2 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney #howto Tool Tuesday - Crowbar
You should wear gloves when doing this type of work.
You can always learn from a bad example. 😃
These are a great addition to a tool box especially for demolition.
The smaller ones are useful for other jobs including removing molding and baseboards.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #howto
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
hey kids it's tool Tuesday and today I
want to talk to you about different
types of crowbars because I ordered
something and I ended up getting a
pallet they left the palette behind I
said aren't you gonna take the pallet
away and they said no uh okay great so
I'm gonna go ahead and take this palette
apart and use it for firewood uh but I
thought it'd be a perfect opportunity to
go ahead and show you different types of
crowbars so we'll just walk you through
the three kinds that I have there's even
other ones than these but uh these
should get you through for pretty much
everything you need so I'll walk you
through that and how each one works but
before we do that I do have a dad joke
for you so
did you hear about the raven that opened
a saloon
yeah he called it the Crowbar ah so
anyway let's get started okay so when
you're first building your tool kit
right you're of course gonna need a
hammer I didn't uh go through a tool
Tuesday on a hammer because I think it's
pretty straightforward but I'll probably
go ahead and do that too at some point
but you know you're going to get a claw
so this could work when we're removing
this these nails from here it could work
um and probably get you through but as
you get more advanced then as you're
doing this a lot you're definitely going
to want if you're doing any kind of Home
Remodeling you're definitely going to
want to invest in a crowbar it's not
that expensive and the nice thing about
it is you don't need as much strength
when you use a crowbar right because
you're using leverage instead of
strength right because if I go to use
this and I'm prying up it's a lot of me
prying it where this I got all this
leverage and I'm just right and that's
why they make these even super long for
for other type of uh Demolition and that
sort of thing so and my dog decided to
bark while I'm uh while I'm doing this
hopefully not my dog the neighbor's dog
uh so we'll see if we can get through
this anyway
so this one here is more for light duty
and for removing molding and baseboard
around your house I wouldn't normally
use it for taking apart a pallet but I'm
just showing showing you it just so you
can see because it tends to flex a
little bit on heavier jobs
okay so this one is a little heavier
Duty it's made of cast iron and so it
won't Flex as much but you're not
getting as much leverage so I'm just
showing you showing you what that looks
like when I go ahead and use that
okay and then just turn it over and then
we're going to want to go ahead and tap
out those Nails we'll just tap them out
and then we'll remove them with our
hammer
okay so now we're going to go ahead and
break out the real crowbar that I'm
going to use on a job this size so we
just go ahead and tap that in with our
Hammer to get it back up underneath
there
since we're going to use this wood for
firewood we're not really worried about
whether the wood splinters or anything
like that so we can just go ahead and be
a little bit more rough with it
so let's walk through each one
this one you know it's thinner
see how it's thinner so it's easier to
get it up underneath there
like that and get it started like this
here let me pull it back
and then once you get it up a little bit
things are kind of tough in here this
one will tend to flex a little bit more
you'll see I'll tell you what this one's
really good for
is for molding around you know molding
around your uh your baseboard this is
what you'd want to use
so I'm going to use something
tougher here for these
I'm going to use this one see it's not
as thin but it's it's not going to flex
as much
okay and then you can just pop out the
pop out the nail that way
same thing again
okay
all right let's take a look at this guy
now
go up underneath there
see it's really little effort because
I'm using all that leverage right hardly
even having to pull
or if I was using the hammer for that
that would take a lot more strength to
do that this thing is tough because it's
it doesn't have a good surface right if
this was flat it'd be much easier so I'm
kind of fighting that a little bit but
let's go ahead we'll do this one right
here so you can get it go like this and
get it started
like that you can slam it back down pull
the nail out you can pull that out there
or you can use this as well
right
get it up there again
foreign
if we can get this end done then we'll
be able to just pry that whole thing off
beautiful
okay now we can just pry the whole thing
off
and you see how you got this Gap here
like that if it's hard to get it out of
there because of this you can put
another board here like this and go like
that and it comes out a lot easier so we
got this guy here we're just going to
pop this up
like that and then now we're just going
to use
this
put that there
pry up like that right because if I try
to do this I kind of run out of room I
come back here too far so if I just put
another board like that and then slide
that up like that
comes out like butter
same thing with the hammer if all you
have is a hammer you're trying to do it
like this you can that works
but you can also do this increase your
leverage by going like that
see that how easy that is I just kind of
slopped it underneath there and used
leverage to pop it out
kind of the same thing here
I'm not even getting this really
underneath here I'm just kind of here
but I'm using Leverage
right to pop that out
all right so here's my pallets that
that's disassembled and that's just the
basics of a crowbar this is perfect for
this size of a job and then this is kind
of a medium duty and then this is really
good for baseboards and molding to get
up underneath there and it's a little
bit wider so you're able to kind of pry
it without ruining your your drywall too
so
all right so I think that's about it
thanks for watching and God bless you