.
But for here on out I will refer to the side-handle teapots simply as Kyusu, for brevity's sake.
Firstly we'll take a look at the differences between a Kyusu, a Hohin and a Shiboridashi.
Obviously the first thing you'll notice is that a Kyusu has a handle.
This means it is useful for all temperatures of water, you can use boiling water or cooler
water as the handle means you can pick it up without burning your fingers.
This makes a Kyusu a really great all-round style of teapot.
Conversely, Hohin and Shiboridashi don't have handles, which means that you must pick the
teapots up by the body when using them to brew tea.
The downside of this is that if you're using really hot water, you can burn your fingers
really easily, which is why these two types of teapots are used exclusively or almost
exclusively to brew Japanese green teas at lower temperatures.
Ignoring the Kyusu for a second, we'll take a closer look at the Hohin and Shiboridashi.
These two styles are often conflated and that's because they are in fact very similar and
there are many teapots that exist somewhere in between these two extremes.
One key difference between the Hohin and Shiboridashi is that the spout of a Shiboridashi is made
from the same piece of clay as the body.
The potter simply uses their thumb and fingers to shape a simple spout.
In contrast, the spout of a Hohin is made of a separate piece of clay which is molded
into the shape of a spout and then attached to the main body of the teapot.
Another key difference is that the Shiboridashi does not have a filter at the spout where
the Hohin does.
Another difference between these two teapots in particular is that this Hohin has a lid rest.
There is a lip of clay around the top of the teapot which the lid rests on.
Conversely, the Shiboridashi does not have a lid rest, meaning the lid is free to slide
around which is very useful when it comes to using them as we'll explore later.
This is not a key difference as many Shiboridashi also have a lid rest.
In fact, the space between these two styles of teapot often gets blurred.
There are many teapots that qualify both as Shiboridashi and as Hohin and some people
see Shiboridashi as simply an evolved or more specific style of Hohin.
Now that we've gone over the differences between each style of teapot, we can take
a closer look at each type, starting with the Kyusu.
If you're just getting into tea or starting with Japanese tea in particular, then we highly
recommend using a Kyusu as your first teapot.
These are very versatile pieces and they can be used to brew all types of tea from Gyokuro
to Sencha to Genmaicha or even Chinese and Taiwanese teas.
The presence of a handle means you can hold the teapot full of hot water and even boiling
water without burning your hand unlike with a Hohin or a Shiboridashi.
The presence of a built-in filter means you can brew teas that have really fine broken
leaves like a Fukumushi Sencha without getting a lot of that leaf matter in your cup.
As I mentioned earlier, in Japanese the word Kyusu means quick pour.
This is likely referring to the way that the side handle, located roughly 90 degrees from
the spout, makes it really easy and elegant to pour tea just by rotating your wrist.
This is in contrast to top handle or rear handle teapots which require a sort of whole
arm action to pour them.
Kyusu is made out of five pieces of clay.
We have the body, the lid, the spout and the filter.
Each of these pieces are made separately so the lid, body, handle and spout are thrown
on a pottery wheel and the filter is usually made from a flat sheet of clay with holes
punched into it.
The craftsman, in this case Gyokuro, will then take all five pieces and attach them
together using slip to join each piece to the body.
This is a really delicate process which is why these handcrafted Kyusu are so wonderful
to use and to behold.
To use a Kyusu, simply take the lid off, add leaves, add hot water, put the lid back on,
steep and pour using a slow and gentle turn of the wrist until all the water is out.
For a more detailed video on how to brew tea in a Kyusu, you can check out our Sencha
brewing video over here.
Kyusu come in a variety of shapes and styles.
These three shapes are some of the most common that you'll come across.
This one called Marugata or round shape is probably the most versatile and easy to use.
It's a really good all-round shape as it suits teas that expand horizontally like Senchas
as well as teas that expand more vertically like Oolongs and black teas.
Over here we have a flatter style of teapot.
This is often called Hiragata meaning flat shaped and this style is geared mostly for
brewing high-end Japanese green teas such as Senchas, Kabusecha and Gyokuro.
The greater surface area afforded by the flat shape also allows the hot water to cool more
quickly which is useful when brewing at lower temperatures.
This style of Hiragata Kyusu with the angular corners is actually quite hard to make as
these sharp corners tend to crack in the kiln if they're not made properly which is why
these are often a display of a potter's skill.
In between the Marugata and the Hiragata we have something of a hybrid often called the
Hiramarugata or flat round shape.
This style basically combines the general use shape of the Marugata with the slightly
more specialized shape of the Hiragata.
You still have a more wide opening and flatter shape but it's not quite as extreme as with
the Hiragata.
Here we have two more shapes of Kyusu.
This one's slightly taller but still quite rounded.
You might call this Nasugata or eggplant shaped.
There really is very little difference in usability though between this and a more fully
Marugata Kyusu.
This larger Hagiaki Kyusu has a shape and style that is more reminiscent of a Hohin
and it combines these properties with the ease of use of a Kyusu handle.
Now I'll take a look at a few of the decorative styles that you'll commonly see on Kyusu.
These four Kyusu are Tokoname-yaki.
Tokoname is a city in Aichi prefecture in Japan that is well known for its unglazed
Kyusu which were originally mimicking Chinese Yixing teaware which have since evolved into
their own distinct and unique style.
The most classic style of Tokoname-yaki Kyusu is that using this type of clay called Shude
or vermilion clay which is a fine-grained brick red clay that is fired in oxidation
to produce this brilliant vermilion red orange colour.
It's known for having very slight muting properties on tea which will take away some
of the harshness and astringency but these properties are very very slight compared to
lots of Chinese clays like Yixing or Nishing.
This teapot has a decorative style called Matsuhada or pine bark in which this surface
texture is put into the clay through the use of a small wheel during the throwing process.
When the same Shude clay is placed in a reducing atmosphere in a kiln where it has less access
to oxygen it can actually come out black as it gets covered in soot and there are chemical
reactions between the clay and the reducing atmosphere which turn the clay black.
Here we have another unglazed Tokoname-yaki Kyusu this time thrown from a green clay
called Ryokude in Japanese.
This is clay that has been dyed green usually with the use of cobalt and the shades it produce
can range anywhere from a very muted green to a more vibrant green.
This teapot is decorated using a technique that is unique to Tokoname called Mogake in
which Amomo seaweed is draped across the teapot before it is fired and when the teapot is
fired in the kiln the seaweed will burn away leaving behind these squiggly lines as their
carbonized silhouettes.
Here is another Tokoname-yaki Kyusu this time decorated in a more modern style not with
a glaze rather but with a slip coating with some pearlescent polka dots painted onto it.
And lastly I have a Hagi-yaki Kyusu here today.
Hagi is a famous pottery town located in Yamaguchi prefecture and you might notice one major
difference between this Kyusu and the rest here today and that is that this one is glazed
on the outside but on the inside it is unglazed still.
As I mentioned earlier Japanese clays tend to be less porous and less flavor absorbing
and flavor changing than the Yixing and Nixing and other clays from China which means that
even unglazed teaware like these can be used for a variety of types of tea.
I would probably shy away from brewing incredibly strongly flavored teas such as like herbal
blends or scented teas as this may actually stay in the clay and I would definitely avoid
using soap to wash unglazed teaware as that can definitely linger in the clay.
The last point I want to make today about Kyusu are the four different types of filters
you'll commonly find in Kyusu these days.
The most simple is the doake style where holes are punched directly into the wall of the
body of the Kyusu which means unlike the other Kyusu which I said have five pieces of clay
this one is made out of four pieces of clay the body the spout the handle and the lid
as there is no separate filter piece.
This is the oldest and simplest style of clay filter you'll find in most Japanese
teaware and it's very good at straining more traditional styles of tea with larger
intact leaves such as Futsumushi Sencha or Asamushi Sencha these really intact long needles
of tea but it won't do as well with Fukumushi Sencha or Deep Steam Sencha as the broken
leaves and fine particulate that is common and definitive of the style of tea will pass
through the relatively large holes of this filter and end up in your cup.
The smaller surface area of the style of filter also means that it's more likely to
clog so when you're pouring can make sure that it is nice and slow that being said this
style is very easy to clean and very easy to take care of and that's why it's still
popular to this day.
The second type of filter we'll talk about today is often called Debeso or sometimes
Poko it is a half spherical piece of clay with holes in it that is placed over the opening
of the spout.
The upside of this style is that the smaller holes do a better job at straining finer leaved
teas and the rounded shape gives the strainer more surface area which means it will pour
quicker and is less likely to clog.
One downside though is that the very rounded shape of the style makes it a little hard
to clean but they are still very effective and very useful.
This style of filter used to be the de facto style in all Tokoname Kyusu up until the 60s
and 70s when Fukumushi Sencha became incredibly popular and potters started putting metal
mesh filters into their Kyusu.
These are very fine meshes made of stainless steel which do a very good job of filtering
out the very fine particles of Fukumushi Sencha.
The downside to steel filters in teapots is of course that they can leave a slightly metallic
taste to the tea and also if you don't clean them properly they can rust so we prefer to
use ceramic filters.
In response to the proliferation of the stainless steel mesh filters potters in Tokoname started
replicating them using clay.
This style often called Sasame has a wider shape than the half spherical Debeso filters
and the holes are generally smaller meaning they are better suited for straining Fukumushi
Sencha.
Another variation of this style is called Ceramesh meaning ceramic mesh in Japanese
and the major difference between Ceramesh and Sasame is that the filter is flat against
the wall of the teapot often concave in shape in contrast to the convex shape of Sasame.
These two terms Ceramesh and Sasame are often used interchangeably but in any case they
are the most popular styles you'll find on most high-end pots from Tokoname today.
When pouring with a Kyusu there are a few things to keep in mind.
Firstly when you hold the teapot make sure you don't cover this hole at the top of the
lid.
This hole allows air in so that it can replace the liquid that is leaving and if you cover
it when pouring it can actually stop the pouring from happening especially with the really
well-made Kyusu that have an airtight seal with the lid.
I usually recommend putting your thumb on the lid this keeps it in place.
Alternatively you can use your pointer finger like this though I find that much less comfortable
or you can use a second hand like so.
With most Kyusu it's quite easy but you want to make sure that you don't have your
fingers touching the body of the Kyusu as this can get quite hot especially if you're
brewing at higher temperatures.
You want to actually use the handle as a handle so keep your fingers away from the body so
you don't burn them and pour nice and easily.
With all Kyusu and especially with flatter Kyusu like these it's recommended that you
pour slowly as if you pour too fast all the tea leaves can rush towards the front of the
teapot clog up the filter and cause the tea to spill out from the gap between the lid
and the body.
So you want to pour nice and slowly.
Moving on let's take a look at our second type of Japanese teapot the Houhin or sometimes
called Houbin.
The Japanese characters mean treasure vessel Houhin as these teapots are often used to
brew highly refined and elegant types of tea such as high-grade Senchas, Kabu Seicha and
Gyokuro.
Most Houhin have a shape very similar to this one here with a wide opening which can be
used to let the tea leaves cool as they brew and an open style spout rather than the closed
style you find on many Kyusu although there are of course exceptions to this especially
in Tokoname Houhin.
There isn't much of a performance difference between the open and closed style this is
really just a stylistic difference between different pottery regions.
That being said most Houhin are actually made outside of Tokoname for example this Houhin
is from Asahiyaki which is a pottery studio in Uji.
Another feature that is common to most Houhin is the Doake or direct styler filter as I
mentioned earlier this style performs very well with traditional teas with full intact
leaves such as high-grade Senchas and Gyokuro which is what these types of teapots excel
at brewing.
Because Houhin obviously don't have handles you have to take a little bit of extra care
when brewing with them.
Usually you'll be brewing teas like Sencha and Gyokuro which means you won't be using
hot boiling water that way you can actually hold the teapot quite comfortably.
That being said if you are going to be using hotter water make sure you don't fill it
all the way up as you do need this top area to be cold enough to touch so you can handle
it.
One last note regarding Houhin is that they're often smaller in size than Kyusu as these
higher grades of tea are often traditionally enjoyed in smaller sizes and in smaller cups.
Last but not least we have the Shiboridashi.
Technically speaking the correct term for this type of teapot is Shiboridashi Kyusu
but most people especially in the English speaking world say Shiboridashi for short
or Shibo for even shorter.
Shiboridashi is a Japanese word meaning to squeeze out.
Shiboru means to squeeze.
Dashi means to come out or get out.
So together Shiboridashi means to squeeze out.
This is likely in reference to the way that you hold it either like this which is sort
of a squeezing motion with your hands or to the way that you can use the lid to sort of
squeeze the last drops of tea out of the teapot.
Even more so than Houhin this type of teapot is a Gyokuro specialist.
The shape is even wider and flatter and the size is even smaller just to extract the incredibly
concentrated drops of umami that Gyokuro is known for.
Shiboridashi are very simple pieces of teaware usually consisting of only two pieces of clay
the lid and the body.
There are never any filters on Shiboridashi.
It's actually one of the hallmarks of the style though sometimes there will be grooves
cut into the spout to help trap the leaves from pouring out.
Instead to separate the leaves from the water you simply put the lid on the Shiboridashi
at a bit of an angle creating a very narrow gap between the lid and the body and this
allows you to get the liquid tea out without getting any of the leaves out.
In this way the Shiboridashi is very similar in use and construction to the Chinese Gaiwan
in that you set an angle with the lid and simply use that angle and gap to filter the
leaves from the water.
The main difference being of course that Shiboridashi have a spout and they are very very flat.
Because of their extreme flatness and small size Shiboridashi aren't particularly useful
for brewing other types of tea but excel at brewing Gyokuro and other high-grade Japanese
green teas.
Like all Tokonameyaki teapots Shiboridashi come in a wide variety of styles and decorations
and today I have two pieces.
This one is by Gyoko made in a plain Kokudei style.
Kokudei as I mentioned earlier is the same clay as the bright red clay from Tokoname
but fired in reduction producing a deep black.
This Shiboridashi was made out of a fine grey clay by Tanikawa Jin and is decorated using
the Hidasuki technique.
This is very similar to the Mogake technique from earlier but instead of seaweed they use
rice straw and this rice straw is wrapped around the teapot and is placed in the kiln
where it burns away leaving behind these red streaks.
So there you have it a quick look at the three main types of Japanese teapots.
If you have any questions or ideas for future videos let me know in the comments.
As always I'll leave a link to the teaware used in the video in the description down
below.
If you enjoyed this video please give it a like and subscribe and thank you for watching.
Have a nice day.
