This movable handle ratchet strap product solves a common problem - when the handle or ratchet system ends up in the wrong place - like too close to an object, the side of the truck bed, or over the edge of the load. This great product allows you to place the ratchet where YOU need it!
#cargo #ratchetstrap #adjustableratchetstrap
Buy your DFJ T-Shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop
Ratchet straps have taken on a life of their own. They have become so commonplace that it is difficult to think of a time when they weren’t used. Even though there are several variations, duty ratings, and sizes of ratchet straps, they all operate on the basic principle that tension is applied on straps in the middle of two attachment points. Using a ratchet device with a central threading hub allows high leverage to be applied resulting in tight straps to hold objects in place.
Some of the improvements to ratchet straps include heavier frames, molded handles for increased comfort and leverage, and devices to hold hooks on attachment points until the strap is tensioned and the hook will stay in place on its own.
Erickson Manufacturing has come out with a new product that allows you to address one other inconvenient thing that can happen when securing a load: having the ratchet positioned where it is inconvenient or will cause damage to the load (such as on the edge or corner).
We’ve tested Erickson’s Sliding Ratchet strap and found it to be very useful. After a small learning curve, sliding the ratchet to the desired position is easy. At first, it can be a bit confusing because these straps are all one piece, rather than the usual two-piece setup of the ratchet head with a short hooked strap, and a longer flat strap with a hook on one end. Instead, all the strap is threaded uniquely through the ratchet frame. Once you understand the strap path and the adjustment device, you are in business.
We were able to slide the ratchet head anywhere along the length of the strap we wanted, secure it in place, and then tighten the load. This can be really handy. The strap and hardware are very good quality, and the hook securement device is really nice as well.
Lastly, there is a Velcro® securement strap for the excess webbing after you’ve secured your load.
These straps are available from a wide range of retailers in the United States and Canada. To check them out, you can visit these links for various lengths and sizes:
https://ericksonmfg.com/product/sliding-ratchet-straps-2/
https://ericksonmfg.com/product/sliding-ratchet-straps-3/
You can also check out their information video at:
https://www.youtube.com/watch?v=aGB2cC3SiCE
We’ll put these to use around here! Our initial impressions are very good, and we expect we’ll have positive long-term experiences with them.
JUST DO IT YOURSELF!
Instagram: https://www.instagram.com/dirtfarmerj
Facebook: https://www.facebook.com/dirtfarmerjay
Hey Dirt Farmer Jay here from DirtFarmerJay.com. You know we've talked a lot about ratchet straps
over the years but we've never encountered one that's a sliding ratchet strap. What's that all
about? Check it out. Hey Dirt Farmer Jay here from DirtFarmerJay.com. Our friends at Ericsson
Manufacturing sent us these ratchet straps to give an authentic review and that's exactly what we're
going to do and tell you what we think about them. Well so far just looking in the packaging there's
a couple things that are really interesting. First of all this is called a sliding ratchet
with the promise that you can move the ratchet securement device of the ratchet head
where you need it back and forth a limited distance but enough that you can get it out
of the ways of things like on the edge of the load too close to the side of the bed of the
truck where you can't open the handle and that sort of thing. So we're going to look at that
feature. The other thing we like about this is just some of the way the handles are formed and
there's a little feature I'm just going to tell you about that helps you to keep the hooks in
place when the strap is not tightened yet so it doesn't fall off the side of the load before you
can get it tensioned and we'll look at that in a moment. Let's go and get this bad boy open and
we'll let you know how it works. All right we've gone ahead and set up a mock load for your trailer
or the back of your pickup truck or perhaps you're securing an off-road vehicle or motorcycle and
the edges of the table represent the attachment points on your trailer setup and as you can see
with this one inch strap we've gone over the top of this load and we put it over here. Now a couple
things to mention we were able to move the head this ratchet head right here anywhere we wanted
along the length of this load so we'll show you how we got there and then also one of the features
is you're able to take the excess strap with this integrated two-sided velcro system to secure that
in strap so you don't have strap trailing down behind you or getting caught in the drivetrain
or getting snapped off under tires. The job is not done until that tail end is secured as well.
Now one other thing you want to notice on these and that is what they call the caps on the end
of these hooks here so they have these little devices so that when you hook this around on a
hook on the side and you let tension come off it they tend to always to drop off like that
whereas if the cap is there and you have an attachment point like that it's going to land
like that and not drop off until you can get it tightened. So this is a nice little feature
like anything that's plastic like that it's going to last a lot longer if you keep it out of the
weather and you should do that anyway with all your straps is to keep them secured stowed very
well and keep them dry and out of the sunlight just so you don't get degradation on the strap
all the parts and all that so just take good care of your gear and it'll take care of you.
Now how did we get this from that and by the way notice one thing that's very different about this
strap than any other strap system you've probably encountered at this point it's all one piece
normally you're going to get one end that has the ratchet head a short tail here and then you end
up threading the other working end through it and and going ahead and secure it well because of that
sliding feature we just talked about of being able to position this head anywhere you want it it's
all put together in one step and let's walk you through how you set this up and secure it and
we'll just we'll imitate or follow the pattern we've already done here we go what we're going
to do is go ahead and attach this and of course if that was a d-ring or a hook side you'd use that
cap lock to hold that there so even if it got loose it wouldn't fall off now we're going to
come up here we're going to pull off this right here to allow this to open and come into the
neutral position so now we've got it to this position here and this is the magic feature
on this unit so what you're going to do is take this and you're going to pop it up and move it
from the lock position to the adjust position and this is what allows you to move this whole ratchet
head in this case let's suppose that this is the side of the bed of my truck i'm reaching around
there's pipes there's other things there or something where i don't want the ratchet here
i want it over where it's clear so how do we move the ratchet there well how we do that is by
pulling this up and moving the ratchet where you need it into position so we're going to go ahead
and i'll come around there like i'm moving to the other side of my truck now that i've got this
where i want i'm going to go ahead and move this back into position put it latch it there grab the
strap hold down that position here go ahead and close this and start your tightening now you've
got where you want and now this excess strap on the other side this loop all you need to do is
pile it up on top of the ratchet body right there now let's go ahead and tighten that around
it's two-sided velcro there you are and now you are secure now i will tell you a couple things
on this overall it seems well made the strappings nice the body of the ratchet device is reasonably
heavy duty using that loop and sliding up down is not intuitive at the beginning you'll actually
have to become familiar with it but if this is a feature that's important to you of being able to
position where the ratchet head is getting the learning curve behind you is well worth it and
our initial impressions are pretty favorable about the design the construction and what they're doing
to solve the issues of losing the hook off the end stowing the loop at the end so you don't have
an accident on the road with excess tail going down under the tires and the drivetrain all that
sort of thing is very favorable now what we're going to do is we're going to come back to you a
year from now we've got some of these in the field with some construction friends where we're having
them try these and we'll come back and tell you what our experience has been about one year from
now after these have been out in the environment being used ongoing and we'll see what kind of
feedback we have for you at that time as we just mentioned this particular product has this
securement feature here where you can take the excess strap and secure it on the body of the
ratchet here but the fact of the matter is most ratchet systems do not have that so check out this
video where we show you how to safely and securely get this strap taken care of because the job of
securing the load is not done until the tail is secured as well and while you're at it check out
this other video that we created for you out of our library that YouTube thinks is perfect for
your interest until the next time this is Dirt Farmer Jay from DirtFarmerJay.com