Cold Steel Smallsword

"Echo Blade "
1 follower
1 Video View·Sep 30, 2024
My review of the Cold Steel Smallsword with a penetration test!
Hey folks, back with another little video. This time another sword review.
This time we are looking at the Cold Steel Smallsword. This is a sword that's been on my
radar for quite some time. Though I must admit, being that small swords historically aren't
sharpened. Some were, most were not sharpened edges, just points. It's kind of a hard sword
to add to my collection. It was a hard one to convince myself into, but I really wanted to
have a small sword to round out my collection. They look very beautiful and something about it
kind of seemed a bit specialized. Specialized just for thrusting. Very different sword than
any of the others that I own. And I gotta say, once I got it and got it out of the package,
had a close look at it, anybody who collects swords and knives and stuff nowadays might realize that
Cold Steel has kind of hit or miss. I hate to say it, I love the, I love, I've got a love-hate
relationship with them. They, I love their designs, I love their price range, but their
quality control leaves a little bit to be desired. However, not on this one. I've been over
this with a fine tooth comb and unless you're, unless you're expecting, you know, tens of
thousands of dollars quality at a $500 price range, you can't complain about this. This thing
is flawless and beautiful. Speaking of that, let's have a closer look at it. Let's start by
taking a closer look at the hilt. Again, like I said, just gorgeous.
It's got a lovely engraved pommel. It's got a very nice, nicely executed peen. I don't know
if you can see that well or not. The brass winding. I know some of the older models I looked at on the
This has a brass wire wrap with a steel wire interspersed in between it. Gorgeous, man.
The finger rings that I know are not for your fingers are beautifully executed. The engraving
is nice. The engraving on the shell, on the two lobe, is that what they call that? A guard,
two lobe guard, something like that. Whatever, it's very nice. A wide fort of the blade,
the base of the blade, very wide, very steep. If I had to give one little gripe, the blade is very
straight to it all. The point is very needle sharp. We'll see that when we go out to the backyard.
One little gripe I would say is when you're cleaning it with a cloth, you can tell that
the fuller up the back side of the blade is a little wobbly. The scabbard, beautifully done.
This little piece with the ring on it was a bit loose, but not too bad. It's very tight.
The fit of the sword into the throat is really tight. It goes in, and I've been kind of sitting
down. We should look at the shape. Nicely engraved, nicely done. Stitching up the back
is nice and tight and straight. Overall, a very, very cool scabbard. Again, though, like I said,
it's very tight fitting. Not really nicely finished, just kind of folded over leather in
there. I've been just sitting watching TV shows, just kind of putting it in and out.
Eventually it'll loosen. It's getting a bit looser already, but small gripes for the price.
Speaking of the price, Canadian dollars. It was $496 Canadian. Not the cheapest sword in my
collection. Certainly not the most expensive sword in my collection. Great value, I gotta say.
And I thought we'd throw in some specs. Specs on this sword is a blade length of 31 1⁄4 inch.
It's listed as 1060 high carbon steel on Relics. I've heard some people say 1055. I'm not going to
nickel and dime over 0.5% carbon. Blade thickness is 7 16ths of an inch. Triangular cross section,
so blade thickness is a little bit different on this sword. It's definitely thick. Full length,
38 1⁄4. Handle length is 7. Weighs 24.6 ounces. 24.6 ounces translates to 697.39 grams.
Just under 700 grams. It's a little heavy from the research I've done for small swords,
but it's cold steel. You know they're going to make it as heavy as possible. So I'm very impressed.
More impressed when I got it out and in my hand. It was a surprise. It was definitely a surprise
once I got it out and took a closer look at it. Felt it. Watched a few videos on how to grip a
small sword. And as I said earlier, it was an odd sword in my collection being that there's no
live edge on it at all. Just a very, very, very nasty tip. I'm not going to go too deep into the
history of the small sword, but it's the evolution of the rapier. The rapier being a very thin but
yet bladed weapon. Heavy slashing kind of gave way to thrusting. I guess people were using rapiers
and just not slashing very much with them, just thrusting. And somebody came up with the idea of,
why even sharpen it? And let's make the blade shorter, stouter, stiffer, and dull,
and just pointy. And that's for the small sword. But a very essential piece of fancy dress in the
Victorian era. Like a tie would be today at a wedding. You didn't go out without a small sword
on your head. And I think I could see why. It was a very beautiful, very, very beautiful weapon.
So as we do with all of our sword reviews, we're going to take a trip out to the backyard to the
cutting stand. Not a cutting stand in this case, it's going to be a penetration stand.
The first target that I started with is actually a pork shoulder roast that I just bought for supper.
And still in its plastic packaging and wrapped up into the leg of an old pair of jeans
and a drumstick. In case you're wondering what that first target is. Then I went down to some
of my regular targets, coffee cups, juice, Tetra Pak, and a Gatorade bottle. So I didn't go too
crazy. Very good penetration though. I'll take you out and let you be the judge of it at the
cutting stand right now. First time we're looking at the cold steel small sword. As this isn't a
slashing sword, this is going to be a different session. This is going to be all about penetration.
Starting with something different. This is a pork shoulder and a denim and denim. So let's
the backyard from what I've ever done, no doubt about that. But I think it shows the point, proves
the point. This thing definitely would run you through in a hurry. Somebody I saw review a
small sword one time said it was the medieval equivalent to having a nine millimeter handgun.
Just poking holes, you know what I mean? So again, a very, very cool sword, a very nice piece to round
out my collection. And one I'm happy to bring to you guys, one that I'm happy to display.
As I say all the time, stay tuned, hit the bell notification. More stuff cooking,
more things yet to come. So as always, I hope you enjoyed this video. Thanks for watching folks. Bye.
