Lecture 29

IIT Kanpur July 201
20 followers
Sep 27, 2024
We will start the lecture 29 and the topic of the lecture 29 is that we will try to get out of the ideal solution approach slowly and gradually we will go towards non-ideality
and then we will see how the phase diagram changes.
We have seen in the ideal solution approach that we have got an isomorphous phase diagram in a binary system.
We have seen how it happens graphically and we have developed equations to calculate it and if we solve those two equations we will get isomorphous.
But when we make a solid solution or a liquid solution, there is no heat effect.
In most cases, the temperature decreases or increases when we make a solution.
If we go from unmixed to mixed, there is a temperature effect.
Why does this temperature effect occur?
Actually it comes from the heat effect.
When we make a solution, it can be exothermic or endothermic.
That is why our approach is not ideal.
There is a non-ideality and that is why the heat effect occurs.
That is why we have to do non-ideal treatment.
Today's topic is deviation from ideality.
When we handle a non-ideal situation, we will take a quasi-chemical approach.
Quasi-chemical approach for solution and its influence on phase diagram.
This is today's topic.
We will try to understand this topic through a few lectures.
Now, let us see what is deviation from ideality.
When we tried to make an ideal solution, what did we get?
What happened in the ideal solution?
One is definitely del H mix equal to 0, del V mix equal to 0.
This is our understanding.
Another thing is that we are taking del S mix as configuration entropy.
Minus R XA ln XA plus XB ln XB.
When we are making an ideal solution, we are definitely in a binary system.
To be in a binary system, we had to take the consideration of A and B and elements.
Then we took the number of atoms in the case of N.
We got the Avogadro number of atoms by combining these two.
That means we are making a one mole solution.
We are trying to make a one mole solution.
If we look at the mole fraction, it is XA and XB.
If we add these two, it becomes one.
The pressure is a condition, equilibrium condition.
One is definitely temperature equilibrium.
This is fixed.
Pressure is also fixed.
But here I am taking one atmosphere.
We will keep it at one atmosphere all the time.
The reason is that our normal metallurgical processes have constant pressure and generally atmospheric pressure.
This temperature is fixed.
I can take it at different temperatures.
But when we do the free energy treatment, we will keep the temperature fixed.
So what is happening to me?
There is thermal equilibrium.
There is pressure equilibrium.
Another equilibrium will come.
There is thermal as well as mechanical equilibrium.
We have taken both of them.
And we are developing this.
Another equilibrium is compositional equilibrium.
To do that, we have done some treatment.
That is, first we took in unmixed condition.
In our unmixed condition, G1 is XA GA naught XB GB naught.
In our mixed condition, G2 is XA G1 plus del G mix equal to G1 plus del H mix minus T del S mix.
And if I expand this in the ideal solution, where del H mix is equal to 0.
Here, if we expand, we get G2 is equal to XA GA naught.
I write the whole expression.
This is the free energy of the solution.
If it is a solid-liquid, I can write it as solid-liquid.
Or if there are two phases, phase 1 and phase 2, we can write like this.
So, from this equation, we get the equilibrium condition, compositional equilibrium.
That is, GA bar in phase 1 should be equal to GA bar in phase 2.
And GB bar phase 1 equal to GB bar phase 2.
And the general expression of GA is G2 plus XB del G2 del XA.
We have seen this.
G2 plus XA.
Right?
Exothermic, endothermic.
endothermic reaction.
Right?
And if I mix sodium hydroxide, the tablet type of sodium hydroxide in water, and if
I touch the beaker and see how much it has heated up, and for that I have to be a little
careful when making sodium hydroxide solution, so that it does not splash on my hands, right?
That is also an exothermic reaction.
So, for this reason, it is understood that when we are mixing, the atoms of the elements
are reacting.
And when we see the reaction in an atomistic situation, it means that they are trying to
interact with each other.
This interaction is very important.
What was this interaction here?
Interaction was nil, right?
Interaction was nil.
That is one assumption.
Another assumption is that when we go to a crowded place and there is no place to hide in the middle,
what will happen if we let another person in?
If that person goes inside, will he push out the people around him?
What does that mean?
It creates a strained atmosphere.
Why does it create a strained atmosphere?
The strained atmosphere will depend on the size of that particular person.
If the person is a little bigger or smaller, it will create more strained atmosphere.
If the person is thinner, it will create more strained atmosphere.
That is how the strained effect will be created.
We will not be able to control the strained effect.
The first assumption is that when two elements are mixed in the binary system,
then the size of the two elementary atoms will be equal.
And when the size of the atom is equal,
when there is a particular crystal structure of one lattice,
if that crystal structure covers the other atom,
as long as the size of the atom is equal, there will be no strain effect.
And if there is no strain effect, there will be no energy.
And we know that any strained part contributes positive energy to the system.
For example, if my hand breaks, why do I feel pain?
The reason for the pain is that a strain has developed there.
That strain energy is causing me pain.
Right?
That cannot be controlled.
For example, when we bond atoms,
when we bond them, I will only have a chemical bonding.
And there can be many other kinds of bonding characteristics,
like valency effect, electronic effect.
Right?
Quasi-chemical approach.
Atoms will interact.
Okay?
Right?
Crude assumption.
Simplified assumption.
So,
strain effect.
Okay?
Fine?
Fine.
Fine?
Okay?
Fine.
Okay?
Volume dilation is zero.
Okay?
Dierter assumption.
Assumption.
Okay?
Right?
Isn't it?
Okay?
Atoms.
Closest neighbour atoms.
Coordination number.
Bonds.
bonds
2 Z for BCC, number of bonds 8.
Nearest neighbor atom coordination number, we can say the first order interaction, first
order of atom interaction, second order interaction, second order interaction, right, second order
interaction, no, second order, first order interaction, composition 10 percent B, composition
20 percent B, composition 30 percent B,
composition 30 percent B, composition 20 percent B, composition 30 percent B, composition
composition, composition 20 percent B.
it will be a successful. So, this daily mix
because already A-A bond, B-B bond, A-B bond, A-A bond, B-B bond, A-A bond, B-B bond, so
So, we have a pure A and B in unmixed condition, after mixing we have another extra bond which
is AB.
And each of them has a bond energy, we can call it EAB, we can call it EAA, we can call
it EBB.
Now, when it is in mixed condition, we have to remove it later, but if I see any internal
energy, and if we see the concept of internal energy, it comes from interaction, some energy
which is within the system, and here as we are using solid or liquid solution, here as
there is interaction, there is a bond, then the internal energy depends on the bond.
into number of AB bond, fine.
That means, before mixing definitely equal to EAA into number of A-A bond plus EBB into
number of BB bond, fine.
E E mix equal to E mixed minus E unmixed, fine.
of Z mole fraction of XA, XB, influence topic, definitely bond energy fine, function nothing
is nothing but del h mix, how to find del h mix.
