The BEST Damascus Swords You've Ever Seen

"Echo Blade "
1 follower
27 Video Views·Jan 1, 2025
All right, Blasphemous, congratulations.
The two of you have made it through the first two
rounds of our layer race competition, which means
you're going into the final round.
Now, we are giving you four days of your home forges
to battle it out for the title of Forge and Fire Champion
and a check for $10,000.
We want you to build this, the Mesopotamian sickle sword.
The sickle sword originated in Mesopotamia
at the height of the Bronze Age, around 2500 BC.
These sickle and curved-shaped swords
often symbolized royalty and power
and were primarily wielded during ceremonies
by kings and authority figures.
Although these swords were not common on the battlefield,
the belly of the blade allowed for quick, devastating blows
and inspired designs for later weapons,
such as the deadly Egyptian khopesh.
Good luck.
We will see you in four days.
My name is Robert Taylor.
I'm from Brentwood, California.
I'm a sergeant with the San Francisco Sheriff's
Department.
I took up bladesmithing because I'd
like to watch the forge and fire.
It's something I really want to go further in and become
an ABS smith, maybe a master smith someday,
because I love forging.
So I'm going to go 500 layers of damascus on each side
with a 1084 center core.
All right, we're going for our final forge weld.
Long as I'm solid with my steel, 1084
will give it more stronger center.
The place where I want it to bend will bend down,
and then the tip will start bending up
automatically as I hit it.
I'm whacking it on the horn to get it to bend down.
It's easier than using the hammer.
I like it.
Got the build all ready for the quench.
This quench doesn't go right.
I'm going to have to go ahead and start over,
and that's going to suck.
Went in pretty hot.
We'll see if we have any bad forge welds.
We have a hard plate.
I want to keep it light enough and balanced enough
for somebody to swing it.
Getting there, I feel really good about my weapon.
Getting all the fit up done, I think
this thing's going to slice anything they put before it.
My name is Jacob Gates.
I am 20 years old, and I'm from Royalton, Minnesota.
Martial arts has always been my first love and first hobby,
and then I got into bladesmithing.
They both kind of crisscross, because when
you're making a knife, it's just got
to be real patient with it.
Wax on, wax off.
I'm going to put a ladder pattern in this steel.
Kind of can see the ladder pattern in there already.
The length and curve of this blade
is going to be difficult to work with,
just because I want to make sure everything stays straight
and doesn't have any warps to it.
Looking good so far, because ultimately, that
could send me home if that's not spot on.
Getting ready to quench here.
I feel pretty good about my progress.
Everything looks good.
That's a good temperature.
Oh, that is straight.
Everything's looking good.
Now we're going to have to temper it.
That's going to take away a little of this hardness,
and it's going to add toughness.
Because right now, it's pretty brittle.
If I just went and smacked it on my end,
it would probably shatter.
I think the hardest part is going to be getting
the heat just right.
I don't have an oven long enough to fit this sword in,
so we're going to have to do it all with a torch.
It's not going to be as precise as having an oven.
Don't want to overheat it.
Makes me a little bit nervous, because I don't
know the ultimate outcome.
But hopefully, we get it just right.
I want to make sure everything is even on this handle,
and everything feels good.
As a martial artist, I'm really into flow,
and I'm really into feel.
This is good.
I'm not quite sure what my strength test is going to be,
but I think whatever they throw at it,
it's going to be able to handle it.
Bladesmiths, welcome to the kill test.
So to find out what kind of lethal damage they will do,
I'm going to take your weapons and deliver some lethal blows
on this ballistics dummy.
Jacob, you're up first. Ready?
Cut the head off.
Let's do that.
All right, Jacob, let's talk about your sickle
sword right here.
Your edge is razor sharp.
Coupled with the fact that this is a very light weapon,
I can use velocity to really wield that sharp edge.
It cuts deep into this ballistics dummy.
And overall, sir, your weapon will kill.
Thank you.
All right, Robert, your turn, sir.
You ready?
I'm ready.
Let's do this.
All right, Robert, let's talk about your sickle sword.
It's a very light blade, that much lighter than the other one.
And the angle that you have in here
lends itself to use not only velocity,
but the sharpness of your edge to cut very
deep into this ballistics dummy.
And overall, sir, you will kill.
Thank you.
Bladesmiths, welcome to the strength test,
the armored warrior chop.
To test the strength and overall durability
of your Mesopotamian sickle sword,
I'm going to be chopping into these armored warriors.
Jacob, you're up first.
You ready for this?
I don't think I get a choice.
You don't have a choice.
What actually happened is your sword
bit into the other sword by about 3 16ths of an inch,
and it took out this chip.
And once that chip was gone, the whole sword blew up.
Your grain looks good, but unfortunately, it's
just this sword against that sword.
This time, that sword won.
Yep.
All right, Jacob, we hate to see this happen.
You gave us a beautiful blade, but unfortunately, it
did suffer a catastrophic failure on the seventh strike.
You are not out of the fight yet,
because Robert, in order to become the champion,
you will have to survive every single one of those seven
strikes on the armored warrior.
You ready?
Let's roll the dice.
All right, Ben.
Well, Robert, the big thing is it's one sword.
Nice job.
Thank you.
Well, Robert, you made it through all the testing.
Jacob, it's a beautiful piece of work.
Unfortunately, due to your catastrophic failure,
we cannot continue testing.
And for that reason, I'm going to have to ask you to please
step off the forge floor.
Thank you, gentlemen.
It was an honor.
Thank you very much.
Very nice job.
You know, it totally sucks.
But I really am proud of the blade I made.
Either way, you know, they said pretty much
nothing but good things about it up until it broke.
And well, I'd totally come back for this
and maybe get a shot at making it all the way through.
Robert, we never like to see competitors' blades break,
but yours did not.
And that makes you the newest Forge & Fire champion.
You just got yourself a check for $10,000.
Congratulations.
Thanks.
Feel pretty good?
Crazy, dude.
Crazy.
Winning this championship, I think,
has really pushed me to my limits.
And then that makes me want to push them even more.
Now I'm a champion, I'm going to go
ahead and get my ABS Smith membership
and just really refine my skills.
Well, Ryan, Matt, gentlemen, congratulations.
The two of you have made it past the first forging
round in our Best in Domestic competition, which
means that the two of you are going back
to battle it out from your home forges for four days.
Now, Ryan, because you impressed the judges
most in the first round with your blade,
you get the choice of one of these three
blades to build against your competitor here.
Now we've got the hook sword, the killage,
and finally the panobis.
What are you thinking?
Let's go with the killage.
Killage, all right.
The killage traces its origins back to the 15th century
Ottoman Empire.
This lightweight, sharp, curved blade
was specifically designed to be wielded single-handedly,
making it ideal for warriors on horseback
to deliver deadly slashes upon enemy attackers.
This formidable weapon was previously featured on season
5 of Forged in Fire, where both smiths
overcame complications with the length of the blade
and the ornate lingerie.
But ultimately, an extreme bend taken during the strength test
cost one smith the competition.
Good luck.
We will see you in four days.
Good luck.
Hey, good luck, man.
I'm Ryan Searles.
I'm a 20-year-old artist and bladesmith
from Thornton, Colorado.
I've always loved to craft and build things with my hands.
And when I found out I could play
with fire and hammer steel, I mean, come on.
What's not cooler than that?
I want to shoot for a braided mosaic Damascus.
Woo!
I'm going to stack up, fill it up about 28 layers,
forge it out, chop it into tiles,
and I'm able to create a braided mosaic.
I got this sword forged out to where I want it to be,
and I'm ready to go for the heat treat.
All righty.
If I don't get this blade hard, I could be out on this.
Oh, yeah, we got warp.
There's a slight warp to the right,
so I know I got to put it between two 2 by 4s
and clamp it up.
Otherwise, if I can't get that warp out now,
it's going to bite me in the butt later.
Woo!
That's pretty straight.
I want to fit the longes and handle together.
It has to be inlaid just so I can
get a very tight and nice fit on it.
So it's time to get the blade into the acid
and see this pattern pop.
All right, moment of truth.
Woo!
Look at that.
Woo-hoo!
Yeah!
We got a killage.
I brought my A-game.
Can't wait to see what Matt does,
and can't wait to hopefully get that 10K.
There we go.
My name is Matt Roberts.
I'm 41 years old, and I've been making
knives for about 20 years now.
I've been practicing law now for about 14 years.
My goal is to win the competition
so I can have bragging rights and, frankly,
be insufferable to my friends more so than I am already.
I'm forging a coarse ladder pattern in this blade.
The hardest part of this build is
going to be forging the Damascus and making
sure I have a very solid fillet.
This far into the process, if the blade fails,
making another blade in the time remaining
is, frankly, impossible.
Yeah.
We're good.
I want to have more mass in the handle.
I also want to be able to have a bigger, more contoured handle
that would be more comfortable to the user.
I have the handle rough shaped.
There is some gapping between the handle and the guard.
Try to fill these the best I can.
I don't think any of the flaws are going
to affect its functionality.
They're just cosmetic, and they're ugly.
Got the handle done.
That doesn't look half bad.
I think, overall, it came out OK.
I'll be looking forward to seeing the sword used.
I think that will be fun.
Bladesmiths, welcome to our dynamic keel test.
Ryan, you're up first.
You ready for this?
Let's do it.
All right, Ryan, let's talk about your tillage sword here.
First up, I appreciate the beauty of the Damascus pattern
you have there.
Also, what I like about this is that it's
got that classic tillage look where you got parallel lines,
and it's slowly curved up.
That's what we like with a historical piece like this.
Now, your handle construction, everything is smooth.
No sharp corners on that.
Your edge is sharp.
It almost cut through all the way on the pig carcass
and the Tommy Matts.
Overall, your weapon, it will keel.
Awesome.
Matt, your turn.
You ready?
I'm ready.
All right, Matt, let's talk about your tillage.
It's not quite the historic accurate tillage,
because you don't have those parallel lines.
It neatly goes down into a curve.
Your handle construction is also not the typical tillage look,
but your edge is razor sharp.
You've got a very nice balance to wield this weapon,
and overall, your tillage will keel.
Thank you very much.
Bladesmiths, welcome to our dynamic strength
and cutting test.
I'm going to attempt to cut through these vines
and smash these skulls.
I'm not going to go easy.
I'm going to have fun with these.
And Ryan, you're up first.
You ready to go?
Let's break some skulls.
Nice job, Ryan.
Your edge is still very, very sharp.
Sweet.
No glinting or anything.
Cut beautifully, and overall, tested very well.
Good job.
Awesome, thank you.
All right, Matt, it's always more fun
for the second guy, right?
I'm ready.
Well, I'm ready, too.
Let's go.
All right, Matt, nice job.
Thank you.
I like the blade.
I like the weight.
The Damascus came out beautifully.
You have the slightest bits of glinting.
I mean, it's very minimal.
Your handle, a little unorthodox.
And right in this area, I wish I had rounded off
a little bit more, because it's a little bit sharp right
where my thumb sits on this part.
But nothing's loose.
Nice job.
Thank you very much.
Well, gentlemen, you gave us two swords that performed
outstanding in our tests.
But at the end of the day, only one of you
can leave here as a Forged in Fire champion,
getting a check for $10,000.
After discussion, our judges did make a final decision.
Today's Forged in Fire champion is Ryan.
Congratulations.
Matt, you missed out by just a little bit,
and Jay's going to tell you why.
Matt, you brought us a great sword and a great performer.
You should be very proud of what you did.
But you did have a little bit of glinting on the skulls
during the strength test.
And the handle has got some hot spots.
And I can feel them when I'm swinging it.
Big thing, though, is the historical accuracy.
What you brought us is a little bit
off from the traditional killage.
And that's why we're sending you home.
I understand.
Well, Matt, you brought us a beautiful blade that
did perform extremely well.
But unfortunately, your time in this competition has ended.
I'm going to have to ask you to please
step off the forge floor.
Congratulations, man.
Great job.
Thanks, man.
The whole thing, it was fun.
It was exciting.
It was challenging.
It was everything I was looking for.
All right.
Congratulations.
That makes you a Forged in Fire champion.
You'll be receiving a check for $10,000, man.
Congratulations.
Thank you.
Forged in Fire champion?
What?
Oh, man.
It feels good.
I mean, Matt was a insane competitor.
It feels good to make it through all the tests.
And 10 grand, hey, that's just a plus to me.
