Beginners Intro to Wedging your Clay.

Making ceramics and glass
106 followers
Give it a little smiley face right there, pretend you're happy to be in class.
Hello you dirty potters, how are you today? Today we're going to talk about wedging clay.
Now if you're a true beginner, not only do you not know how to wedge your clay, but you most
likely don't understand the importance of wedging your clay before you even throw it on the wheel.
And today that's what we're here to talk about. Let's start off with some very basic knowledge.
This is a bag of clay. While this is most likely what you're working with, this isn't what most
people consider real earth clay. This is ready made clay, specifically for crafters. Real clay
comes from either the earth, mountains, streams, or other natural sources. Some people also call
it wild clay, but that's not what you're working with today. You're working with ready made bag
clay. This means a company or a corporation got it from any of those earthly sources and put it
through a process, added extra chemicals to it, and bagged it up just ready for you to use on
your wheel. And while these companies have done an amazing job to grab it from natural sources,
process it, get all the air out of it, compress it, and make sure all the clay platelets are well
stuck together, ready made for you to craft with, you still have to wedge this yourself.
Give it a little smiley face right there, pretend you're happy to be in class.
Before you put this clay on the wheel and start crafting with it, it is best that you wedge it.
It familiarizes you with the clay, it gets the clay out of its old memory, and it aligns the
clay platelets. There are many benefits to wedging your clay before you put it on the wheel, and to
be honest with you, it just makes it an easier process to craft with. And there are two main
ways that myself and most potters that I know know how to wedge. Come on, come with me.
Now this here is plaster, and the reason that most people wedge on plaster is because it's
very absorbent and very durable. This is an extremely good material for soaking up the
water inside of your clay body, although I've seen other people use other materials such as
wood and concrete. I myself wedge on my concrete floor over here, because it absorbs water just
like this plaster or some wood does. But if you're in class, you're most likely using plaster just
like this to let your clay dry out and wedge on. Yours is probably like way bigger though.
Yeah, I'm just gonna get rid of this now. There are two primary ways that I know and most potters
I know know how to wedge, and that's ram's head wedging and spiral wedging. No one way of wedging
is better than the other, and while spiral wedging looks a little bit cooler, you really only need it
for very large pieces of clay. And most beginners, or even myself after about six years of using clay,
I majoritively use ram's head wedging. It's not as difficult, it's way easier on my muscles,
and I really don't need this method of wedging. This method of wedging over here doesn't really
help all that much in comparison to ram's head wedging. It's honestly just preference. No way
is better than the other. Ram's head wedging is called ram's head wedging because when you're
done wedging it, it kind of looks like a ram's head, or a really grumpy grandpa. Except for
nobody wants to call it grumpy grandpa wedging, so we did ram's head instead. It even makes a
spiral for the horns over here, and the more that you wedge, usually the more horns that you get.
Just like, oh! There's a couple of reasons you want to wedge in the first place. Number one,
clay usually comes in a bag like this, and this bag comes in the shape of a square like this.
Clay has a habit of sticking to its form, and for lack of a better term, it kind of has a memory to
it. Wedging your clay is going to kind of get rid of that memory. You don't exactly want it
in the square shape when you start putting it on a wheel and crafting with it, because you're going
to be spinning around in a circle, and that circle is in the form of a ball, and that's the final
shape we're trying to get while wedging. Oh, but Dante, I don't want to wedge my clay. It hurts,
and I'm lazy. Keep in mind, if you don't get rid of this shape, or the memory of this shape,
you're going to have a much harder time throwing on the wheel, and you're just going to make your
experience with throwing on the wheel a little bit less satisfactory. You're going to have a bad time,
and as a beginner who most likely doesn't know how to deal with uneven clay yet, you're setting
your clay to be uneven from the get-go, so it's best that you wedge your clay for that one reason.
The second reason is that clay is technically made of these little platelets, and these little
platelets can bind and stick together. The more you condense them, the more tight knit they are,
and the easier it is to control your clay. These platelets binding together make the clay a little
bit stronger and easier to form with, and that's the second reason you really want to wedge your
clay. You're essentially recondensing those platelets inside the clay body. The third reason
isn't as important right now, because the clay company took very good care of this clay for me,
as it is now ready to use fresh out of the bag. But, if I threw with this clay, put it back in
the bag, took it back out, I would almost have to re-wedge it. The reason for that is when you
threw it, you most likely got a little bit of air bubbles in your clay, because it's not like you
condensed your clay and put it back in the bag. You most likely have some air trapped in between
the folds of your clay, and re-wedging it compresses that clay so tightly that the air
bubbles stuck in the folds or the manifolds of your clay will actually pop right out. Sometimes
you can even hear it. Many crafters, myself included, will tell you it is almost the most
annoying thing ever to find air bubbles in your clay body when you're throwing your clay on the
wheel, and it'll also mess up your product, especially if you're a beginner and you don't
know how to deal with air bubbles properly. That being said, let's go over ram's head wedging first.
You want to start your ram's head wedging by grabbing the top two corners
and compressing downwards in this motion. You're essentially not pushing sideways,
you're not pushing down, you're kind of pushing diagonally and down as you go forward into this
direction. Make sure to keep your hands on the sides of your clay body and don't put them on the
top. If you put them on the top, you're essentially going to be pushing your clay body into the ground
or whatever you're wedging on. You really want these two horns to stick in, which is why at the
If you're just compressing downwards, you're simply going to smash your clay.
Look at that, that's the most unhappy ram I have ever seen in my entire life.
Also, if you're pushing from just the sides, you're basically just condensing it into itself
right here, and you're not really wedging at all. The point of this is to go into a spiral
coming towards yourself while you're pushing outwards, and it's basically going in the
motion of a wave over and over again. Grab the sides, push downwards and out. Make sure to hold
on with your fingertips up here so you can bring it back up and do it again. If you're truly a
beginner, there's no shame in wedging just like this, letting go, bringing it back up, and doing
it all over again. It does not have to be one fluid motion if you're just a beginner. That
motion will come with time. Potter tip! I meet a lot of people who wedge like this, where they
only use the strength of their elbows and their arms, and this isn't really beneficial, because
the entire point of ram's head wedging, as far as this one section goes, is to really push that clay
body down and up into a spiral just like this. If you're having a hard time doing that, or you
simply don't have the upper body strength like some of us do, it's always majorly beneficial to
not only wedge with your arms like this, but to have your body lean into it like this. Go ahead,
grab it by the horns right here, straighten your arms out a little bit like this, bring it back up,
and just lean into it. And as long as your hands are on the side right here, your thumbs are on the
top, and you're pushing downwards with your entire body, you're good. What's way easier is to simply
use your entire body to make sure that weight pushes down on the clay body. This is much easier
and gives you a little bit more rhythm to the cycle as you go along. If you can do all those
steps in one motion, you've essentially ram's head wedged. You grab the top, you hold your hands on
the sides, put your thumbs up here, push down and in with your thumbs and your hands. Once you reach
the very bottom, pull back up with your fingertips and just keep on doing it again and again.
If you do this all in one fluid motion, what you're honestly doing is you're bringing it up,
you're pushing your hands just like this, kind of like you're torquing a motorcycle handle except
for sideways instead of like this, and pushing down at the same time. That's really all you're
doing. If you watch my hands in slow-mo, you can see that I'm twisting my hands as I push
downwards, all while keeping my hands on the side of my clay body. If you can do those three things
at once, you essentially know how to wedge. Potter tip! After you've gotten a nice little
ram's head from your wedging process, I like to bang it on four different corners.
Then I like to just slap the sides in.
And there you have it! One nice big ball of clay that you can now throw with. It doesn't
have to be perfectly round, but it does make the process a lot easier when you throw this on the
wheel than it would if you started from a square. Spiral head wedging is a little bit more advanced
and a little bit complicated because it kind of looks like you're wedging on the side of the clay
as opposed to on the flat part of the clay like you would be when you're ram's head wedging.
You remember how I told you have to twist and compress when you're ram's head wedging on one
side as you push down? Well, you're essentially doing the same exact thing on one side of this
clay. The only difference is you're doing it with both of your hands and on one side.
The main benefit of this technique is that you're able to wedge a much larger piece of clay,
but I'm talking like 15 to 20 pounds. It's not like you really need to spiral wedge
for just 5 to 10 pounds of clay. You can easily ram's head wedge that.
Perfect. Perfect. Perfect. Perfect. You see, with ram's head wedging, you're having to push
all this clay into a center, and if you're not super strong or you don't have a lot of
upper body strength, you're essentially trying to push all this clay into itself,
and you're only going to be able to make a baby ram. This here is about 15 pounds of clay.
But if you spiral wedge, you're really just spiraling this part up here and pushing downwards
as you crunch this into a nice spiral. And this is where all your clay is really getting wedged.
Yes, I know this looks a lot cooler than ram's head wedging, but to be honest with you,
this hasn't really helped me that much in my ceramic art career. I've been getting by with
ram's head wedging for the good about 5 years of the 6 years that I didn't know how to spiral wedge.
And the only time I do spiral wedge is when I have an extremely large piece of clay,
something like 15 to 20 pounds, that I simply can't wedge myself. But I've practiced ram's
head wedging so long that I can essentially wedge 15 pounds with ram's head anyway.
I just want to remind you that both ways of wedging are valid and acceptable. I see too
many YouTube videos of people spiral head wedging, and people seem to think that they're only for
advanced people. They're really not. Some people like ram's head wedging, and some people like
spiral head wedging. But both ways are completely valid and usable. After this, you can do the same
thing we did with the ram's head wedging, and there you go. Now you have a nice big ball of
spiral wedge clay to throw with. For extra potter points, you can always just tear this
apart with your cutting wire right here, take this piece, and see if there's any air pockets
inside of your clay. If there are none, then good job. You did a very good job at wedging.
Yeah, this episode's just full of smiley faces. Well, thank you Dirty Potters for joining me
today. I really just wanted to show you guys how I wedge. If there's any additional comments from
other potters down below for the benefits of wedging, go ahead and post them down below.
And I want to say this one more time. Spiral head wedging versus ram's head wedging,
they're both valid ways of wedging. No one way is wrong, and no one way is right. I know plenty
of top-tier potters that spiral, and I know plenty of top-tier potters that do ram's head.
Both of them are valid ways of wedging. It is not something to argue about.
But thank you Dirty Potters for joining me today. If you'd like to see any of my artwork,
the links are always down below for your beautiful potter eyes to see,
and I will see you Dirty Potters next week for the centering video.
I just taught you this first because you better wedge your clay before you start centering.
We are not animals. We are sophisticated potters.
