"The Gun" (1976) – Part 4: Arms Manufacture Improvement

Battlefield Firearms
3 followers
2 Video Views·Oct 1, 2024
This episode explores the evolution of small arms manufacturing, highlighting key advancements by Whitworth, Enfield, and the Royal Small Arms Factory. From precision engineering to mass production techniques, the documentary examines how these innovations shaped firearm development and military effectiveness.
The records themselves may seem rather dry, but they do deal with the vital question of
the improvement of firearms among the powers who were contending for national influence and
security in 19th century Europe. It was a time of concern, of extensive and informed public debate
about the progress of the soldiers' armoury. Many citizens, including some of the most eminent,
and among them numbers of volunteer riflemen, wanted to contribute to the national defence.
They realised that the rifle was the key to the situation.
What was needed in the rifle was a greater supply, greater range,
greater durability, greater accuracy, greater firepower.
And of all these requirements, by far the most important was greater supply. In the early part
of the 19th century, manufacturing methods were simply not geared to the mass production of
anything, let alone arms. The methods of arms manufacture, which today only survive in a small
number of establishments, catering very much for the wealthy, were in the early 19th century
the only methods of manufacture. Everything was made by hand, with only the limited assistance
of a small number of very simple machines. This applied as much to the production of military arms
as it did to the finest sporting guns, or the cheaper run-of-the-mill weapons.
When war threatened, all that the Ordnance Department could do was to go out to the trade
and attempt to contract for adequate supplies. But highly skilled craftsmen were not to be enticed
away from their lucrative business supplying the wealthy with firearms. The Ordnance Authorities
had to rely upon those who were not skilled enough to earn more money elsewhere.
Not surprisingly, they found it very difficult to procure a sufficient quantity of satisfactory arms.
The same Napoleonic War, which highlighted the Ordnance Department's difficulties,
also gave birth to this remarkable rifle. Remarkable in particular because it was actually
made by hand to such precise standards that all its parts could be reliably replaced in the event
of breakage or damage, even on the battlefield. Its maker was Henry Nock, a pioneer of the
interchangeability of parts. The removal of the lock components could not be simpler.
Even the inner lock plate is removed by simply pressing a catch. Nock not only gave his arms
interchangeability of parts, he also completely avoided the use of screws. This is not the only
screwless design of lock ever invented, but it is one of the very few, if not the only one, which
rarely got into production. Curiously enough, one of the very few other arms liked it to be encountered
which similarly avoids screws, is the Mauser Automatic Pistol of 1896 in its later variance.
In Nock's locks, over 170 years old, the parts do prove to be properly interchangeable.
The parts of the other lock fit easily and seat properly on the plate of the first.
Nock's arms were so well liked by those who received them that new orders for more followed
rapidly. But Nock could not find the extra gunsmiths of sufficient skill to increase his output
and maintain quality. And Nock's were durable arms. One regiment had some for 32 years, refusing all
replacements normally due after 12 years. Nock had achieved interchangeability of parts, but he
had not sought a means of mass production. In America early in the century, Eli Whitney
demonstrated that interchangeable arms could be mass produced by means of machinery.
The swing from hand to machine production gathered momentum in the States, and first really came to
public notice in Britain through revolvers shown at the great exhibition bearing the name of Colt.
During the course of 1854, a purchasing mission was sent to the United States.
The purpose was to buy equipment for the new Royal Small Arms Factory, and this machine was
one of many bought there. The quality of the machine can be seen even in this specimen today.
In fact, it was outstanding, and many of the machines continued in use well into this century.
Some, as late as the 1920s, were still working, turning out SMLE rifle stocks. In fact, this
machine originally was designed for inletting the stocks of pattern 53 rifle muskets, and it was one
where, by rotation, successively the cutting stations were brought into position to deepen the cut.
Well, it was very successful, so successful in fact, that with the example of the Royal Small Arms
Factory, and the example too of the London Armoury Company's model factory, the Birmingham
gun makers could no longer ignore the competition, and they organized themselves into the Birmingham
Small Arms Company. BSA, a name better known today perhaps for some of its other products,
but they had to find something to do to get through the lean years when the demand for
guns in the world was not high enough. The Royal Small Arms Factory at Enfield was immensely
successful. Production was strictly monitored with precise gauges for all parts, opening up
the way to a far higher standard of quality control. For the first time, the British government could
rest assured that at the outbreak of any war, it could rapidly obtain extra supplies of arms which
were genuinely up to the standard of those made in peacetime. With the adoption of the idea of
making all the parts of the arm interchangeable by means of machine manufacture, the problem of
supply was very largely solved. But it was one thing to be able to produce arms in great quantity,
it was quite another to decide what design to make them to. The government would probably not
have decided to set up the Enfield factory unless they had been assured that a rifle both suitable
for machine production and up to military requirements could be devised. The man upon
whom they chose to lean was Joseph Whitworth. By arms collectors, Whitworth is above all remembered
for his polygonal rifling, though it was not his invention and was never generally adopted in the
army. Whitworth's real contributions were to the science of accurate measurements and the
standardisation of threads and gauges. His less direct but still crucial contribution was his
general enthusiasm for the practicality of producing by machinery arms of the very highest
standards demanded by the British Ordnance Authorities. Accuracy and standardisation
and high quality were the hallmarks of all Whitworth's work. So accurate and so well designed
were his mass production tools that some of them are still in use today, over 100 years old.
This Whitworth machine rest is still employed at Enfield for the test firing of barrels,
a memorial to his genius. Though Whitworth's influence was decisive in the 1850s,
it rapidly diminished thereafter. No memorials as tangible as his surviving machinery remained to
all those who kept the government on the right lines, leading to adequate supplies of well-designed
arms in the latter half of the 19th century. It was the Ordnance Select Committee who were
required to advise the government on everything military, from the best mode of using balloons in
warfare, to the military applications of new forms of electric lighting. In the field of small
arms, the committee was especially concerned with such fundamental requirements as the durability
of the rifle. As calibres got progressively smaller, so the barrel wall got correspondingly
thicker. This was obvious enough. The .577 Enfield Pattern 53 would have been unacceptably heavy if
the barrel had been any thicker. The Martini-Henry of the late 1860s shows the reduction in calibre
and consequent thickening of the barrel walls that proceeded through the century. In the case of the
.303 Lee Medford, walls any thicker would only have increased accuracy to the detriment of other
criteria. Barrels had to be thick enough not to get bent when a bayonet was misused, and also not
to burst if accidentally fired whilst partially blocked. Barrels were proof-fired then as now to
ensure that they had a considerable reserve of strength. By the late 1850s, voices were being
raised on behalf of steel rather than iron as the answer to problems of barrel strength.
In the Whitworth Rifle of 1863, steel barrels were tried out. This one was made out of Perth steel.
Steel was generally adopted for rifles after the mid-1860s.
Unfortunately, it was not so easy to provide equally durable cartridges at the same time.
At the Royal Laboratory, a switch was made from making paper cartridges to ones of brass foil
with paper gummed onto the brass. The whole cartridge was of the simplest rolled construction
with an iron base riveted on. This frail cartridge was really Hobson's choice until about 1871.
The means of extruding a solid brass case of military standard had not been devised.
After 1871, when means were available to produce superior solid brass cartridges,
the timing of their adoption became purely a financial matter. In contrast, the adoption of
the sort of internal mechanics found in the Martini-Henry, with its coil spring mechanism
for detonating the cartridge, was very much a matter of convenience in production techniques.
Greater accuracy of fire was another of the vital requirements of the time.
At Enfield, trials were held to determine the shooting accuracy of various designs.
This was an area where great contributions were made by private citizens.
One man in particular contributed to the question of greater accuracy of fire.
In his system, dominant in military small arms after 1870,
the rifling consisted of very shallow grooves to minimise friction, with paper-patched bullets
of hardened lead so formed that it was only after expansion by firing that they acquired
the optimum ballistic shape. The inventor of this clever and successful system was William
Ellis Medford. Medford possessed mastery of detail and vision, the concept of what the future would
demand of firearms. Long before the Vickers arrived, Medford was the first man to worry
about accuracy of fire in a machine gun, foreseeing that in arms development, success
would eventually go to the most comprehensive weapon, coupled with an ability and capacity
to manufacture it in quantity. From the time when the volunteers and their rifles first became a
commonplace in early 19th century Britain, very many citizens had felt that they could contribute
through arms to the security of their country, and their interest in arms development consequently
led on to great advances in 19th century technology. Though nothing in the view of most
of us can justify war, save a threat to our liberty, yet the general benefits arising out
of a preoccupation with national defence flowed through the medium of technology
into almost every aspect of Victorian life.
