In this video, you will learn how to control one Submersible Water Pump from different floors of a house using a simple and practical multi-point ON/OFF control wiring system.
This wiring is very useful for multi-floor houses, buildings, apartments, hostels and other places where the same water pump needs to be operated from more than one location.
I have explained the complete Submersible Pump Wiring, Motor Starter Control Wiring, and Multi-Floor Pump Control step by step so that electricians, ITI students and beginners can easily understand the circuit.
In this video you will learn:
✅ How to ON/OFF one pump from multiple floors ✅ Submersible pump starter wiring ✅ Multiple push button START/STOP wiring ✅ Contactor holding circuit ✅ Motor starter control circuit ✅ How to control a water pump from different locations ✅ Practical electrical wiring for electricians ✅ Multi-point motor control wiring
This type of circuit can be used when you want to control a single submersible motor from Ground Floor, 1st Floor, 2nd Floor, 3rd Floor or any other location.
If you are learning electrical wiring, motor control wiring, submersible pump connection, contactor wiring, relay logic or industrial control circuits, this video will be very useful for you.
Subscribe to Electrical Technician for practical electrical wiring, PLC, VFD, HMI, motor control, panel wiring and electrical troubleshooting videos.
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
📚 Welcome to Electrical Technician Training अब हर एक इलेक्ट्रीशियन बनेगा इंजीनियर! Learn Anytime, Anywhere.
📘 Books for Electricians 🔹 Zero to Hero House Wiring Book (Hindi + English) A complete step-by-step guide from basics to advanced house wiring. ✅ 184 Pages | ✅ 100+ Topics | ✅ 100+ Wiring Diagrams 💡 Covers: Fans, Lights, Inverter, MCB, Solar, RCCB & More! 💰 Price: ₹100 (PDF) 📥 Buy Now: 👉 https://wiringschool.com/product/zero-to-hero-house-wiring-book-pdf-ebook/
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
🔹 Electrician A2Z Wiring Book Perfect for every electrician – full of thumb rules, motor starters & wiring diagrams. ✅ 190 Pages | ✅ 100+ Diagrams | ✅ Thumb Rules + Starters 💰 Price: ₹98 (PDF) 📥 Buy Now: 👉 https://wiringschool.com/product/electrician-a2z-wiring-book/
🛠 Your Electrical Learning Partner – Arun Gupta 📘 Books | 🎓 Courses | 📲 Support | 📈 Career Growth
══════⊹⊱≼≽⊰⊹═════════⊹⊱≼≽⊰⊹══════
submersible pump wiring, submersible pump connection, submersible motor wiring, submersible starter wiring, water pump wiring, pump control from multiple locations, pump on off from multiple floors, multi floor pump control, multi point motor control, motor control from multiple locations, start stop push button wiring, contactor holding circuit, contactor wiring, motor starter wiring, single phase pump wiring, water pump starter connection, submersible pump starter connection, motor on off wiring, electrical control wiring, electrical wiring practical, electrician training, electrician work, electrical technician, motor control circuit, pump control wiring diagram, house water pump wiring
This video provides a step-by-step technical guide on how to modify a submersible pump starter to allow the pump to be started and stopped from multiple locations (e.g., ground floor, first floor, and second floor). The instructor demonstrates the wiring process for adding external push buttons to an existing starter panel.
Sir, if you have a suitable pump, then that's the one you want.
So that we can operate the three-phase AC supply
Just like we have Gourav flood here, Gont flood
Connect the pump starter wiring as per the location.
From where we take the tea, from there the pump too
Come, you can do it, and from where
Tea can be pumped there from there.
How to make the connection in the end
It will be done, let's go today
Through this video, step by step
step fully detailed about this
Understood. Right now, take a look at this, my customizable poster
When you press the start push button here, the pump turns on, and it starts operating.
Now, this starter—using this starter, we need to connect these push buttons. How should we connect them? Let's go through it step by step.
This is our summer series starter.
If you look closely here, a contactor is installed.
Overload relay on it
And here we have two capersitters.
A kepsiter is our starting one.
In addition, two meters have been installed here.
One is our ammeter, the other is our voltmeter.
And here is our Start Push button.
And when you press the start push button
Here is our overload relay
There is a push-button switch located right above it.
It is processed by Karish.
The motor shuts down due to its age.
Now we need to understand this here
that in the end, with this starter
Here we have two different ones
How to connect it, see whenever you connect anyone
If you're going to make modifications in the starter, understand this
if you need even more reasons to stop
We could stop here, but not yet.
We also need this button, and this one too—this is something you need as well, right?
You brought the stopper. Then what will it do to cut off the power?
If you're going to work, then the power that needs to be cut off, please let us know.
What needs to be done with this stop button, which is part of the circuit?
The power going to the coil of our contactor is this one.
The power supply must always be provided, meaning you must do so whenever you wish.
Remove it and after removing, what will you do with it from this place?
Turn off the power supply switch and bring it back here.
Connect it; the first method, the second method is this:
Please remove this red-colored wire from here.
After disconnecting, turn off the power supply at this location.
Give it to me and bring it back here to connect both of them.
What bothers me right now is that I feel
Disconnect this wire here, then what should I do?
First, the cable from the coil terminal—I'll connect it here now.
Here we will bring a new wire, and on this wire, there is a stop push button actuator located at the turnal where you are.
We have removed the wire; now we need to connect this wire to the one on the ground.
After blinking my eyes. Take it with you.
It's gone, and I've brought the wire here.
Our very first Stop Button
will be. Press the Power button
They will give it. In the hand.
I open it.
After opening. Here
It's our first Stop Button
is. So this Power
To provide
Insert this wire inside it
They will come here and this one will be here
Connect the power supply to the Stop Push button.
Now, the power supply will go through this stop button.
You know this stop push button.
So, we will connect a wire to the output terminal of this stop push button here.
And take the other strand of this wire and bring it here, and after bringing it
The second stop push button here for us
I mean, this is from the first floor, just like our samasibal pump
It will be on the ground floor, so it will be made from the ground floor.
We will use Ertón.
For the first floor
I have used this kind of push button.
about this, from the second floor
I want to make this WOE bond.
I will use the stop button here.
to iss wale stop
the bus button I have
I'll give you power here
to here at nuclear
Pontack
This kind of wire
my connections here
power supply of this stop button
kinetic
connections
Now, this is our stop button
power supply
Pawar supply
I don't know what you're talking about.
What do we have to do?
This one here, our
The contactor has a coil.
With this coil
Back again
Connection needs to be made.
So this meat and milk thing, what about it?
So, at this place
I am this isotope chemical
You? Yes, us?
What exactly needs to be done?
What do we need to do simply?
Besides, if I restart it again and after turning it on
If I want to shut down from here, I can also shut down this same power supply from this location.
I can shut down all three places.
So right now we've only disconnected the connection.
We also need to start this simultaneous pump from these two locations.
We haven't established the connection yet, so we can't start.
This connection is also very simple.
Let me explain this to you.
Look, to connect this
The sensible pump you have
Open and opening
After that, your start
It's a push button, isn't it? Look there.
Two terminals or four terminals?
If behind this four
terminal is given, so its
So four elements of two
Terminal with four wires
It will have to go, and if two
There is a wire, so you need to take out the two wires
If you're going to take it, then right now it's ours
This sensible pump here is only
There are two terminals, so two terminals
We will go outside.
Here is the start push button provided here
Yes, with this start push button
I'll connect another wire here.
Now with this terminal
We'll connect another wire as well.
Now we have to connect these two wires like this
Bring it outside the panel and
After bringing it here, this is ours.
First, press the start push button.
Yes, connect it with this.
If it has to be done, then for this I am the one who will
First, there is a wire here; take this wire
I'll connect it, and this second one here
It's the wire, this wire to this push button
We will connect this on the side.
Thus, it would be good if
The submersible pump you have
It's behind the start push button of his.
Four terminals, meaning four
What would you do if the wire were connected?
Then you need the four wires
Bring it connected with him.
What will happen to you if you start
The connection of two capacitors
If it happens, the four wires will take it away.
It's coming, and whatever is yours first
The start push button is here.
Another one here as well
Anode contact needs to be made on this one.
We'll check here the start push button that comes with it.
One anode, the other one is here
Another connection needs to be made there too.
anode will be like the current one
On the Time device, this is the anode contact, so connect this to
If I can take it out, I can put it here.
I'll remove this from here.
and open this one
I'll mount it on this world.
What will happen now that we are here
And the second one, the two points remaining
If you have it, then the two of you
Bring the cable and connect it to this port.
Hey, what I mean is that you're here
Two elements are needed behind the start.
The same way your second
Even with what will happen, two elements must be added.
At Pilah's time, in my start button
Only two terminals, so bring two.
And connected it together with this and this
It needs to be taken along with it as well.
If you need to connect, then this is what mine
It's a test push button; with it, I'll give you a punch.
I'll polish it once it's bent into shape.
Now, its terminals here on the output side are a wire.
Even so, we will have to make a wire connection.
So, for this, I'll bring this wire here.
I'm connecting it here with this.
So, the two Y games we've played here so far
Take both wires along with their input and output.
And the second start push button for us will be
So what do I do here?
This is my Start Push Button
Along with its input and along with its output
I'm connecting one wire at a time.
In this manner
Now, if you need to start it from somewhere else
So, are you going to take two wires from here?
And the second button is the one labeled "Start."
You will connect it with him.
And for stopping, do the same thing.
The power that came in your stop button here
the button that you press in the button
Boltesh is getting lost here.
Power is coming from around two thirty bolts.
I mean, right now, at this moment, me
I can turn on the Sumar Chibal pump from here.
And I can shape it from this clay.
So, I hope today's class, through this class,
You must have understood it by now.
that the starter motor is
If we have multiple locations
To keep it running continuously
So in the end, in what way for him
We will connect.