आज से आपको NO More Doubt, Auto Manual Selector Switch Wiring के बारे में @ElectricalTechnician

Electrical Technician
42 followers
1 Video View·Oct 1, 2024
Friends, after watching this video, you can wire the selector switch very easily.
As you can see, I have a selector switch here.
And this selector switch is our auto manual selector switch.
Let me explain to you what is an auto manual selector switch.
Assume that you want this selector switch to start green light when you select a number position.
And if you select this selector switch on two number positions,
then you have to use the auto manual selector switch.
It is very simple to connect this selector switch.
You simply have to take your phase supply and connect it to the MCB.
And always connect the neutral supply to the neutral link or you can directly connect it.
At the moment, we are using the neutral link here.
At the moment, you have to take the phase supply and connect it to the MCB.
Then you have to take the power supply from the MCB and connect it to the one number position of the selector switch.
Remember, you will get a one number terminal in the selector switch.
You have to connect the phase supply to that terminal.
Now, if we select this selector switch on one number position,
then we have to start green light in this condition.
For this, we have to take the power supply from the one number terminal of the selector switch.
For example, the one number terminal of the selector switch is A1.
Here, it is written A1.
So, you have to take a wire from the A1 terminal and connect it to the power supply.
That means, take the power supply from the A1 terminal and connect it to the power supply.
If you select this selector switch on two number position,
then you will get the power supply from A2.
So, take a wire from the A2 terminal and connect it to the red light.
At the moment, I am using the light to explain to you.
It is possible that if you are using it practically,
then there is an electrical device there which has to be provided by the power supply.
For that, you are using the selector switch.
So, you have to do the connection in the same way there as well.
At the moment, we have used the selector switch to provide phase supply to both the lamps.
Now, to operate these two lamps, a neutral supply is also required.
So, for that, we will connect a wire from the neutral supply and connect it to the neutral link.
Now, take the power supply from it and provide the neutral supply to these two lights.
In this way, the connection is complete here.
Friends, before moving ahead, I would like to tell you that I have a book
whose name is Electrician A to Z Wiring Book.
In this book, you will get a lot of circuit diagrams which will help you a lot.
As we are learning about the selector switch at the moment,
then you will also get about the selector switch in this book.
Our selector switch is mentioned on page no. 73.
So, I will go directly to page no. 73 here.
Here is our page no. 73.
In this page, it will be told how the selector switch works and how you will wire it.
It has been explained to you in full detail.
Along with that, while using the selector switch,
you will also get a circuit diagram of how you will control two motors.
Apart from this, you will also get other things which will be useful for you.
If you want to buy the PDF of this book,
then its link is given in the description.
You can click there and buy the book.
Come on, let's continue today's video.
Now, what will happen in this circuit?
If you start the MCB,
after starting the MCB, if you keep this selector switch in the OFF position,
then both the lights will be OFF here.
But as soon as you select the selector switch on position 1,
then the green white light will turn on in this condition.
And when you select this selector switch on position 2,
then the red white light will turn on.
You must have understood this much.
Now, let's look at a slightly different circuit here.
Here I have a selector switch.
I have sent it to the phase supply in the same way with terminal 1.
Now, I want that if I select this selector switch on position 1,
then in this condition, the contactor here,
this contactor is running through my sensor.
And if I select this selector switch on position 2,
then the contactor will start directly.
So, what will we do to connect it?
Take a wire from the position 1 of the selector switch
and give phase supply to your sensor.
Please note one thing here.
The sensor I am using here is a proximity sensor.
And this sensor will work on my AC power supply.
And there are only two wires in this sensor.
That means it is a two-wire AC sensor, which is of anode type.
So, I provided phase supply to this sensor from here.
Now, I will bring a wire from the output wire of the sensor
and connect it to the A1 terminal of the contactor.
Connection complete here.
Now, if I select this selector switch on position 2,
then the contactor will start directly in this condition.
So, what will we do?
Take a wire from the A2 terminal of this contactor
and connect it to the A1 terminal of this contactor.
Please note one thing here.
The A1 and A2 terminals of the contactor
are the terminal of the coil to operate the contactor.
Now, we have to provide a neutral supply to operate this contactor.
So, we will bring the power supply from the neutral link
and provide the power supply to the A2 terminal of the contactor.
So, after connecting in this way,
our connection here will be complete.
Now, if I select this selector switch on position 1,
then my contactor will start through the sensor.
And if I select this selector switch on position 2,
then my contactor will start directly.
The sensor will not work here at all.
Okay, friends.
Friends, all of you are electricians.
And the book made for electricians,
Electrician A2Z Wiring Book,
that book should be with you.
If you want to buy this book,
then the link is given in the description.
You can buy it directly by clicking there.
