How to make a teapot on the pottery wheel | POTTERY 101

Making ceramics and glass
106 followers
I'm making a teapot as part of a commission for a shop. Some teapots have been ordered so I've got
to make them. Today I'm just going to take you through the process of that, of how I do that,
of how I approach it, of things that you need in a teapot, how to make sure it pours properly,
how to make sure the lid fits, how to make sure it looks nice, and that's about it I guess. You
know, we don't need too much of an introduction really. Let's talk about what a teapot needs.
A teapot that is a good teapot needs to have a few things. So we need to have the body of the
teapot of course. That's where the tea goes, that's where the tea steeps. You need a lid
that goes on the top of the body. You need to have a spout. A spout is where the tea obviously
pours from. You want to make sure that's not dribbly or drippy. You kind of want to have a
beautiful stream of tea coming out of the teapot. And you need a handle so that you can pick it up
without burning yourself. That's kind of the main thing. So it's like four elements. If you've ever
wondered why handmade teapots are so expensive, it's because they're fiddly to make, they're
complex, and they take a lot of skill. So if you're new to ceramics then I think it's a good
challenge, but it's not until you're kind of a little bit further down your journey that you're
able to make consistently good teapots. And I think that they're fantastic things to practice,
and I remember my very first teapot that I made, the lid stuck to it so I could never actually use
it, but I used it as like a flower pot. I put flowers in the spout. Real silly, but whatever.
I just want to take a quick wee sidebar to talk about something very important, our mental health,
and how this video's paid partner BetterHelp is on a mission to making starting therapy easier.
Life can be a lot sometimes, and just like ceramics, it's all about balance and care. I know
a lot of you watch these videos and maybe even do pottery yourself to look after your mental health,
so take the next step and try talk therapy. BetterHelp is an online platform that makes
professional therapy incredibly accessible and convenient. Starting therapy is super easy with
BetterHelp. Fill out a questionnaire and you will match with a therapist in as little as a couple
of days. One of the best features of BetterHelp is if the first therapist doesn't feel right,
you can easily switch to another until you find someone who you really connect with. You don't
need to have a clinical mental health issue like depression or anxiety to benefit from therapy.
It truly is for everybody. As a special offer, BetterHelp is giving my viewers 10% off your
first month. Use my link here or in the description below to get started. Try BetterHelp today.
Okay, back to it. So we're going to start with the clay. We're going to start with about a kilogram
of clay for the body, and then we need, I don't know, maybe two or three hundred grams for the lid.
We need, I don't know, 500 grams maybe for the spout, which seems like a lot,
but we're going to throw it off the hump. So we have like a few different options for spouts,
and then we need a handful of clay for the handle, two or three hundred grams as well.
For all these things, I like to make a few. So we've got some variety, we've got some choice,
and if things don't fit, then you can always swap it out for another. Someone, hopefully,
one day will buy them and enjoy their teapots for the rest of their life, because a well-made
teapot should last years, years and years and years. Maybe it's going to be a family heirloom.
No pressure to me, but, you know, I better make it good. I'm making two today. I don't know what
type she wants in her order, so I'm going to make the two styles that I make and then let her know,
and she can just pick which one kind of suit her style the best, and then we'll chuck it on the
As with anything that is kind of big, I like to throw on a bat. Throwing on a bat means that you
can remove the piece without messing up the shape, and this is important, especially when you're
making something with a lid. If the rim moves, then the lid won't fit later down the track.
I'm starting with a bat on a bat ring. So you just kind of throw a little flat plate thing,
and then you attach the bat on top by punching it down. As I mentioned, today I am throwing two
kind of different styles of bodies today. One is more like a tall coffee pot kind of thing,
and the other is a slightly more traditional teapot. I start off with the bodies, as I find
them the most challenging compared to the spouts and the lids. We're starting with the kind of more
coffee pot shape, which is a tall, slightly cone-shaped cylinder. Pulling something that
is tall and straight or cylindrical is the same kind of motion as doing that bit with something
smaller, but you can pull a lot more clay from the bottom in your first pull. If you need to
colour it in to keep it in shape, then you should do that, and to maintain strong rims, make sure
you remember your ABCs. Always be compressing, okay? That's the golden rule. Measuring and adjusting
the intricacies of the pot, like maybe it's too wide, or it's not wide enough, or it's not quite
the height you want, are really important for the general harmony of the shape. Once the rim width
is set, I like to measure it twice just to make sure, note down that measurement, and set up my
calipers to the same size. This will come into play with the lid later. After measuring and adjusting,
I always follow with the wooden rib tool to remove any excess slip and to keep it perfectly
straight. This is optional, if you are making a round or a less rigid shape to me, then you can
skip this if you want to. After I use the wooden rib, I always just double check the measurement
one more time to make sure that I haven't pushed it out of kilter, and then I follow with the
finishing steps, like sponging, cutting a little notch under the pot, and then wiring through.
The next pot follows all of the same starting steps. We center, we open, we pull up the walls,
and then this one's body looks a little bit different. I am making a straight-sided one,
and I'm flipping down the very top of the cylinder to create kind of a squared shape. I do this very,
very carefully and very slowly. Faffing around with the wooden rib tool is key to getting it
to sit flat, but also so is patience. If you can't get the clay to behave, honestly just come
back after you've had a little bit of time to practice and when you're fresh, because it can
be quite a difficult process. I do the same thing for these ones as with the taller ones. I measure
the opening, note it down, and save it for later for the lids. If it's a little bit too narrow,
like this one was, I just use a pin tool to trim a little bit of excess clay off to widen it out a
little bit. And then the same thing, remove any water from the inside and go about wiring off.
So these teapots can be set aside now whilst we get started on the lids and the spouts.
Right, so before we get started here, there's a few things that you need to know about a teapot's lid
and a few ways to approach them. The goal of a lid is to sit snugly into the body, keeping the steam
in the teapot and the tea warm. You can achieve this by using these elements, but you don't have
to use all of them because there's loads. So I've drawn a little picture of a cross section of a
teapot so you can understand what I'm talking about here. First of all, things on the body.
The gallery is the recessed area around the opening of the teapot where the lid sits. It provides a
secure resting spot for the lid to prevent it from sliding off when you pour. The gallery's
depth and shape are kind of crucial to ensuring a really well-fitting lid. Next is the flange and
this is kind of a small vertical ridge or protruding edge on the pot that extends upwards
from the gallery on the teapot. It helps the lid stay in place and it kind of provides stability
when the teapot's in use. And then on the lid itself, we've got the lid flange and this part
of the lid is the interior rim or the edge that extends downwards into the teapot body and that
sits snugly in the teapot gallery if you have one or just kind of against the body. It ensures that
the lid stays secure especially when you're pouring and it prevents it from falling off.
Then we've got the lip and the lip refers to the top edge of the lid. There's lots of leh in here.
It's the outermost part and it generally sits on the gallery or the topmost part of the teapot
itself. And then the knob. The knob is the handle or like the grip on the top of the teapot which
just kind of allows you to take it off really easily. And knobs can come in various shapes and
fibres and often just kind of decorative rather than useful. I don't use all of these lid features
for my teapots. My lids simply sit on top of the teapot. The lid itself has a lip and a flange to
keep it in place. I also don't make knobs. Sorry, we're mature here. I'm so sorry about that. If it
was recessed into a flange or a gallery then you would need a knob but yeah for me I am okay
without them. So on that note it means that I make my teapot lids upside down. I make my lids
on a small bat and since they're flat upside down works fine for me. But if you don't want a flat
lid and you want one that's kind of rounded like the shape of your teapot you can throw it off the
hump and make it right-sided up and either don't include a flange on the lid or you can trim it in
later. This whole lid business can be quite hard to explain so it's absolutely worth having a bit
of a play to see what kind of lid suits your teapot design and like sits properly on the bodies
of your teapot. I know that I'm kind of breaking the rules of good lid design and lid etiquette
and like the pottery rules or whatever with my pieces and I'm okay with that because I'm slightly
favoring form over function here. They do work. I think they would probably work better and I would
have less failure if you were to add a gallery or a flange to your teapot. Okay next up is spouts.
I throw my spouts off the hump as I find it so much easier and so much more efficient to
just center one piece of clay rather than loads of tiny pieces over and over again. I always make
way more than I need because I like to pick my favorite ones and kind of the spout that best fits
the teapot and also I think throwing off the hump is a lot like pancakes and you always kind of make
a few mistakes while you're doing it. So first of all you want to center the clay and then you want
to pull up a small section in a cone shape and then refine it a little. I like to use the wooden
rib tool, surprise surprise, to get it nice and straight and then I cut a little gouge into the
base with a knife tool before I wire it off and set it aside and then you just kind of repeat that
process until all of the clay is gone. It doesn't matter if these are kind of tubes or if they're
little pots with bases because you'll be cutting off the base to attach it to the teapot in due
course anyway so it kind of doesn't really matter. Before I make too many though I want to show you
how I create spouts that consistently pour well. I thin the clay out a little bit on a wee area by
wetting my fingers and just kind of rubbing gently and then I place my index finger and my thumb on
either side of the outside of the spout before pulling my index finger of my other hand through
that gap. It's quite a mouthful but obviously you can see what I'm doing here. This creates a
wee channel for the tea to flow out of and try not to mess with this too much, try and just kind of
do it and then leave it and you want it to be nice and sharp so that it kind of cuts the water when
you stop pouring. Handmade teapots I think always have a risk of a little dribble here and there
which in my opinion is absolutely fine. Having a big stream of liquid pouring down the side of
the teapot is not okay though and this little trick really does ensure a good pourer. Here
everything is off the wheel and drying a little bit on their wee bats. Smaller pieces like spouts
will likely dry way quicker than bodies so wrap them up if you're leaving everything to dry
overnight. Okay we're back next day in the studio and everything is perfectly ready to trim and
assemble. It's still very warm in my studio at this time of year so I'm lucky. Any later into the
cooler seasons and the teapot bodies might take a little, I don't know, like an extra day or so to dry
so just keep an eye on everything and wrap things up as you need to. Anyway before trimming starts
it's time to make the handles before anything else. So I make slab handles as the square shape
of my slabs kind of suits the squarish shape of my work really well. I'm gonna link a video that
I made recently about how to make handles in the description so check that out if you need some help
with how to make pulled handles or other handles. I'm not gonna go too in-depth here. Anyway after
rolling the slabs out I cut them out and then I shape them and set them aside to harden up while
I trim my pieces. I'm gonna show you how to trim and assemble the square teapot rather than the
cone-shaped one although they are very much the same process for both. I'm gonna flip my teapot
upside down on the wheel and center it and I'm not adding a foot ring here I'm just tidying
everything up so I'm just going in with my big teardrop loop tool, cleaning up the base,
cleaning the walls up a little bit and adding a nice defined chamfer. There's a 45 degree
angle between the base and the wall to kind of elevate the piece a little bit.
After that process is done I flip it back over and I re-center it back on the wheel but right
side up this time and just tidy up the top of the teapot and the wee corner piece before placing
lid back on. Honestly I don't know why I did this I attempted to trim the teapot on the body
which you can see it didn't really work um it doesn't need that much work it just kind of needs
a bit of a tidy up and I need to level the lip out a little bit so that it sits really flush on
the teapot body. So I've you know attached it to the wheel head and then I've used this little
spinner tool to just press the lid down instead of using any water or any lugs to attach it to
the wheel. You can get these at most pottery supply stores and they're very helpful for
things like this and honestly that's kind of it I find them kind of annoying for everything else.
Anyway after a quick sponge down and a fit check it is time to move on to
attaching the spout. Currently the spout is shaped like a cone so we need to sort of chop the corner
off because we don't want it to sit horizontally we want it to sit kind of diagonally to the teapot
if that makes sense. I don't really know what angle I'm cutting here but let's just say it's
like around 45 degrees give or take. I just do this by eye but you can trace a path that you
want to cut with a needle tool if you're not sure. This is a confusing thing to explain but make sure
that the channel of the spout that you pulled is on the long edge so that it faces down when it's
attached. To make sure it really sits flush it needs to be rounded a little bit so you can either
cut some more off to match the external shape of the teapot body or you can use something round like
the handle of a trimming tool for example to just kind of roll around and press into it and then you
want to check that it sits flat without wobbling too much. Deciding where you want to attach the
spout isn't just an aesthetic choice you need to make sure that it's at the highest point possible
so that when the teapot is filled with liquid it won't come pouring out of the spout. So the lowest
point of the pouring end of the spout is the highest that the water level can be so bear that
in mind. You want to dab a little bit of water onto the teapot side of the spout and then gently press
it into the wall of the pot and this will leave you with like a little ghostly ring to show you
where you can cut a hole or a few little holes for the tea to flow out of. I use a hole cutter to
cut some holes in the side of the teapot body but you can just use a knife tool or something
to cut it out. Next you want to score both the teapot and a ring around the cut holes and the
spout and then you want to apply a little bit of slip to the spout. I like to tidy the inside of
the spout before attaching so that I can kind of minimize cleaning up later because it is a real
drag. Position the spout in place on the teapot and then supporting the teapot with your non-dominant
hand firmly but gently press the spout onto the body. You really want to force it on there.
Obviously you don't want to deform the body but you do really need to make sure it's attached
properly. You can then blend the spout into the body which can take a very long time so get comfy.
I sometimes add a little coil around the join if it needs it. This obviously needs to be blended
in as well. You want to finish that off with a sponge down to tidy everything up. Next it is time
to add the handle. You can either attach the handle kind of on top so it kind of arches above it or
you can attach it to the side like I am. I like to line up a straight tool over the top of the teapot
from the spout to where the handle will join so that you know that it's in exactly the right spot.
Sometimes eyeballing it can be a little bit wonky. Score, slip and attach. Again if you
need more help with handles you can check out the video that I've linked in the description.
After it is attached you want to sponge it down and slowly let it dry. If it is quite warm in
your studio you want to leave it with some plastic draped over the top with the lid on
and if it's chilly you don't need plastic but you need to keep an eye on it because you don't want
the spout or the handle drying quicker than the body because that may lead to cracking.
Here are my two finished teapots dried to bone dry and they are ready for a bisque firing before
I glaze them. Floating a bisque can be a little bit scary when you've spent hours and hours on
these pieces so please be gentle and if you need a little video about that that's here.
Just to be clear I do care about the climate and I always fire my kilns full. Full to the brim,
full to bursting. In these videos though I cut out all of the other stuff that gets loaded in
but I just wanted to add that as a little PSA in case you think I hate the climate. I love the
climate. I'm very fond of it. Okay in they go. Good night. Sweet dreams little babies.
Today is glaze day. I don't like glaze day. We've got a hot kiln. We're gonna open it. We're gonna
unload it. Let's open her up. It's very hot. I'm gonna need gloves. It's glaze day in the studio
and I have six teapots that have come out of the kiln and two of them sadly will not be being
glazed today and four will be. We have this one which has a very bizarre crack in the spout here.
I've never really seen a crack in this place on a teapot. I think that
maybe there was a crack before it was attached and it's just kind of like opened up a little bit
wider. I don't really know. That's fine. That's not going to be glazed sadly. This one there's
a little crack on the handle. There it is. A tiny teeny tiny little crack. So he's not going to be
glazed either because I think it's very important with teapots is that they can hold their weight
when you're pouring the tea and the user has to kind of trust that everything is going to be okay
in terms of holding the teapot and I will say that a crack in the teapot immediately questions
the structural integrity of the piece you know so this guy's not going to be glazed either sadly.
In terms of the other teapots, this one I'm a little dubious about because
the lid fits perfectly now. If I twist it, it actually locks into place which is like kind of
nice but it's slightly worrying because as soon as this gets a layer of glaze on
this area and on the inside here it may not fit anymore so I'm going to glaze just the top of it.
I'm not going to glaze this like inside flange piece but I will glaze on the inside here. This
is the risk of doing teapots in the way that I do them and lids in the way that I do them. If you do
them the proper way then ideally it should always fit and a layer of glaze isn't going to get in
the way of a good pouring teapot. Okay so I have quite a lot to glaze today. I'm also filming a
vlog as well as filming this teapot video so I'm glazing in four colors today but only three in
the teapots so I've got a honey, I've got a pink and I've got two chalk because I know that they
all look good. I don't really know about the blue because I'm also glazing in blue today. I just
think that blue is too harsh for these teapots so I'm going to get that in this. Okay well first
of all there's quite a lot of stuff in here but let's get rid of that. Okay, glazing teapots can
be slightly chaotic because they don't always fit in your bucket which is a pain. This one will not
by like mere millimeters so unfortunately I'm gonna have to work out a different way to glaze it
to what I would usually do for normal glazing stuff. I do have this big bucket here that had
this same glaze in it yesterday. Perhaps if I fill that up, perhaps, oh you can't see that,
perhaps I can submerge it and hopefully we have enough glaze. Let's see. I'm just gonna glaze
these, get them out of the way first. Okay we'll glaze this guy first and I'm gonna just dunk it.
This is just a regular situation. We don't need to worry too much about this guy.
He's done. Let's put him aside. I can tell that there is not enough glaze in this to fill where
it needs to go. There's like maybe an inch too little glaze. So I'm going to glaze the inside
and then I'll turn it over and I'll dunk the outside and usually the like displacement of
the liquid in here will be able to bring the glaze up the sides. Because it's a teapot there's
two entry points for the liquid and so sometimes that bubble that you get when you glaze a cup
upside down doesn't exist. So we might need to do like a swirly situation. Guys wish me luck.
I'm nervous about this, you're possibly nervous about this. We're in it together okay? Damn it.
This is my least favorite situation when this happens.
So that water, that liquid displacement thing did happen.
We've got a little chatty Cathy on our hands. Okay you can see that the top
has absorbed more glaze than the bottom and hopefully we can get away with that. Hopefully
it's not too obvious when the glaze melts in the kiln that this part at the bottom has had
significantly less. This is the thing with glazing when you only have a certain amount of glaze and
you've got big items to glaze. It can be really difficult and so sometimes things like this get
a lot more glaze than this area here. Hopefully we can get away with it. Teapot two,
I'm really hoping fits in here. It's a little bit narrower of a form because obviously the
body is taller. Taller and narrower. So fingers crossed we can just put it in here. Dunk her in.
It's always a little scary. I'm going to pour it in and then I'm going to dunk it like that.
The thing to note when pouring and dipping is you want to cover the spout when you're pouring it in
otherwise you're going to get to the level of where the holes are and it's just going to start
pouring out of there. So you want to block that so you can reach the rim of the pot and then we're
going to dip it and hopefully, hopefully there's enough room. I might kind of squeeze the bucket
like this to keep, to give it just that little extra. We got away with it. Ta-da.
Okay my friends, I've got to go now. The kiln is on. I will see you in two days. This is going to
be an issue. I'm going to have to take this off. We're unloading the kiln today and it's full of
teapots. It's full of other stuff too but it's mostly full of teapots. Okay this layer is the
teapots layer so I'm very excited about this. Okay. Hello sweet babies. First of all we've got
this chalk one with its lid. Fits well. No cracks. Lovely. Look at that. That is so pretty.
Second we've got this pink one which I wasn't sure if the lid was going to fit so we didn't glaze
the inside part of the lid. So we'll see. Nah. Not even close. I could sand this down a little
bit and get it to fit but currently it doesn't fit. It's such a nice teapot. It's a shame.
Yeah well. Well that's just a jug now. A teapot without a lid, it's just a jug.
We all love jugs. Next we have a honey one of this square style and the lid.
Close. She's so pretty. Okay cracks. Do we have it? Oh we have a crack. Oh that's so sad.
It's in the handle here. It looks so nice though. God that's such a shame. RIP little baby.
Okay. Fingers crossed this one is okay. No cracks. Stunning. The emotions really go from
zero to a hundred when it comes to unloading a kiln. This one looks great. So this shop has
ordered two teapots and we have two teapots. I'm glad I made six because we got two out of it.
That's not a very good success rate. You know usually I have higher success than two out of
six but you know it is what it is. You gotta live and you gotta learn. Like that looks so nice.
Oh well. What can you do eh? Had to put this on because it was too sweaty from the kiln and it
was very distracting seeing my big sweat patches. Okay uh there's a couple things left to do. One
pour one out for our fallen soldiers. The ones that haven't made it. The best squares. This
cracked one and this one that's just a jug instead of a teapot. Straight onto the ground. We'll say
what a great pour. I'm just gonna mop this up. Thank you my friends for joining me on the quest
to make two successful teapots. Not a great success rate and I'm gonna have to try harder
next time because I don't like spending hours and hours of time um on six items that should
bring me money that I actually only get two from you know. It's a bummer. Anyway I've had
so much success with teapots in my life and um you know it just so happens that I didn't have
success whilst I tried to film it but it's fine. We had two success. It's not too bad
you know and at least they're a pair. All right I will see you in a couple of weeks for another
video and I hope you have a lovely time making teapots as well. You can catch me on Instagram
and TikTok in the meantime if you are desperate for more videos. I get it and I thank you. Thank
you very much. But I will see you again in a couple of weeks for another pottery related video. See ya.
