World's First 2JZ Swapped Tesla | SEMA 2024 | Part 3

Screw Driver
87 followers
#car#automobile#business#consulting #salesagent
World's First 2JZ Swapped Tesla | SEMA 2024
https://www.copart.com/doRegistration...
So I want to take a video before the sun sets. The motor's in, it's looking good.
What's going on YouTube? You read the description correctly. This is the
world's first 2JZ swap Tesla and we're going to be debuting it at SEMA.
Now the whole purpose of this build is to show that regular people can do
extraordinary things in their garage. So I partnered up
with Copart to build this amazing thing. Now it's hard to believe
but I only started this about a month and a half ago and if you look behind me
as you can tell we still got a long ways to go. The purpose of this build is to
actually build something amazing in a regular garage,
with a regular car which is a Tesla Model 3, with regular tools which are
basically my fancy tools from Harbor Freight, and doing all this
in 60 days to prove that if you have the drive and the motivation
you can do anything you can put your mind to. And that's what Copart's helping
me with with building this thing. So today is
going to be more of a recap video. I'm going to show you exactly what I've done
so far and then also what we have planned going
on and more importantly showing you the first time we drop
the 2JZ into the vehicle. So since our last video this is the current state
of the Tesla. We got our body kit on completely. We've basically panel bonded
all the panels together. We got the side skirts completely
bolted on. I got the doors on functioning. I got the rear quarter panels. Now
remember there was no quarter panels for this car. We had to make them. This is the
obviously the second door or the back door and more importantly I couldn't
weld these because the door is aluminum and the actual quarter panel is steel.
So we actually had to use panel bond. So if you get up close and you see we
actually glued the two panels together and if you rock it you literally shake
the car. That's how solid it is and it's kind of funny when we tell
people that your car is actually glued together
not really bolted. There's a few spot welds as you can see right here
but you can see the glue literally coming out right here and this is how
they hold your car together. But so far it's looking great. The next
thing we're going to be doing is actually working on the suspension which
I'll take you over here. And so I have to give a huge shout out
to Max Speeding Rods. They gave me an amazing setup of not only
control arms, actual adjustable so I can do the cambering and everything else.
They gave me the rods for the 2JZ because we're using the Lexus motor out
of the IS300 and it doesn't really have good rods
that if you start putting boost to it you're going to blow it up.
We got our intercooler. Oh our fancy steering wheel. This is going to be our
probably just for SEMA. I don't think we're going to actually use it for
racing but it looks very cool. So you know we got all this stuff. We're
just waiting for the coilovers to come in and then we're going to go ahead and
start lowering the car. We're going to lower
it about four and a half inches. Now this is the way it sits without the
battery and just to kind of give you guys a heads up you can see that wheel
gap is absolutely ridiculous. You know because
without all that weight this thing's going to be very light
because once you put the 2JZ, the fuel cell and everything else in it
it's going to drop down a little bit but we still have to lower it quite a bit to
make it rideable. Now if we go over here to the back I've
already started installing the wings. So we drilled the holes out. I'm probably
going to leave that one for the actual debut. We got the back out. Now
what I'm going to be doing is cutting this back section out so we can
install our rear mounted radiator. So this will be out probably by the next
video. I'm going to have a radiator installed there
and do some other fun stuff. Right now the bumper pretty much we just put
the seam sealer and everything else on there. I'm going to
sand this primer and then we're going to take it to Purple Flora Wraps, my buddy
here in Vegas. Shout out Miguel. We're going to go ahead and wrap this
thing along with the rest of the car which I'm super excited about.
I got some really cool wheels coming up here soon. I don't want to give it away
but they're really really awesome. But as you
could see everything has gone together pretty nicely.
Oh and you're going to love this. Since it's a Tesla we got to show off with our
little lightning bolts which is absolutely hilarious. Now there's
going to be all kinds of little easter eggs like this
all over the car to make people laugh when we go to SEMA.
So one of the things I made a big joke about is this is the only Tesla
with testicles. So this thing will have enough horsepower probably around 650 to
700 to drift through these corners pretty
quickly. I'll show you some of the other parts we got
but this thing is going to be awesome. Now we finished up all the stuff for the
roll cage and as you can see the gussets right here also have little lightning
bolts on them. We're going to be pinning the inside. I'm
probably going to do this in metallic gold
to offset our wrap. We can see the seam sealer here
but there's the front of the car. It's looking good. That's our hood. Everything
fits correctly underneath there. Once I get the motor
mounted completely I'll show you guys that a little bit more here in the
second video but everything else is looking really good.
So I'm also going to show you a few other things we're going to be installing.
We're going to wait for the suspension for next video because we're waiting for
the coilovers to come in the mail. Once they do next video will all be
about slamming it to the ground getting it ready
for SEMA. We got our amazing lightning bolt e-brake shifter which is awesome. I
love this thing. I don't know if we're actually going to
paint this or leave it the anodized look but it looks very very cool
and this is our Collins adapter plate for the transmission.
Now I'm going to show you why all this is going to make sense here in a minute
because we have the 2JZ in there but we also have
this manual transmission out of a Nissan 370Z.
Now if we do it correctly from the bell housing all the way here to the middle
is 40 inches which is like right there at the end. Once I put the seat down I'll
have a little video clip showing you where I'm sitting at.
It's too far away. It's too far behind me. I'll be literally shifting behind
myself when I'm working at. So what we're going to do is we're
actually going to get a short shifter that's going to go from here bring the
shifter in six inches to where it's sitting right up above here
and hopefully that will make it where I can go ahead and actually line this up
because if you watch the other video I probably
in putting this one I'm pushing the motor forward about an inch or two just
to bring it open so right there where that shifter hole
opening is is where the actual shifter is going to come through.
So I'll have enough space for that my two racing seats and with my e-brake
which is awesome. Plus we are going to be using the
original OEM Tesla dash with the screen. The screen
hopefully will give us the data we need for
RPMs everything else which should look pretty cool. So this is where we're at at
the moment. I got the motor hanging here. I took
the crossmember out of the Lexus IS300 and we're actually going to
weld it to the crossmember of the actual Tesla. So right now what I'm doing is
I'm going to line this up and see how far it is from the firewall
how everything fits make sure we have enough clearance for the
actual hood. So once I have all these measurements I can go ahead and tack
the actual crossmember down pull it out weld it all up make sure it's all
gusseted strong to go and then we'll go ahead add the transmission and we'll
build the tunnel. Everything looks kind of balanced.
If you go up inside here you can see we have about
an inch or so inch and a half on this side inch and a half from the motor mount
on that side. We got plenty of space between the hood
and the actual top so we can put the intake and the turbo so we
shouldn't have any issues. But everything is looking good all I
have to do now is once we bolt this in I have to figure out the spacing for the
actual adapter plate along with the transmission.
The transmission is about 40 inches so if I do my math right
that should literally put us right here where this actual shifter plate is. So
once I measure this up hopefully I cut this one time and it'll look good and
then we're going to actually put some tubular bars from the back all the
way up to the front and put sheet metal around it.
Kind of looks cool so this way I can bolt on my really cool lightning bolt
shifter which I'll show you guys here in a little bit
and some other stuff to go along with our awesome lightning bolts that are here
on the actual roll cage. But it's definitely moving forward like I
said we got literally a week and a half before SEMA
so we got to get crunch time so it'll be 16 hour days. So I can't believe I got
all this stuff done inside my garage at my house. Now it's
extremely rewarding the fact that I'm able to do this stuff it kind of reminds
me when I was back in high school and I was just working on my cars but
I know a lot of people are always saying oh you can't do stuff like this you need
lifts you need you know all this fabricating tools you
need all this stuff and like I said if you can look around me
it's not a very sophisticated build up. You know the most
I guess cool thing I got is my big Harbor Freight toolbox.
Besides that we're talking basic hand tools. I didn't bring my English wheel, my
bandsaw, none of that stuff. I've been literally using
a die grinder a cutting wheel and some other tools just to make it happen
but that was like I said the purpose of this build is to show people that if you
have the determination and just want to learn and see how if
you can do it I think this is a great way to get started in the automotive
industry. So if you're looking at maybe buying a
few cars or a project definitely check out Copart Select. They're
the partner of this build and I can't thank them enough because
without them I wouldn't have been able to come up with something crazy like
this and the fact that this is their very
first SEMA is huge because you know you've seen all over YouTube
oh I built a car from you know Copart and blah blah blah
and out of all the YouTubers I was the one they picked to actually build
something crazy like this which I truly feel blessed and I'm sure
they're going to be blown away once they see the finished product
and hopefully you guys as well but if you go down there to Copart you don't
have to buy wrecked cars or salvage cars they're much more
they're offering clean title cars that you can literally hop in and drive away
repos some forfeitures some other great cars that you can get into so whether
you're looking for something like crazy like this or a daily driver you
can go to Copart Select and purchase some of these things and
the cool thing is is with some of the cars you don't have to have a dealer's
license Copart Select in certain states is open
to pretty much everybody so definitely check them out now before
I get into the actual video of me dropping in the 2JZ and everything else
I want to get your feedback because you know I love doing builds like this and I
love showing off crazy stuff like this but
unfortunately the videos are not getting the views
I do a video talking about just something random about how car prices
gone up 10% and I'll get 200-300,000 views where
I'm doing something absolutely insane by cutting a Tesla in half
and making it a drift roadster and it gets maybe 5,000 views so I need your
guys's help please share this with friends family
other people that are automotive enthusiasts you know I really don't ask
of much I obviously I don't sell anything on my channel
you know all this stuff I'm doing just because I enjoy it and I love it
I love teaching people about buying cars about running your dealerships
your rental car companies opening up a shop I want to teach you guys
about fabrication because I don't know if you guys know this but I'm going to
take you inside like I said this is my house
and this is what I'm building right now so it's not only a car for SEMA
because I still got my 6x6 but I have this which is going to be my
studio it's basically a 45x45 room
where I'll be able to do all types of customized videos whether I'm showing
you guys how to build cars how to weld how to
fabricate and do a lot more but I can't do that
unless you guys help this video show some support
because I don't like I said I don't sell
anything I don't believe in like you know selling a $70 hoodie you know I
think that's kind of wrong but I know people and youtubers do that so
they can make money so they can do cool build content all I'm asking for is
basically just to like this video and share it and subscribe because
all these things matter because I think I've talked about in my other videos
even with 500,000 subscribers and me spending you know 30 40 thousand
dollars building stuff like this I make $3,500 a month off of my
YouTube AdSense which is absolutely hilarious
and so everybody thinks that I'm like rich and I'm falling out of control
no this is why I actually practice what I preach
I have a bunch of cars here that we're fixing up that we're going to take to
auction and sell so I actually buy cars and make money
off the cars I really don't make a whole lot of money off of YouTube
now the good thing is I make a lot of really great connections and believe it
or not the connections I believe are worth more
than money eventually I'm going to meet one of you guys it's either a business
owner an entrepreneur or somebody that's
looking at maybe getting started in fabricating or building
we wind up meeting becoming friends and maybe we're doing business together and
that's more of the long-term play I winded up meeting one of my other
business partners Alex from my channel I got a few other people that I've met
I made some really great connections especially like I said another one here
is Copart so I'm truly blessed to be in this
space but at the same time I do need to do something to help out
the channel and make a little bit of money because
my goal is is I'd like to do one of these every single month
and I can only do it with your guys's support so anyways I'm gonna go ahead
and show the rest of the videos and some of the other stuff
but if not I want to thank you guys so much for watching please like and
subscribe share this video definitely check out Copart Select and I
want to thank you guys so much again for watching my channel and taking time out
of your busy day to enjoy some random content
I'll be chopping a Tesla in half and we'll see you next video
