Lecture 40 : Conclusion

IIT Kanpur July 201
20 followers
2 Video Views·Oct 4, 2024
Greetings, I welcome you all to the concluding lecture of this course, where in now we are
going to just collectively revise what we have been discussing in this course, and we
should be focusing on the topics that we have covered so far, and how we are learning and
relearning and implementing these ideas into developing newer technologies and strategies
for materials recycling. So, let us just focus on the important topics
that we have covered in this course, and then we will be trying to recapitulate as much
as we can. So, classification and categories of metallurgical and e-wastes, some of the
important topics that we covered are basically one of them is classification categorization
of metallurgical and electronic waste. So, those classifications had been discussed,
we had also been focusing on the pretreatment, pyrometallurgy, hydrometallurgy, electrometallurgy
and refining strategies. So, why are these so important, because we know that when we
studied about so many different types of strategies for various types of waste streams, we know
that one has to follow one route or the other, and it depends upon the material waste itself.
So, the classification becomes important, categorization becomes important, we have
seen sorting is one of the most important crucial operations that we should be doing.
So, at the beginning itself material characterization is so important, and then we think about the
waste, what is the most important material that we should be extracting, and based on
that what is a good strategy. So, pretreatment, pyrometallurgy, hydrometallurgy, electrometallurgy
are the collections, the segments that we follow, one after the other they could be
followed, this could be followed in combinations. And finally, one would like to refine the
product that they have made, if it is a metal we would like to go for refining of metals,
or if it is a chemical product then we could be refining, or basically making it better
Now, what are the important wastes that we have studied? So, when we look at aluminum
wastes we see dross, spent pot lining, red mud, scraps, steel slags. So, aluminum had
these wastes, copper we had studied, copper smelter slags, raffinates, spent electrolytes
and scraps. When we looked at zinc, we studied ash, zinc ash, zinc dross, dust, zinc dust
which was basically coming from various sources, majorly it comes from the iron and steel making
industries, and zinc scraps. When we looked at iron and steel making wastes, we have covered
iron making slags, steel making slags, steel making scraps and waste water. So, waste water
that is generated in the iron making and steel making industries, what happens to those waste
streams, what how do we recycle these wastes. So, in the metallurgical engineering segment,
the metallurgical wastes that we had covered, we had these many wastes that we had individually
discussed and we have also seen which route is compatible with what waste, it only depends
upon not only depends upon what where it was formed, but also on the composition where
what is the general composition, how do we what do we wish to extract, what do we wish
to produce. So, based on so many different factors and
process parameters, so at times we would might want to have a metal product, but we would
instead be making a metal compound, because it may be a bit more feasible. So, based on
all of these strategies, we have studied so many different types of recycling routes.
When we move to the electronic waste segment, so we had covered the PCB, the waste printed
circuit board, waste WPCB and the batteries. So, before we went into the PCB, we have also
seen the recycling of general electronic waste. So, let us say AC recycling or washing machine
recycling that that part we have also covered, but majorly we have been discussing about
the printed circuit boards and the batteries. So, in waste printed circuit boards, we had
seen the delamination and the recycling strategies. So, again coming back to the original basics
that we had laid the foundations of pretreatment, pyrometallurgical route, hydrometallurgical
route or trying to fuse these strategies one after the other.
This is how we handle different types of wastes. Similarly, when we think of batteries, so
we have studied different categories of batteries, nickel based batteries, lead acid based batteries,
zinc based batteries, lithium ion batteries. As these batteries we have studied individually,
what are good routes of recycling batteries, what is an important method by which we can
handle these batteries and how we should be pretreating these batteries, so that these
batteries are safely dismantled before we even think of recycling, how we should be
handling these batteries. All of these strategies we have covered step by step.
And in all after we have studied these processes, we have also seen what are good recycling
strategies in pyrometallurgical or hydrometallurgical way or methodology of recycling. So, we have
handling these wastes. Apart from that, we have also seen the environmental aspects of
every waste and how people are trying to bring in life cycle assessment into the materials
recycling. Because it is very important to understand how materials are being reused
and what is the effect it causes, what is the strain it leads, it imparts on the environment.
When these aspects are considered, the complete understanding is achieved. Now, when we think
of a materials recycling course, there are important aspects that one should be considering.
We have environment, we have energy, we have engineering and we have economics. So, these
are in my opinion the four important E's of a given process, environment, energy, engineering
and economics. These E's help us in channelizing our focus
that what is really important in a recycling strategy. Now, when we think of environment,
it may be possible that it may not be completely economic friendly or if it is an economic
process, it may not be environment friendly. One has to devise a recycling strategy for
any waste that we have been studying or for any waste that we could be studying on a personal
basis. So, this is very important, optimizing and
finding the perfect balance between all of them. Engineering facilities that we have,
environmental concerns that are around us, we have the energy constraints and energy
recycling, energy utilization and the in the economics that drives the whole process. So,
all of these have to be brought at the balance to achieve the best recycling strategy. With
this I bring this whole course to a conclusion. Thank you very much.
