How to Install Wall Paneling and a Safety Door I Practical Video I Paneling & Safety Door I Interior

Knowledge Hub
101 followers
2 Video Views·Oct 15, 2024
Namaskar friends, welcome to knowledge of channel, let's learn together.
In today's video, we are going to see how wall paneling and safety door were installed.
You can see this image of wall paneling and safety door.
These are some views after the work is done.
This is a walkthrough of how wall paneling was done.
There are two shoe racks on this side.
This is side wall paneling.
This is safety door.
And this is shoe rack.
This is how it looks after the work is done.
Now we will see how it works.
You can see this wall here.
Most of the paneling is made of ply.
This ply is 303 BWR grade.
12mm and 18mm ply is used.
This is ply fixing.
This is a hammer machine to hold the ply.
And this is a cutting machine to cut the ply.
And this is a jigsaw machine to cut the ply into a circle.
In paneling work, there are two lights on the ceiling.
For that, two circle cutting is required.
This is the beginning of paneling work.
There is a ply sitting on the side.
There is a strip on the top.
The ply will be fixed on that strip.
Now the paneling of the ply is ready.
The ply is fixed on the wall, ceiling and beam.
You can see this.
After applying the ply, the joints and nails are grinded and removed.
It should be smooth so that the laminate adheres well.
You can see the grinding process.
This is the design of the laminate.
See this.
This is a 2-inch dark ply.
In the middle, there is a faint section.
Marking is being done according to the design.
After marking the grid, the laminate is cut and applied.
1mm thick laminate is used here.
1mm thick laminate from Advanced Company.
You can see the safety door.
This safety door was pre-prepared in the workshop.
You can see the grid.
In the center, there is an electro-plated grill of SS304.
This is a laser-cut gold finish.
This is the safety door.
The laminate is applied according to the design.
1mm thick laminate is used from Advanced Company.
The laminate is applied according to the grid.
After cutting the laminate from the sides,
it is grinded from the sides so that the edges are smooth.
It takes a lot of time to measure and apply the laminate.
You can see how the edges of the laminate are being smoothened.
This is a 2-inch dark ply.
There is a hollow color in the middle.
The laminate is cut from the laminate cutter.
The laminate is glued to the plywood with the help of Hitex.
Fevicol is also used.
You can see how the laminate is being glued.
Both Hitex and Fevicol adhesives are used.
After applying the laminate, a small piece of wood is pressed on it
so that it sticks properly.
There is also a light on top.
The safety door grill is made of laser cutting.
This is the side wall paneling.
This is the shoe rack.
The same ply is used here.
The ply is fixed to the wall with the help of a hammer machine.
This is the box of the shoe rack.
There is a shelf in it.
There are two shoe racks, one big and one small.
White laminate and 12mm ply are used.
The laminate is being glued to the plywood.
The bottom layer is being glued with a nail gun.
This is the white laminate.
This is also 1mm thick.
This is the 1mm thick laminate.
This is how the shoe rack is made.
This is the overall view.
If you liked this video, please comment.
If you are watching my channel for the first time, please subscribe to my channel.
Press the bell icon so that you can get the notification of all my upcoming videos.
Thank you.
