NEW ZZ632 RSX Symetrical Port Big Block Cylinder Heads!!

Engine Nation
3 followers
Oct 24, 2024
New ZZ632 Cylinder head from GM Performance
Performance Racing Industry in Indianapolis, Indiana.
I'm here with my friend Alan.
We spoke at SEMA about the ZZ632 crate engine.
I'd like to talk about the cylinder heads.
We have a little better display here where we can see the combustion chambers.
These cylinder heads are also going to be available through GM Performance by themselves, correct?
Correct.
Okay.
And what is the difference between these heads and the heads that run the ZZ572?
Sure.
So these heads are brand new for us.
These are the new RSX big block cylinder head.
Okay.
These heads were derived from a ProStack head, the DRCE, except reworked to work on the 4-inch
840 big block bore spacing.
Okay.
As a result, you can see a lot of those racing things that trickle down, such as the symmetrical
port intake runners.
It's got a separate valley tray with a dry manifold, fully o-ringed.
These heads take a one-piece rocker bar with shaft-mounted rockers.
And as you can see, the intake and exhaust ports are raised significantly.
Okay.
So what compression ratio is this set up for right now on the ZZ632?
On the engine, it's set up for 12 to 1.
12 to 1?
Okay.
And the RPM of this engine is how much again?
It's 7,000 on this one.
And that's with a hydraulic roller lifter.
Okay.
Now, is there enough material on these cylinder heads that if someone wanted to, they can
still go and rework them and port them out a little bit?
There is, yes.
So these heads will be offered in three configurations.
As you can see here, a ported bare head or a ported assembled head, but we also offer
it as an unported bare head, in which case this is not ported.
Everything is left unfinished for the end user, the customer, to finish.
The seats and guides would come in a bag, a separate bag, with the cylinder head at
that point.
The way it's finished right now, these heads have 70-71 cc combustion chambers, very centralized
spark plugs.
On the 632, the assembled head comes with full titanium intake and exhaust valves, copper
beryllium seats, and bronze valve heads.
Okay.
Now, if someone wanted to go buy these heads, can you just stick these on any big block,
or does it have to be a special bore?
They will fit on any big block.
They have the big block standard old pattern.
However, these heads have the additional four valley lugs here.
Okay.
They're made to work with our bowtie sportsman block, which also incorporate those heads
and those lugs, I should say.
Okay.
These blocks are available, the sportsman bowtie head block is available in either a
tall deck, standard deck, two-piece main seal, or a one-piece main seal.
Okay, but say I wanted to stick these on an old school 396 or 454, can I do that, or would
that run into issues with the valves?
It would bolt up.
You wouldn't have the four valley lugs.
Okay.
So this is just extra clamping force then?
Is that what that does?
Yes.
Yeah, okay.
So you need a special block then.
Can we see the extra bolt there, or no?
You won't be able to.
You can't?
Okay.
It's put together right now, no.
Yeah.
Okay.
And this motor comes with a full warranty then?
Comes with a two-year, 50,000 mile warranty.
Okay.
1,000 horsepower.
Runs on pump gas, 93 octane, and has a hydraulic roller.
Gotcha.
Okay.
Is this going to be a limited production run, or are they just going to sell and manufacture
these for...
No, we're planning on making these things.
Okay.
No plans for a limited run, we're just going to keep making them.
Yeah.
Okay.
That's really cool.
And then this is obviously the first car.
Is this kind of the prototype car?
I forgot.
It was a car that GM used.
It's a partnership, yeah, that we have with Hoonigan.
The car originally was our test mule.
Yeah, that's what I'd heard.
It had a big lock in it.
Okay.
It was donated to Hoonigan along with an engine, and they typically built it into what you
see here.
Yeah.
Okay.
Very cool.
I can't wait to see this thing do some burnouts, because that's what Hoonigan does.
Okay, thanks again for your time, man.
Thank you.
