Why The AMG M275 is a Special Engine | V12 biturbo (4K)

Engine in Focus
4 followers
1 Video View·Sep 22, 2024
In this video, I discuss why the Mercedes AMG 'V12 biturbo' M275 engine is a favourite among enthusiasts. The M275 was featured in the w220 S65, W215 CL65, R230 SL65, G65 as well as others. I start by going over some differences between the standard M275 engine and the AMG versions, then go into more detail on the AMG M275.
In this video, I will discuss why the Mercedes-AMG M275 V12 Biturbo engine is such a legendary
powerplant, powering flagship AMG cars for over a decade.
V12s in Mercedes and AMG cars have a respected history.
V12 engines have incredibly smooth operation.
Most engine configurations tend to require balancers and or counterweights to ensure
that the engine doesn't shake itself apart, but V12s are inherently balanced.
It started with Mercedes' highly esteemed 6.0L M120 and 7.3L AMG M297 engines with four
valve per cylinder heads and superb dependability.
Mercedes then replaced the M120 with the M137 in 1999, which was a less powerful three valve
per cylinder V12.
Now the M137 is notorious for out-of-round cylinder walls and oil fouling problems.
Since the M137 was a bit of a disappointment, Mercedes went back to the drawing board and
came back with the M275 in late 2002.
Like the M137, the M275 featured an aluminum engine block and aluminum single overhead
cam cylinder heads with three valves per cylinder and two spark plugs per cylinder.
However, the engine block as well as the internals were significantly strengthened compared to
the M137 and turbochargers significantly boosted power levels.
We'll start by looking at the different variations of the M275 engine family, such as the Mercedes
5.5L, the AMG 6.0L, and the AMG Pagani 6.0L M158 engine.
So the base M275 engine is a 60 degree 5.5L V12 found in all of the 600 series cars.
It featured fracture split forged steel connecting rods.
The engine also featured twin BorgWarner K24 turbo manifolds and air to water intercooling.
The power output in the standard M275 is 510hp and 612lb-ft of torque.
Peak boost is 14.5psi.
Mercedes also offered a more powerful 5.5L M285 which was put in the Maybach cars with
550hp and 660lb-ft of torque and 18.9psi peak boost.
The M285 simply had better ECU tuning.
Now the Mercedes M275 was revised for the 2014 model year and the engine code was changed
to M277.
Updates included an increased displacement to 6.0L, new cylinder heads, engine control
unit, and ignition system.
Most importantly the transmissions that were bolted to the engines were changed from a
5-speed to now a 7-speed.
And the power for the M277 went up to 523hp and torque remained unchanged.
Now onto the AMG version of this engine.
The AMG M275 was introduced in 2004 in cars like the CL65 and the S65.
AMG increased the bore and stroke of the Mercedes M275 engine to provide a 6.0L displacement
compared to the standard 5.5L.
It featured beefed up pistons, larger fuel injectors, higher intake valve lift, longer
valve opening durations, and larger turbochargers.
It produced 603hp and 738lb-ft of torque.
Peak boost was 22psi.
The engine naturally produced over 800ft-lb of torque but AMG had to detune the engine
in order to preserve the rest of the driveline to their standards.
Despite weighing 4,500lb, the 2005 CL65 accelerated from 0-60 in 3.8s and crossed the quarter
mile in 11.8s at 121mph.
That's basically the same acceleration according to Motor Trend as the Ferrari F430 which was
also a new car for the time.
The M275 AMG engine was selected as Performance Engine of the Year for 2004 by Engine Technology
International Magazine.
The highest output was in the 2009 SL65 Black Series which had 670hp due to even larger
turbochargers and a better flowing exhaust system.
The AMG M275 was revised for the 2012 SL65 and the engine code was changed to the AMG
M279.
Updates for 2012 included modified turbochargers, a new engine control unit, and new dedicated
ignition coils with a multi-spark ignition process.
The pistons were re-engineered and the cylinder heads were better flowing as well as the exhaust
system.
Horsepower for 2012 increased to 621hp from 603hp and emissions were reduced and fuel
economy was improved.
Most importantly, the transmissions that were bolted to these AMG engines were now 7-speed
instead of the Opel 5-speed transmission.
And reliability and ease of maintenance was improved with this new M279 and the rest of
the models in the range received this updated engine from 2014 to 2015.
Based on the AMG M275, they also introduced the M158 which was used exclusively in the
Pagani Huayra.
It featured dry-sump oil lubrication, larger intercoolers, and smaller twin-scroll turbochargers
and a titanium exhaust system.
The engine produced 720hp and later 790hp.
The advantage of this engine was, for a V12 at least, it was very compact and lightweight.
The M275 engine family is very interesting because it was produced for so long, still
with the old-school single overhead cam, three valve heads, and not too many major changes.
It's not the most efficient engine, but it's definitely one of the most characterful powerplants.
All of the iterations of this engine are very tunable, particularly the AMG versions, easily
to upwards of 700hp with just ECU tuning.
To commemorate the ending of the V12 biturbo engine, AMG built 130 units of the 2019 S65
Final Edition with an exclusive trim package and bespoke touches.
These engines are overall a solid powerplant, but there are a few issues to discuss.
The most notorious problem is the coil pack assemblies going bad, indicated by misfires
on multiple cylinders.
There is one coil assembly for each side of the engine.
Each one costs well over $1000.
And this is not a problem after the 2013 revisions as they individualized the ignition system
to each cylinder rather than each bank.
The valve cover gases were also known to weep a slight amount of oil, although this is just
a cosmetic problem.
There have also been rare instances of the turbochargers failing on the M275, usually
because of high load situations.
It is advised that the turbochargers are cooled down after hard use with a few minutes of
low load driving to avoid issues.
The engine mounts are also known to wear out faster compared to other cars.
The intercooler pump can also go bad and cause the engine to heat soak and lose power.
Many of these problems were addressed in the 2013 update of this engine, the M277 and M279
AMG.
Also, the fact that the engine has 24 spark plugs is not really a problem in my opinion
because the service intervals for the ignition system are very long.
Honestly, these are pretty strong engines for the amount of power they produce and they
don't have any major flaws.
So we bid farewell after over 15 years of the M275 engine family, one of the most legendary
engines of all time.
Thanks for watching and if you like videos like this, subscribe for more.
