Something I've learned since starting historical costuming is that accessories really pull a look together. I'm slowly trying to improve myself on this, adding hats, gloves, belts, and hopefully one day jewellery. Hats, however, can be really intimidating. Or so I thought at first. Turns out, it's not necessarily too hard to pull together a hat that can pass as nice! And they sure are fun to trim. This is only the second hat I've ever made from scratch but I think it turned out well. The pattern for it is on Patreon, if you're interested!
Here are the materials I used: velvet fabric, batting, heavyweight interfacing, some fabric from the matching ensemble, some tarlatan for last minute stiffness, plastic wire, glue gun, and a variety of feathers. Hats don't take a lot of fabric either! Anyway, I hope this was easy-ish to follow, but let me know down below if you have any questions. I think in the future I can start being a bit bolder with trimmings to be more like the originals.
Hello everyone and welcome to a new video. Well, a new old video. I actually made this hat last
year but it took me this long to get worn photos so here we go. Here's some of my inspirations.
I'm roughly setting this in the 1890s but I don't know much about hats so... Here is my pattern.
It is composed of a narrow curved brim and a tall-ish band and a small crown. Bear with me,
I don't know any millinute terms. For the pattern I just drew out the shapes roughly on paper and
then taped them together into a mock-up. I just cut away and added where needed until it looked
like it could work. I'm actually going to scan this pattern and put it up on my Patreon so check
out the link in the description box if you're interested. Here are some of my materials. Black
velvet fabric, some matching black striped suiting from the matching ensemble, feathers and some
wire. I will also use some batting and heavy interfacing, not pictured here. My first step
is to cut all of my three pieces out of the heavyweight interfacing. I don't add any seam
allowance to these as they are the bases. I cut two layers of each pattern piece.
I then roughly baste the two layers of interfacing together for each pattern piece with large
stitches. Next step is to attach the wire to the edges to help them keep their shape.
Usually you would use millinery wire but I didn't have any so instead I'm using this plastic wire.
Not great. These clips are great for hat making. Once it's in position I overlap the ends and tape
them together. Then I take this over to the sewing machine and sew over the wire with a wide
but close together zigzag stitch. The same is done to the brim. I also made sure that I used the
backstitch function of my machine quite a few times over the sharp edges to really encase them
and make sure that those rough cut edges wouldn't come loose. I wasn't too happy with the stiffness
of the brim so I added some of my scraps of tallatan on top. This really helped. I zigzagged
over the edges and across the pieced bits of the tarlatan. To add some extra stiffness I added extra
rows of zigzag stitches around the brim. Kind of like pad stitching but machine. I also reinforced
the band in the same way but without wire. Here are my prepared pieces. I then added some batting
to the crown. I basted it into place then used this to cut out the shape from the black velvet
with some seam allowance. This is pulled over the edges, pinned and hand sewn into place. I needed
to make sure that this was quite taut. I only used large running stitches because once I put in the
lining it will better secure them down. The same is done to the band. For the lining I used the
same lightweight black silk I used to do the lining in the corresponding jacket of this project.
I only had scraps so I had to piece them together. You know, the old saying,
piecing is period. It is all neatly pinned into place and hand sewn with a whip stitch.
Then I overlap the edges of the band, only slightly, and sew them down from both the
wrong and right side with a whip stitch. I align the band with the crown and roughly pin it into
place. Then using two strands of thread, or strong thread if you have it, I hand sewed it
into place using whip stitches again. I tried to make these as discreet as possible but the
velvet was very forgiving, hiding the stitches in the fabric pile. The exact same process is
done to the brim. Velvet, batting, pinning, basting, velvet. I did find that clipping into
the velvet in the inner curve was essential to make it lay nicely. The lining was again pieced
and hand sewn. To fit the band to the brim, I loosely pin it into place. You can see here that
my brim is slightly bigger than the band but I make sure the back and front are aligned and
then whip stitch them together. It sort of evens itself out in the end. The base hat is done.
On to my favourite part, the trimmings. I cut a wide band out of my stripped suiting
with pinking shears, then I pleat it. I pin it into place on the hat and secure it with,
yes, a glue gun. Don't come at me. I secure it at particular places across the top so it sits flush
and then add feathers. And more feathers! I'm not quite at the extra level of the original hats but
maybe one day I will trim it with even more feathers. It is absolutely my favourite bit.
For the smaller white feathers, I gather them into a little bunch and then roll the ends on
a bit of glue, securing them into a little bunch and then add these throughout the hat.
And with that, my 1890s walking suit is finished! This was such a good project, I learned so so much!
Thank you for watching!