How To Make Epoxy Resin Coasters - EASY!

ArtResin
251 followers
4 Video Views·Oct 25, 2024
[Music]
hey guys
so one of the most commonly asked
questions we get here at art resin
is how to make coasters so we thought we
would make a video dedicated to exactly
that
how to make a coaster and we're going to
be showing you how to make coasters
using some of the more commonly used
materials
so we've got cork we've got a stone tile
we've got a wood slice we've got a piece
of glass that we're going to apply
glass mosaic tiles to and we're going to
show you a couple of different ways you
can use a silicone mold to make a
coaster
so we've got all our materials here
ready to go so let's get started
[Music]
okay so we're here with tracy and she's
going to show us how to make
a glass mosaic coaster so tracy how are
we going to do it well what i found here
is this perfect piece of glass that is
coaster size
there's two different ways that you can
make a coaster you can use artresin as a
grout
and it basically glues the shard pieces
onto it or you can actually glue down
the shard pieces
and pour the art resin over top to give
it a nice high gloss shiny finish for
this piece i'm going to use artresin as
the grout
taking my shard glasses and creating a
nice design
and letting it cure overnight so i have
already pre-measured my resin and my
hardener by volume
then i'm just gonna mix one into the
other stir for three minutes
and then i'm gonna pour it onto my glass
plate just dominate which means i'm not
gonna let it go over the sides
just to give it that nice glue for my
glass shards
so the first step is to pour
one into the other so we just need a
tiny amount so we're just using these
little shot glasses
and art resin is nice because it's a one
to one ratio by volume so you can just
eyeball it using these little glasses
here
i'm gonna stir it for three full minutes
just to make sure that
the art resin is well mixed scraping the
sides scraping the bottom
so do you know why it's important to
scrape the bottoms and the sides well if
you don't scrape the bottoms and sides
when you're mixing you could end up with
unmixed resin and hardeners stuck to the
sides
and then when you pour it out you'll end
up with sticky spots in your resin
exactly so now that my resin and
hardener are well mixed
i'm going to pour some onto my glass
so i'm going to pour just a little bit
because i don't want it running over the
edges
and you can see the resin is so nice and
thick that it's just sitting exactly
where
you're placing it yeah and as i'm
spreading it out it's going to
self-level itself out as well so you're
not going to have any of these bare
spots
yeah you can see it happening already
okay now you do see from mixing that you
created some bubbles
so i'm just going to use the torch to
get those bubbles out
now you have to be careful because the
torch is going to thin the resin and you
don't want it to still run over the edge
so all you're going to do is just get
rid of the bubbles and be done
you can see how efficiently the torch
gets rid of those bubbles it's really
it's the only tool that we use here at
the studio
right oh absolutely it works amazing
so now the fun part we get to put the
tiles on so tracy do you have an idea
of what uh design you have um i do
actually i just picked i'm going to do
just a sun some i'm going to put some
sunshine on my coaster
so i just picked some yellows and some
oranges and i'm just going to do a very
very simple design
perfect okay so let's get started
so because we're not bringing the resin
right over the sides there's no need to
prop it up
right on a stand normally if you're
going to let the resin drip over the
sides we'd prop it up on something
absolutely and that's the reason why
otherwise you're going to have your
piece right stuck to your table yeah
okay and art resin has an approximate 45
minute work time
so you have lots of time to just move
around your pieces if you don't like
where it's going you can just move it
around to somewhere else
so we're using a piece of mirror but you
could
use this uh same process equally well on
a piece of metal
or on just a piece of glass right
absolutely same thing
same process so you don't have to use
glass shards right you could use
um rocks or you could use like beer caps
or anything that you want to
absolutely anything that you have just
even laying around
okay that's it it looks perfect so
what's next tracy
i'm going to cover it to protect it from
dust while it's curing just to make sure
there's no dust that falls into the
piece
tomorrow it will be cured hard to the
touch and in 72 hours it's going to be a
full cure
perfect that's awesome thanks tracy
thanks joanne
so i've got tracy's mosaic tile coaster
here
now tracy must have been so inspired by
her sunshine design that she took off
and went to maui this week so
i'm revealing her coaster it looks
amazing she did a fantastic job
and a lot of people wonder because it is
tile and it does have the texture
can you use it as a coaster
sure can
so here's a quick tip about warming your
resin in a water bath
now if you've watched any of our videos
before you know that we recommend giving
your resin a water bath if for example
the temperature is cold outside or your
resin is cold
cold resin may have a thicker
consistency
it may have micro bubbles so if that's
the case then a water bath can help to
bring it up to temperature
and restore that beautiful art resin
consistency
now one of the added advantages of
warming up your resin is that it
greatly reduces the number of bubbles in
your resin
so that can be a huge advantage when
you're pouring into a silicone mold
now you know that we always recommend
pouring layers of 1 8 of an inch and if
you pour any thicker than that
the bubbles don't have a chance to rise
to the top to get torched out
so if you're pouring a thicker layer of
warmed resin into your silicone mold
you'll see that you'll have far less
bubbles to start with
so next time you're pouring into a
silicone mold try warming your resin
first
and see if you can notice the difference
okay so we're here with tara and tara's
going to show us how to embed
objects in silicone molds to make
coasters
so we've got some rocks here we've got
some pebbles and we're going to show you
a couple of different techniques
so should we get started we should
awesome all right so we have equal parts
of resin and hardner
um anything we warmed it up before in a
warm water bath to try and minimize some
of those bubbles
and we're gonna go ahead and mix them
together
okay then we're going to take our mixing
stick
and go ahead and mix it and we're going
to mix slowly
for three minutes yeah and it's
important to mix slowly because the
faster you mix the resin the more air
you're going to incorporate which means
more bubbles
so especially when you're pouring into a
mold you definitely don't want
bubbles so we want to make sure that the
bottom
and the sides are scraped properly so
every little bit of resin and hardener
gets mixed in
so it cures properly all right i think
that is
all mixed together awesome so now we're
ready to pour
so i'm just gonna give you some gloves
so we're gonna make three coasters today
and we're gonna pour a little bit in
each one yeah now we are pouring again
thicker than our usual eighth of an inch
but because we've warmed the resin up
that allows us to pour
thicker than the usual eighth of an inch
good so what are we going to start with
first i think we'll start with the
more natural looking rocks awesome okay
so i'm just going to go ahead and take a
handful
these are so pretty they're like those
river pebbles right definitely
you can get them at any um craft store
i'm just going to go ahead and drop them
in
slowly one at a time maybe yeah so
pretty
and there's not really any like right or
wrong
to how you place them just keep in mind
though they are sinking to the bottom
because they're rocks and they're heavy
but in fact when this is cured and we
pop it out the bottom is going to be the
top right
so just keep that in mind that looks
great
okay and what's next uh next we'll go
with the um
the purple rocks they're a little bit
smaller like little pebbles i guess
right
yeah yeah definitely and we are using
stones and pebbles but you can use like
a variety of objects right you can use
anything you've got
beads or um beer caps a lot of people
use beer caps
whatever you think some turquoise
so it's going to take about 24 hours for
these to cure
and you can pop them out of the molds as
soon as they're dry to the touch
the earlier you pop them out the easier
it is to release them
there we go i think that looks good
awesome so now for the third one
we just want to show you a little bit of
a different technique when you're
embedding
as i just said some items are really
heavy and they can sink down to the
bottom
or the top so what you can do if you
want to
get a really thick coat is you can pour
in layers what you do is you pour your
first layer
and then you let it sit for three hours
three to five hours it's going to start
to thicken up
and once it's thick you can then go
ahead and add your next
layer of rocks or stones or whatever
you're embedding and then pour your next
layer of resin on
and because the thickened resin will be
sticky at that point
then the two layers are going to bond
together so there's no need to sand or
anything like that so that's a really
handy tip if you want to get a thick
coat to pour in layers perfect
okay so i'm just going to go ahead and
take some of the turquoise on and put
them in the bottom
[Music]
there we go that's good awesome so then
we're going to wait
about three hours or so we're going to
come back add some more rocks pour
another resin layer
sounds good and we'll be able to see the
difference tomorrow so
we'll come back in a few hours yes okay
so it's been three hours
our resin has thickened up and we're
ready for our second layer
perfect so we're going to take some
purple rocks this time
and just sprinkle a few of them right
there
around just so we can see the difference
there we go i think that looks great
yeah perfect and we've got our resin
already mixed up and ready to go so
we'll just pour our
next layer on and really it doesn't
matter you can put the resin first
and then the stones or as we did the
stones first and then the resin
yeah it doesn't really matter that's
good so we'll just wait 24 hours and
we'll show you what they look like
tomorrow
thanks tara thank you joanne
so it's been 24 hours and tara and i are
here to reveal our coasters
all right let's take a look yes all
right let's start with the rocks
oh look at that awesome oh i love it oh
me too that's fantastic it looks so good
so you can see even though the rocks did
sink to the bottom they're big enough
right that there's not too much empty
space up here at the top it looks really
good
yeah it does very nice all right let's
take a look at the next one
so next we have our little pebbles and
if you remember we only did one layer
of these pebbles yeah it looks great too
but you can see the pebbles sunk down to
the bottom so there's quite a gap
uh there and then for our last one
we uh did two layers to avoid the having
that gap right so
let's compare and see how that looks
look at that yeah awesome
it looks a lot fuller compared to this
one which has that kind of empty space
in the top here
so two different options um to do
coasters either
doing it in layers or doing it in one
shot like this
great thanks so much tara thanks john
[Music]
so just a quick side note when you're
working with silicone molds and resin
one of the reasons why silicone molds
work so perfectly with resin is the
resin doesn't stick to silicone
so usually when you're unmolding they'll
just pop right out of the mold but
sometimes as the mold
is getting older and getting used more
often it starts to break down
so there are a few suggestions to make
unmolding a little bit easier and
prevent the resin from sticking
one is to pop the mold in the freezer
after the 24 hour mark
and let it get really cold and that can
help release
the resin another one is the opposite to
put it in a hot water bath and that kind
of softens the resin up and makes it a
little easier
and releases it from the side of the
mold sometimes the molds just eventually
will break down and need to be replaced
so
just something to be aware of when
you're working with silicone molds in
resin
so i'm here with jasmine and we're going
to show you how to make coasters using
silicone molds
and alcohol ink so silicone molds you
can get them in so many different shapes
and sizes but the thing to remember
is it's best to look for a mold that has
a glossy interior
a glossy interior is going to give you a
glossy finish on your resin
now if you have a mold that you love and
it's got a matte finish on the inside
don't worry we're going to show you a
little trick
to get that matte finish back up to the
art resin glossy finish we all know and
love
okay jasmine let's get started okay so
you're gonna take your equal parts
resin and hardener as always and mix
them together
for this project we're going to pour the
resin a little bit thicker so
we want to make sure that we're stirring
it nice and smoothly so we're not
folding a lot of air
into it so we don't get as many bubbles
perfect
all right so we're going to put a nice
bit into each mold right so normally
we tell you don't pour thicker than an
eighth of an inch when pouring resin
because
bubbles will get trapped in the resin
and won't have a chance to rise up to
the surface
now we're going to kind of bend the
rules a little bit pouring into a mold
and this is when using
warmed resin really really comes in
handy a warm water bath will thin out
the resin
there will be way less bubbles and that
actually enables you to pour
a thicker layer right that's right
and now for the fun part we're gonna put
in our alcohol ink
so jasmine do you have a certain color
scheme in mind or a plan
yeah well you can really be creative in
this part but i think i'm gonna be using
some blue
some green and some white for this one
all right and we can get started
i'm going to start with white you want
to make sure that you pick an opaque
color like white
for your petri dishes so that the design
really shows up when you flip it over
perfect so you can be really creative
here right
with you can put in a lot or a little
i'm just going to put a little bit so
that we can really see how the resin
acts with the ink
perfect so we're using alcohol ink do
you think you could get the same effect
using a different kind of ink like
acrylic ink or
no i don't think you get the same effect
with that because the alcohol
in this kind of ink actually denatures
the resin
as it goes down so that's how you get
the cool effects from all right you get
those cool like tentacles
yeah that's right that wouldn't happen
with acrylic okay perfect
all right i'm looking at this and i
think it could really use a little bit
of yellow and
you know that's half the fun about this
is really getting to like experiment and
go along
absolutely this one has a lot of
negative space but i find that's really
nice for really seeing the patterns
oh that's pretty yeah it looks good
it's so magical watching the the ink as
it descends into the resin right it
makes the coolest pattern you never know
what it's going to do
yeah all right i think that looks pretty
good so i'm going to call this one
finished
yeah it looks awesome so let's move on
to the next one yeah absolutely
um here i'm going to take some purple
and some pink for this one
and we're going to do something a little
bit different and i have this
old white bottle which just has a little
bit of white ink in the bottom
so i'm going to open it up and we're
going to actually mix the inks together
before we put them in
that's a great idea yeah and i think i'm
just going to use maybe a drop or two
if you don't have an old white bottle of
course you can
really put it in anything that you think
you can squeeze the ink out of later
put the cap back on and shake it up and
then we'll really have a nice light pink
okay so we can start with this now that
we've mixed this white into the pink it
actually becomes
an opaque color so we can use it as our
base awesome
that's such a good point jasmine you can
like totally mix your own
custom colors right yeah yeah it's
really fun it makes it your own
yeah the white seems to like drive the
ink down doesn't it create those kind of
little those feelers right
absolutely yeah all right now i'm just
going on some of our regular pink
and you know just like the other one put
it wherever
your heart wants to put it yeah there's
like no right or wrong in this is there
no absolutely it's all about you know
experimenting with these
and you never really know what it's
going to look like when you turn it over
the next day
and i think this one deserves some gold
yes pink and gold it's really nice
and so you said the gold is also an
opaque right yeah so this
is also an opaque so you will see it
kind of like shoot down with all the
other colors
so it's going to look great
all right so this one has a little bit
less negative space but i still think
we're gonna look fabulous yeah it looks
awesome
okay so let's move on to coaster number
three absolutely
so for this one i'm going to show you
how you can kind of move the resin
around with a stir stick and kind of
put in some movement if you'd like oh
cool so it's kind of like a marbling
kind of idea
yeah yeah yeah and then i think i'm just
gonna do some yellow
and some orange and pink
it's so cool i can see the ink dropping
on the first one that we did already
it's pretty amazing so it's really neat
there's just a lot of movement in these
pieces which is what i really like about
them yes
yeah if you're the kind of artist who
likes a lot of control then i think this
is a good exercise
you don't really have a lot of control
to you with this yeah absolutely
i think that's really an interesting
aspect to it all right so we got some
color floating in there not too much and
then i'm just gonna take
the end of my stir stick here you can
really just
gently pull it around so that you kind
of get like
mixing really drag it around however you
like i
love how this looks you can poke some
down if you like
yeah right you know use a little bit of
pressure and then it'll go in
or you can just drag it right on top
super cool it's really nice for
you know really mixing the colors yeah
so we often get asked here at artresin
when you can demold your resin from the
silicone mold
so art resin is dry to the touch of the
24 hour mark
you can certainly remove it before the
24 hour mark
as soon as it's dry to the touch it
depends on how warm your room is it
might dry a little faster but definitely
remove it before the 24 hour mark before
the resin is fully cured well it's still
pretty flexible
and it'll be a lot easier to unmold yeah
i find i don't rip as many molds
yeah yeah yeah and that's a 0.2 silicone
molds they will all eventually break
down
so you want to get a good quality mold
it'll last longer but they all will
eventually break down
and need replacing you want to try the
next one i was hoping you'd ask
all right i got a pair of gloves here
so i think i'm going to do pink and gold
and white
oh that would be pretty and i'm going to
try and do a pattern i think
so this square mold actually has a matte
interior which is going to give a matte
finish
um to the resin but when we de-mold it
i'm going to show you how you can fix it
and bring the gloss back
okay so we're all done now we've got
four very different looks here so we'll
see how they look tomorrow now
normally at this stage when you're done
working with resin the next step would
be to torch it but we're not going to do
that
with alcohol ink right yeah alcohol is
super flammable so
if you try and torch this you'll let
your thing on fire which
is really insane it's not good another
great reason for using the warmed resin
it reduces the bubbles right from the
get-go so
actually torching kind of isn't even
necessary i don't really even see any
bubbles in there so
pretty clear yeah yeah awesome so we'll
see how they look tomorrow
thanks jasmine yeah thanks
[Music]
so we're back for the big reveal jasmine
you wanna
yeah absolutely unmold these guys so
they've been
sitting in the molds for less than 24
hours oh
that's so pretty really well yeah that
looks amazing
this one had a lot of like negative
space in it yeah it's so pretty
all that negative space really lets you
um yeah see the problem you know the
alcohol length i actually really like
this one yeah beautiful
all right let's see how the next one
turned out
that one looks so cool too yeah it does
i love all those variations of pink it's
beautiful yeah
and mixed up really well yeah nicely
done yeah i just really like how this
one turned out
now this has been less than 24 hours
since we poured this yesterday right
so you'll notice that it's like still a
little bit flexible because it's
you know entirely made of resin it
doesn't have some sort of base on it
right
so over time this will just keep getting
harder and harder in the next couple
days but in that mean time you want to
make sure that you're laying it
flat on the table and not kind of on
something because then you might get a
little bit of a kink in there
right so yeah you just leave it nice and
flat for a couple days and you'll have a
really nice and hard one yeah like this
one here
it wasn't last week it's absolutely rock
hard now you can't bend it but it
definitely was pliable
when i first de-molded it yeah exactly
great
good so i am going to reveal the next
one
so these two came out of the mold quite
easily this one
if you'll notice i'll just pop it out it
actually
stuck to the mold at the corner here
see and i think one of the reasons why
is that it was filled up quite
quite high almost to the top and
the edge of it was right on this kind of
weak spot right
at the neck or the collar you know the
seam here um
which is a bit weak and it ripped so i
mean this can happen even on the best
quality molds eventually all silicone
molds will break down as i told you so
if this does happen it's unfortunate for
the mold
but you can just sand off these little
bits of residue here right and then
you'll
you'll never know you can sand it off
and then just use a little bit of resin
to touch it up to bring the gloss back
but yeah this one looks amazing too i
love your marbling technique here it
looks so good
yeah that turned out really well
actually yeah beautiful colors here
jasmine did a great job on this one
okay so our last one now so this one you
remember
was in a matte mold so ah that's cool
but you can see
it's got a frosted finish on it from the
mat right it's not as glossy as these
ones that were in the
mold with glossy interior so i told you
when i poured it that i was going to
show you a little trick to bring the
gloss back
okay so i'm just going to get my gloves
on
so you want to mix up a very small
amount of art resin
and remember there's no minimum amount
required when you're mixing our resin as
long as you stick to the one to one
ratio you can mix up a minute amount
which is awesome
so we just got a little shot glass here
with a tiny amount
you want a disposable foam brush these
work amazingly well
you can use your gloved hand too but i
prefer the brush because it's a little
neater
and here's my little stand
okay so what we're going to do is just
brush on a really really
thin coat and immediately
immediately you can see how the cloudy
turns
clear so it is one extra step but you
know what if you have a favorite mold at
home that's matte and you want to use it
this is an excellent way
to make it work that's it so we'll just
let that dry overnight and
that'll be perfect that's really cool
yeah you can see inside of it now yeah
exactly
awesome well you did an amazing job
jasmine thank you so much for coming
on to show us how to make coasters using
silicone molds and
alcohol ink yeah they turned out
fantastic yeah it was really fun thanks
for having me yeah you're welcome
hey guys a quick side note about taping
off the bottom of your piece
now taping off the bottom of any piece
whether it's a coaster or a piece of
artwork is really important thing to do
it makes life so much easier because of
drips
as the resin spills over the side it'll
catch on the bottom
of your piece and if you don't have tape
you're going to have to sand off those
drips after they cured which is a whole
lot of extra work
what i like to do is tape off the bottom
and then
when the resin is cured you can rip the
tape off
and the drips right along with it so i
just want to show you a couple little
handy
tips for taping so we like to use
masking tape when we tape off this is
one by 3m
if you use painters tape or masking tape
just make sure you get a really good
quality one
there are really cheap painters tapes
out there but they don't have very good
stick
they can be really porous and absorb the
resin so it really
makes a difference to get a good quality
painters tape so
i've got this 3m tape here okay so
now for taping off a square it's really
straightforward obviously
so i just what i do is line it up along
the edge
and i let it extend past the sides
and then i just kind of do a miter cut
with my with my thumb here i'll just
put my thumbnail on the very corner of
the edge
and then rip the tape on kind of an
angle here like that
okay so and then i just go around
each edge like that
just overlapping and
angling it off this one here too you see
when you do the second one
it's overlapped and you've got a nice
clean edge there so i'll do this one
here
and then i really i mean you can use
like something to kind of burnish it
down i just like to use my
my fingers here just to make sure i get
a really nice bond there between the
tape and my piece
okay you can even use your thumb just to
press it down
and there we go it's all ready to resin
okay so squares obviously are really
easy
for circles for a circular piece like
this or in a regular
shape piece if you have like a
charcuterie board it can be a little
more challenging but i've got a way that
i like to do it and it goes
it goes pretty quickly so what i do is i
have thin little strips i rip off thin
little strips about this size
and i just take the straight edge and i
line it up along the edge of my piece
here
okay and so i've got a little piece
that's um
that's overlapping and again i just use
my thumb to hold it down and i just
rip and i'll just go around with these
thin little strips
[Music]
okay and i just just rip off the edges
and i just go around overlapping
okay it's a little tedious but this is
the
easiest way i've found to do it
okay so you get the idea i just keep
overlapping and eventually you end up
with kind of almost a nautilus sort of
pattern like that
okay and you can see here i've got a
couple drips that caught
on this piece now a handy thing when you
are removing the tape is to wait until
the resin is dry to the touch
and that can be well before the 24 hour
mark in fact you can pull it off as
early as
the 12 hour mark depending on how warm
your your room is and how quickly the
resin has dried
now the reason you want to pull it off
early is that because
if you wait until after the 24 hour mark
when that resin has fully cured it's
going to have really bonded
and it's going to be really hard to pull
off so this one here has been sitting
for
over a week or so and i was trying to
pull it off earlier and
i'm going to have to sand this off those
t those drips there
that the tape is caught they've really
bonded to the resin on the side and the
tape is just
like ripping without really pulling
without really pulling the drips off the
drips are kind of staying on there so
i'm probably going to end up having to
either use a blade to pop them off or
sanding it off and you can see on this
one as well
the resin has has run down the sides and
really really cured all the way around
the tape so
if i had pulled this off early it would
have just ripped right off but now the
resin has really really cured and it's
going to be tough so
always remove your tape as soon as your
resin is dry to the touch
and that's it that's your quick tip on
taping and removing your tape from your
resin piece
okay we're gonna do the rest of our
coasters now and i've got my cork
coasters my stone tiles and my wood
slices now the reason i grouped these
ones together is because i want to do a
little experiment
these are all natural objects which
means they're more porous
than say glass or mirror or metal and
being more porous means that they can
absorb the resin which
could end up making them darker so an
easy way to test for this
is by testing first with a little bit of
water just drop a little bit of water
stay on your wood slice and if it
immediately goes dark you know it's
probably going to absorb the resin and
it's probably going to end up darker as
well
so what you can do to lessen the
darkening is to seal first
so you can use a spray sealant like this
krylon spray
or you know i really prefer actually
using a brush on sealant like white glue
or mod podge and you can apply it with
a disposable foam brush or even your
gloved hands and the reason i prefer
brush on sealant is because these
natural objects have a lot of nooks and
crannies
in the stone and the wood and you can
really use the brush or your gloved hand
to work in the ceiling into those nooks
and crannies
and the most important thing is to
choose a sealant that dries clear
and is appropriate for the material
you're sealing so earlier today i sealed
some of these coasters
i used a brush on sealant for the wood
and i left this one unsealed
i used a brush on sealant for the stone
tile and i left this one unsealed
and then for the corks i sealed one of
them with spray sealant
i sealed this one here with a brush on
sealant and i left this one unsealed
so we're going to compare and see which
one works best okay so let's start with
the cork
so i've got all of my tools here ready
to go i've got my dust cover i have my
torch i've got a toothpick for getting
little bits of dust out
i've got a spreader for doming and most
importantly i've got my art resin
equal amounts of resin and hardener
stirred for three minutes and i scraped
the bottoms and the sides as i stirred
okay so i'm ready to pour so first i'm
pouring on to the piece of cork that has
the brush on sealant
as i said i'm not going to let it run
over the sides i'm just going to do
a little doming technique here with this
little spatula these are so handy you
can use a little plastic takeout knife
too
and there's no special skill involved in
doming all you need is a steady hand
and just work slowly okay so we're just
going to nudge
the resin right up to the edge
without letting it go over art resin has
a beautiful
thick consistency and it lets you just
put it exactly where you want it to go
and it won't move
and then next i'm going to pour on the
coaster that had the spray sealant
[Music]
when you do this you don't have to tape
off the bottom
you can if you want for a little extra
insurance but when you get good at
doming you don't have to
and our last one is the coaster that had
no sealant on it at all it's just raw
cork
so i'm doming all of these but as i said
you could tape off the bottom
and let it run over the side if you
wanted to
i like the idea of doming because it's
one last step
okay we'll just give these a quick torch
to get rid of any bubbles
got our artist torch here just a really
quick pass
it doesn't need much
okay and then of course we have our
toothpick candy we're gonna look in the
light and make sure there's no
bubbles that i missed or bits of dust
oh actually there's one little thing
there a bit of dust there we go got it
perfect so we're just gonna cover these
up in 24 hours they're gonna be hard to
the touch
and we'll see how they look
okay so now we've got our stone tiles
okay so
remember this one i sealed with the
brush on sealant this one has no sealant
at all it's totally raw so we'll see
if it makes a difference with the resin
so i'm pouring on
the coaster that has the sealant here
and then i'm just going to actually let
it go over the sides on this one it's a
little bit
harder to dome on sort of an uneven
surface like this
i've taped off the bottom with painters
tape
okay and i'm just actually going to use
my gloved hand
just to run the resin along the edges
you can even
dip your finger in the resin and then
just
run it along the edge here
[Music]
and next we'll do our coaster that has
no sealant on it this is raw stone
so when it cures we'll see if there's
any difference in the color
and again i'm going to let this one run
over the edges
so taping the bottom is really handy
it's going to catch all the drips
and then the next day when the resins
dry to the touch you can just rip the
tape off and rip
all the drips off along with it so
okay so now i've poured i'm just gonna
use my torch to get rid of any bubbles
okay so again just a light pass with a
torch
okay and then grab the toothpick
and just take a look in the light to
make sure there's no bubbles or
dust that i've missed it's looking
pretty good
there's one tiny little bubble there i'm
just gonna pop it
there we go perfect so you can already
see
this coaster is actually going a little
bit darker the one that didn't have any
sealant on it so we'll see how it looks
tomorrow after it's dry after 24
hours i'm just going to cover it now to
protect it from dust
and we'll see how it looks tomorrow okay
so now we're going to resin our wood
slices now if you remember
this one here had the brush on sealant
this one is raw wood okay so
one of the other reasons why i really
like applying a sealant especially with
wood is that wood can be notorious for
off-gassing and what that means is
it releases the trapped air because it's
an organic material
it releases its trapped air into the
resin in the form of bubbles
so sealing just helps to provide a
barrier it creates a barrier to prevent
that air from
off gassing so i always like sealing all
right there's a lot of different reasons
why
wood can off gas but it can be the age
of the wood it could be how dry it is it
could be
the type of wood so sealing is always
the best
practice okay so now i'm going to pour
and i'm just going to dome this one
again
again if you wanted to do the sides
absolutely no problem you can just tape
off the bottom
just get a good quality painters tape
you want a good quality one that has
good stick
okay and if you do want to cover the
sides as well you can use again a
disposable foam brush but i just like
using my
gloved finger so now i'm going to pour
on the piece that has no sealant the raw
wood
[Music]
you can already see there's a difference
here
in color the one with no sealant
is immediately going darker
[Music]
okay so let's grab my torch here and
give us a quick
torching to get rid of those bubbles
okay and toothpick check
that one actually looks good oh there's
a little bit of a dust in this one here
okay awesome so we'll cover it up and
we'll see how they look tomorrow
so our coasters have cured and i'm ready
for the reveal
so we'll start with our wood if you
remember this one had
the sealant on it it kept its color it's
still quite pale
this one here had no sealant so the
resin really absorbed and actually i
think it looks quite beautiful the wood
grain is just glowing
but you want to be careful and test
first so you know exactly what to expect
wood is all different it depends on the
type of wood it depends on how dry it is
you might not get this kind of glow this
one for example here i sealed it on the
front so it kept its nice light color
but you can see on the back where the
resin seeped
over it went really really dark so all
was best to test first so you know
exactly
what to expect same here with our stone
coasters or stone tiles this one had the
sealant so it kept this
nice bright color and the one with no
sealant
absorbed and went a little bit darker so
just good to have options
and now the cork and this one actually
surprised me the results here
this was the cork coaster that had no
sealant
it looks beautiful this one here was the
darkest one of all and this one had the
brush on sealant so the cork
really really absorbed that brush on
sealant and ended up becoming really
dark
and the one here that the spray sealant
i actually wasn't even sure if it would
work
and it totally did this one is the
lightest one of them all so
just an important reminder all was
always best to test first so you know
exactly what to expect when you're
resting
so that's it thanks so much for joining
us as we showed you step by step how to
resin a coaster
we hope that you feel informed and
inspired enough to try making a coaster
of your own
and as always be creative and have fun
