9 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney #HowTo Cordless Drill
This video is a little longer because I show a lot of the attachments you can get for the drill.
If you just want the basics, you probably only need to watch the first 6 or 7 minutes.
The DeWalt drill is $99.00, it was double that a couple years ago.
Here is an affiliate link to the drill;
https://amzn.to/2Z22BOv
Here is an affiliate link to a basic set of drivers;
https://amzn.to/2V8HQiP
Here is an affiliate link to some bits:
https://amzn.to/2Z5b8A3
Here is an affiliate link to the spade bit set I have;
https://amzn.to/2NqWYEd
Here is an affiliate link to a hole saw kit;
https://amzn.to/2CzYXUy
Here is an affiliate link to the socket adapters for the drill;
https://amzn.to/2GjgDp7
Here is an affiliate link to a basic set of sockets;
https://amzn.to/31SaGb5
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo #Drill #cordlessdrill
hey kids so it's tool Tuesday we're
finally getting to the drill I know that
it's been a while in a while everybody's
kind of been waiting for it but I wanted
to kind of build up to it because you
needed to know about sockets because you
also use sockets with with your drill
and the different pieces we haven't got
to the screwdrivers but I think you know
I can kind of introduce screwdrivers a
little bit or at least the tips and what
they are called and I'm gonna put it put
together a series of smaller videos and
I'll string them all together showing
how each piece works so I'll clear my
table and show each individual piece but
before we do that you know the drill I
got a bad joke for you bonus bad joke
right well it's going to tell you a joke
about a drill but I thought it was too
boring yeah so anyway let's get into it
okay so before we even get into the
cordless drill I wanted to show you what
I've had this for probably 25 years I
think and this is what we used to do
this you can tell it's kind of it's been
used but um and so this is kind of the
concept here right you're gonna deal
with this these jaws here that are gonna
hold your whatever bit you're gonna put
in there okay and so kind of how this
works is you can hold hold it hold it
down and see how those those are opening
up inside there and then if I flip
there's a it's a reversible variable
speed okay and that's what most cordless
ones are - so you can if I put it on
reverse and I hold this Chuck right here
I can go like that and you can see that
it's actually tightening okay so it's
all the way tightened now if I flip the
switch and I do the same thing the
opposite way I can open those back up
okay so we're gonna do that with with
the cordless drill so back in my day
this is kind of all we had and then you
would put your bit in here okay so a
little bit put that in there
hand tighten it and then you'd have on
your
or you always had a Chuck key okay sorry
I'm fighting it here um you have a Chuck
key and then you'd have to tighten it
down so you go like that and tighten it
down okay and then you'd want to go I
was always taught to go around it I
don't know that that matters but now now
you're good to go okay so I just wanted
to show you something for comparison and
like I said this is a variable speed
which means if you hold down the trigger
lightly I can go a certain speed or if I
put it okay all right so that's that
okay so here's here's the drill that I
would recommend for most homeowners
because it's around $100 and it's served
me well I've had it for I think a year
and a half and the battery you know the
big part of the quality and a cordless
drill is the battery if you get if you
go to cheap the battery won't hold a
charge after a while and you'll be
frustrated so I would highly recommend
you spend you know again it's $100 so
yeah so I think you'll be happy with
this drill it has two speeds a 1 and a 2
right here the one is for speed and then
the 2 is for torque don't worry about
that too much
I just basically leave it on one for
most most jobs if you're just drilling a
hole in sheetrock or whatever you can
get by just leaving it on one I hardly
ever take it off of one okay and then if
we're gonna add a bit to it okay
actually let me show you this first so
there's there's this collar right here
this inside collar and it has a series
of numbers on it one all the way up to
where it's got a drill bit on it okay
and when you're going to change your bit
remember how I showed you that cordon
drill how you have to change the bit
kind of similar but we're gonna you
won't need to actually use that Chuck
key to tighten it down and I'll show you
what you need to do so you're gonna hold
this and then you're gonna I got to get
it tight enough to where it'll actually
open okay so you have to keep turning
that then you see that I kept turning
this inside collar
so that this thing would actually open
so now if I hold this color here and I'm
running it at 13 right now the further
down you go it's easier to hold it yeah
so let's just put it at like 11 so now
I'm gonna hold it I'm just holding that
lightly
and see how the jaws are opening okay
and again it's a very good speed to okay
so now we're gonna put this this is the
bit I almost always use I just leave
this bit in there because it's a
phillips head and it's and it's got a
good point on it so it fits most of the
screws that I usually use okay so now
I'm just gonna put that in there and
then I'm gonna put it I'm gonna push
this button okay the forward button and
then I'm just going to hold it hold this
right here right I'm gonna hold it and
see I don't you can see that let's see
anyway the jaws are closing around it
okay see that and then I just hold this
and if I put this on a on a lower one
it's really easy to hold this the
further I go up though it gets harder
and harder to hold that if you go all
the way up to the the drill part it's
really hard and I think you can even
flip down yeah you can actually hold it
at the at the drill unless you're
stronger than me maybe you maybe you can
okay so and I'll show you with all those
dials are for for other things but if
you're trying to put put a bit in you're
gonna want to put dial this down a
little bit so that you can hold this and
then now I just put it on reverse and
I'm holding it not quite enough I need
to dial it up just a little bit a little
bit more yeah so that I can actually get
that thing to come apart okay okay so
that's the basics of it now we'll walk
through all the other pieces I realized
I should have showed you the battery -
you're so right so the battery pack is
right here
and all you do to change the battery is
you just push down on this button here
and slide it out okay and this one here
it's been charging so the lights
actually read when the battery needs
charging actually that's going to pop
this out I'll pop in this one let's see
that the light actually flashes because
it's being charged this one was fully
charged that's why it had the red light
so then now all we do is we just take
that and we stick it here and slide it
right in okay so I'm gonna show you how
to put in drill bits kind of the same
thing that once you understand how how
to add your different bits it's fairly
easy and there's so many different
attachments that you can put that you
can use for different jobs
so first we'll just start with a mic so
you have wood drill bits and then you
have metal drill bits okay and the case
is all the cases are tough to open at
least for me maybe not for you over
there for me uh anyway so and you can
see that I've actually lost or broken a
lot of the smaller bits get broken if
you're not careful so I've managed to
hang on to most of the other bits but it
just happens right
I managed to hang on to all my metal
bits these are metal and then these are
for wood they're just designed a little
bit different so when you pick them out
so I actually put I put wood drill bit
so I just ended up right not right on
the side okay so basically the same
thing again this is a quarter-inch I'm
gonna put it inside let's see so I want
to put it on a lower speed so I can hold
this and then all I do is I just stick
it inside there and I just kind of hold
on to it while it tightens it around it
and then I hold on to it no it's in
there and then now if I want to drill
for drilling you put it on that drill
setting okay and then they need to be
good if you needed more torque for some
reason where you're going through metal
with a metal bit then you put it on too
and just kind of take it slow
roll through whenever you're going
through metal you want to take that slow
okay so all right so that's that okay so
we got our piece of wood my trusty piece
of wood that I keep using I'm gonna show
you how to put a screw in okay so this
is just a Philips head um tip like I
showed you and then this I showed these
screws before I use these all the time
they're just sheetrock screws so if you
go in looking for sheetrock screws at
the hardware store you should be able to
find them the nice thing about them is
they got a nice coarse thread on them
and they tend to hold pretty well okay
so I'm gonna go ahead and put my my bit
back in and just kind of hold it like
that it's set on 15 so it might be a
little hard to hold all right so now I'm
good and let me show you this so this is
one of the cool things about how it
ratchets out and that's what this is one
of the things you'd use this setting for
okay so I'm gonna make sure I'm gonna go
into my table let's go from the top then
so I'm just gonna go here and I'm gonna
drive down in okay and all you have to
do is just kind of hold it okay
ratchet ratchet it out there okay so if
I put it here and if I if I ratchet this
thing out watch let me just show you
this I'm gonna go to it like a a smaller
setting so I just messed with the
setting a little bit I'm gonna put it
like at a five okay and let's see what
happens once once it starts trying to
drive it it'll ratchet out its
ratcheting out because if you need to
tighten this up in order to get it to go
so we're gonna go up to let's go to nine
[Music]
still not quite strong enough of doing
11 okay it's still not quite sunk so we
might need to and what I would normally
do on this is I'd actually take it so
that's pretty flush right there so
that's what we do for that so let's take
that back out okay so that's for the
basic screw like that okay
okay I'm gonna show you a different kind
of screw this I've showed you this
before when I built my bench it's a
coded screw and it's meant for to go
outside you'll see this four decks and
that sort of thing but the nice thing
about it being coated they drive in a
lot easier than those other sheetrock
screws and it comes with see how it's
got a star on it it actually comes with
the star bit when you buy the when you
buy the box of these it actually comes
with a new bit every time so that's so I
have lots of these bits um they're kind
of nice for that so let me just show you
real quick so you can just pick that in
here just by itself
that's one way to do it and then you can
stick it in here you kind of just hold
the top because the top doesn't have any
threads on okay so that you don't hurt
yourself and we're gonna drive it down
it's on like setting number 12 right now
let's see if it goes through not quite
pretty close okay let's do it on 13 and
so the nice thing about that setting is
it keeps you from over over sinking sea
so kind of ratchets out where you're at
so okay so that's one way to do that
another way to do it is like this but
it's a little wobbly so I'm going to
drive the thing all the way in you can
actually use a bit holder like this this
one's actually meant for driving
sheetrock screws because the nice thing
about it is it's got a sleeve on it so
it can actually yeah I don't have my bit
here but you can so you put the screw in
it's not gonna cover this one up
completely but you'll see will actually
go there and cover it up so that it'll
hold it for you when you're driving in
the screw okay okay so this is the bit
holder and it's kind of nice it's got a
sleeve on it okay
and then the next thing about this is
that you could if you were gonna put up
a bunch of sheetrock I don't have a
sheetrock so sheetrock's 1/2 inch and
you'd probably want to go into the stud
about an inch so you'd probably use like
an inch and a half screw I don't have
one on me unfortunately this one's about
3/4 I think so
so watch this that's kind of cool so
it's got a sleeve that actually comes
out on it okay see that it's got a
sleeve that's actually coming out right
there to help hold that screw right and
then you just put that in
sometimes you have to play with that a
little bit to make sure it's seated in
there good okay so we're gonna do that
so that guy's there watch this now so
you just put that here
you got that sleeve holding it for me
right pretty cool
so and then see how it went down a
little bit it kind of sunk down a little
bit I might want to adjust that so you
might play around with that if you're
doing sheet rock you don't want it to
sink through because then it'll go
through the paper and then it's not
really holding good so that's another
nice thing about that setting you would
adjust that maybe play with that a
little bit right back it off a little
bit so it's not sinking through and then
you're then you're going to town just
kind of going around and setting those
screws in okay and you can also stick I
just put a different bit in there right
I put a screwdriver bit put that star
back in so that's another way to drive
this too
I'm not going to go all the way in
because I don't want to go into my table
but I am and I've just kind of Holtz
yeah I'm holding the party with no
threads and just kind of help it's
helping get helping to get started I
could slide this down too
it's not going to cover the hole drilled
I could show you on the side of this but
everything gets kind of wobbly since
ever since this screw is kind of long
okay so I think that's that and then the
nice thing about this bit holder too if
you were gonna you can do all kind of
all kinds of these tips right and this
is so you take this this tip out stick
in you know if you're putting together
something from Ikea if you've ever done
that and it's an Allen wrench and it's
six hours later you're still cranking on
that allen wrench you can stick one of
these in you know find the right Allen
wrench that goes in here you put it in
here your tip and you're you're in
business right there look be a lot
quicker that'll speed things up so and
then this has it has Phillips head and
that's what all these are they're just
variations here let me turn around
different variations of a Philips head a
Philips head is just the one with the
plus right if you don't know what that
is right so those are just different
thicknesses that will work with
different screws and then these are just
considered flat heads okay
and I always when I pick a screw I avoid
flat heads at all possible I think if at
all possible because if you go to stick
this guy in here and you put it here and
you have a flat head that you're trying
to pull out this thing you're fighting
it all the time trying to get that out
of it okay it'll slide off and
everything with that extra cross piece
on a Philips head it stays in a lot
better let me show you another trick to
really quick I was just going to use
this tip a mistake a lot of people make
is this when you're trying to unscrew
and you want to get it out okay the
tendency is to one that you put the
drill in reverse and just and kind of
help it out but you actually want to
push down and let the screw do the work
okay so you're pushing down to make sure
that stays inside there and then just
letting the drill do the work
okay I think that I know I used to do
that when I first learned how to use it
intended to want to help the drill but
you actually want to push down and let
the screw do the work and work itself
out okay okay so remember when we did
the we put that just bolt through we
stick the bolt in we have the other
pieces here and we put that on here and
we put our locking washer on and then we
put our nut on right so let's go ahead
and do that again and then this time
we're gonna use our our drill okay so
with your drill you can get these
different adapters that will hold a
socket okay so we're gonna go ahead and
put that in I got it on thirteen so that
I can hold it again if I tried to do it
I thought the drill part I couldn't hold
it if it was I could go with lower two
but yeah
okay so let's so I got my half-inch
socket
I'm just gonna put that on there and
then I'm gonna I can go ahead and
probably even hold this hand tight for
now
and so there's what's called deep
sockets this one isn't a deep socket so
it's probably not going to quite make it
but they'll get me close can't quite get
there now all I need to do is I'm just
gonna go hold this side go from this
side
you know okay which is good because
everything is tight you see that my lock
washer is actually flat its down so so
we're good okay so no we go to remove it
come to the same thing pretty easy you
just put it in reverse and now it's just
working this way off you can see how
that would speed up putting together
furniture like if you're ever putting
together a dining table or anything a
lot of times you're using sockets and/or
wrenches and a drill will help a lot
with that so okay yeah let's show you
the show you the lighting bolt mount to
kind of the same thing that lag screw
you know technically it's a lag screw a
lot of people call this a lag bolt but
it has a point on it so it's actually a
like screw okay and that was here this
one let's go ahead and put a washer on
so it doesn't go into four I'm gonna go
here just kind of hand tighten it
started okay put this on here and I'm
gonna drive it in actually let me turn
this down so you can see it again if I
turned down that rap shit' not gonna
quite get it okay and so I keep
tightening it up a little bit more there
you go yeah set it just just where we
wanted it I wanted to show you this real
quick - I forgot all about this so
somebody had asked what my thoughts were
on this is some new product that
supposedly is you know you can use it
for a lot of different applications it
seems okay it seems a little bit hokey
in my opinion so basically I'll show you
what it does is you can use it for
multiple side sizes on there it was
about $15 I think and you could buy a
rock ratchet set a socket set for about
30 or 40 dollars so I would say just get
a ratchet set but anyway so the
principle is that
these little beads are these little
holders adjust to whatever size you're
gonna put it on right so it'll adjust
it'll go it says it goes from 1/4 inch
to 3/4 or 7 millimeter to 19 millimeter
and basically all it does is when you
push it in it just holds it so um you
know it might work for some things I
think long term it's not something I
would use because again it's around $15
anyway and I'm ratchet set for ratchet
so would give me to be double that but
that's not a whole lot of money so
basically I'm just gonna do so it does
work again just not something I would
recommend okay so I'm gonna show you how
to use some of these bits here so let's
start off with just a wood bit okay a
little wood drill bit we're gonna stick
that in here and again we're gonna move
that up to the actual drill part okay
and you just stick it here okay nice and
clean I have a piece down below that I'm
using just to protect things right okay
so that's that one okay so this is
called a hole saw I have this one too
with less teeth and I feel like this
one's does a better job okay I think
those we're a little cheap anyway so
let's go ahead and take it off the grill
size I'll put it back on the drill okay
so now here's a trick so when you're
drilling this
okay you want to see how it's got a nice
clean edge there you want to flip it
over and come from the other side if I
don't I mean there's two things that
will happen here so I thought I'm care
about this wood and I hold this tight
and they go through it'll be a clean
edge on the other side but if I don't
hold it tight it's gonna tear that out
so you want to flip it over and come
back from the other side okay okay but
it would it tore out here if I wouldn't
have done that okay if I wouldn't flip
it over like that it would have tore out
so anyway that's how you use that and
then you can sometimes it can be a bit
of a fight to get that piece back out of
there so there's a couple ways you can
pop this out the way I normally do is I
just loosen this okay and then you can
just work that up and it'll come out
okay or if you're good then you just
kind of do it lightly and work your way
back with your way back the other way
and then this won't get stuck in there
but that's one way okay okay so this is
what's called a speed bit kind of
similar to the whole I don't know that
they come out quite as clean as the
whole saw but I'm just going to show you
what those do is I want to pick out a
one inch and then put it on on the drill
again drill setting and then the best
way I've found is just to go ahead and
hold this tight right put another piece
under that I don't care about and I'm
gonna put that on
okay and then I drilled drilled through
here's another tip I wanted to show you
it's called a countersink and the nice
thing about it is when it goes in it'll
put a little it puts a little groove
right there so that your your screw
screw head will kind of just sink down
inside so let's go ahead and show what
that looks like okay see that it's got a
little hole for the head to sit in okay
here's one other kind of cool this is
kind of a luxury but it's a it's a L
adapter that if you need to reach around
a corner kind of cool you can put that
guy on there and then now you can
actually drill with around the corner so
I thought I'd show you that I you know I
only had this for one applications I
just couldn't reach and so I ended up
getting it and it was kind of cool to be
able to reach around the corner and use
that so anyway I've had to try that as
well okay so I've showed you a lot of
different ways you can use a drill so
hopefully that gives you the confidence
to go ahead and pick one up um you'll
they'll come in so handy you'll be
surprised how many different ways you
can use them besides what I showed you
there's probably other things that I've
left out but at least this gives you
should give you the confidence to
detract for yourself
and then if you get one then you know
you just get better and better at it
because you learn the settings there
pretty soon you're not even thinking
while you're just in those callers to
change bits it just happens naturally so
anyway thanks for watching and we'll see
you next week on tool tuesday and god
bless you