What Fighter Pilots ACTUALLY Do Just Before Launch
Sep 27, 2024
Hey, welcome aboard. Do one last check to make sure your ejection seat is armed.
Today we're on the USS Theodore Roosevelt CVN-71 on the flight deck getting ready to do a day ULT
or unit level training sortie somewhere over the Pacific Ocean near Wake Island.
The plane captain has released us. Our chocks and chains have been removed
and now our director is telling us to pull forward from the finger near L-4 which is on
the aft port side of the ship. The PC tells us to stop. He gives us that big thumbs down meaning
put your hook down. I drop the hook with my right hand and we wait now as they go behind the
aircraft to make sure the hook is down fully extended and that it looks good. Hook comes back
up. Now the director is going to walk back in front of the aircraft and if everything looked good
give me a thumbs up thumbs down meaning hook check hand signal and then overall thumbs up
telling me that my hook is okay. There it is. Okay, closed fist means stay where you're at
as the director walks out in front of the aircraft. Looking to his right trying to figure
out where he's going to taxi us. Gives us the brakes release signal with the hand wave telling
us to come forward. I look to the left to make sure my wingtip clearance is good. Look to my
right to make sure it's good as well and we pull forward. Nice and easy pulling forward. Left turn,
left turn, left turn. Now he's pointing to another director. Let's make that left hand turn. You can
see that director now is by the jet blast deflector for catapult three. Tell me to turn.
Stop turn. Now come forward. Come forward. A little bumpy as we go over the arresting gear.
So now let's take a minute to look at the JVD or jet blast deflector off the nose. The JVD is
pretty neat. It's six individual panels. Each panel's got two hydraulic arms on the back that
can raise and lower the panel. All six panels will move in unison and on the back of the panels you'll
see a network of pipes and those pipes are for the ship to pump seawater through to cool the whole
thing down. You saw me take a quick glance to my left and back to my right and with my right hand
I move the wing fold switch into the spread position so our narrow wings are slowly spreading.
They're spread by now. We're good to go. The JVD is designed to cool down the exhaust from a Super Hornet
which in max grunt right before a catapult launch can get as hot as about 2300 degrees Fahrenheit.
So it certainly needs seawater to cool that thing down. Otherwise it's going to be melting tires and
shoes. Somebody with a taxi will walk across it after a catch-up. So let's take an opportunity
to look at that Super Hornet that we can see at our left 10 o'clock. This is kind of a unique
angle that we can see what's going on near the nose gear of the airplane. From our perspective
in the cockpit you can't see down there exactly what's going on. So I'll point out what's going
on as they do it for that aircraft. You can see the director is telling the pilot to move the
aircraft forward a little bit and the whole back operator, the guy in the green shirt by the nose
gear, is walking and looking at the whole back fitting. He's about to hook up to the airplane
and then to the flight deck. The whole back fitting is a three foot long bar that's going
to connect to a cleat behind the shuttle and it's going to connect to the nose gear of the aircraft.
Now the whole back fitting literally holds the aircraft back so that when the aircraft goes to
mil or max power the aircraft will not release and start moving unless that power is combined
with the power from a catapult shot and the jet will go fly. So now the jet in catapult four is
pulled forward. They've gone up to the shuttle. The whole back operator has put the whole back fitting
on the nose gear. It's connected to the cleat and in a little while when they're ready they're going
to pull that aircraft forward about another foot or so to put the aircraft into tension.
When they put it into tension now the launch bar on the very front of the nose gear is going to go
over the shuttle and into the shuttle with the whole back fitting pulling back on the aircraft
trying to hold it in place and that's when the aircraft goes into tension. When we go into
tension we take our feet off the brakes. We put our parking brake in and the aircraft's just kind
of stuck there in tension. The catapult is now ready to go. You can see the catapult officer
taking one last glance at the shuttle and the whole back fitting making sure it's good to go.
Now everybody's kind of just watching catapult three as that aircraft is getting ready to go.
There's my signature move. I hope you enjoyed that. You see the rudder pedals on catapult three
moving now. So on the jet on cat three moving. So he's coming up on the power wiping out the
controls. Our jet is moving around tremendously. Even though the jet blast deflector is in front
of us there's still a lot of hot exhaust coming around that thing. It's moving our jet as you can
hear super loud. There he goes. He's off the races. Now the JVD is going to lower.
Everybody scurries to catapult three now as they work on the jet on cat four.
And now the whole back operator is the guy in the green shirt by the nose landing gear of the
airplane. He's going to tell the shooter to have the airplane full forward just a little more so
the launch bar can go over the shuttle and into the shuttle. And that hand signal means bring it
forward, bring it forward, bring it forward. There he goes. Boom the launch bar is now in the shuttle.
He's in tension. That hand signal means tension. And now he's going to run away from the jet
making sure that he's clear. The shooter or the catapult officer is going to walk up there and
give a wipe out signal and the run-up signal. And here he goes. So now they're going to wipe out the controls.
This is a mill power cat shot. He's not giving him the pump. Thumbs up, good to go. You'll see
the shooter point downrange and they're off to the races. Now everybody scurries out of the way
from cat three to cat four making room for us. Our director is slowly telling us to come forward,
come forward, he'll come forward. This is slow, come forward, come forward, more, come forward.
Slow hand movements mean very slow. Stop. That hand signal launch bar down with my left hand.
My launch bar comes down now. Our launch bar is now in the track to the shuttle but it's not quite
in the shuttle. Now one thing of note if you look at our left 10 o'clock you can see guys in green
shirts by the IFLAWS or the improved Fresnel lens. Those are actually visual landing aid
electricians and they're de-rigging MOVLAS which is the manually operated visual landing aid system
and rigging up just the normal ball as we call it for flight operations. Now MOVLAS is a backup
shipboard visual aid landing system that's used when the primary system which is like the regular
ball is inoperative due to like a battle casualty or it's just plain out inoperative you need to
work on it or when stabilization limits are exceeded. For instance if the boats move around
a whole lot big pitch and decks or lastly when the paddles or the pilots just be training and
normally in a day like this we get one cycle one recovery cycle a day would be MOVLAS just for
pilot and LSO proficiency. One thing that's neat about MOVLAS is the LSOs can control the flight
path that's displayed to the pilot regardless of where the pilot actually is on glide slope. This
is especially helpful in situations where there's like a big pitching deck and the pilots need to
be synced with the deck that even though the pilot may be below glide slope but they may appear to be
above glide slope based on a pitching deck and the paddles with the joystick and the lights can tell
them exactly where they are or at least where the paddles wants them to go. So it's kind of neat
we're parked here we can take a minute and look at the actual eye flaws. You can see that it's got
the green lights they go across sideways on it and that's what we call the datum and we reference the
ball which is the light in the center of it which you can't quite see here because it's not on yet
the ball in the center of it is called the source. Now if the source is above the datums and you're
above glide path and the source for the ball goes below the datums and you're below glide path and
well below glide path you'll see a red ball which is really bad news you don't want to see. You can
also see above the datum there's a series of green lights those are called cut lights and the LSO
with the stick that they hold can push a button that'll activate cut lights which is like a roger
ball indication or in a zip-loop operation can mean a little bit of power and below that are
some red lights which you can use for basically wave off lights when you get waved off you get
a big flash of those red lights. Okay now we're pulling forward the director on our right side is
getting us forward just about to get into tension you can see the shooter or the catapult officer
at our left 10 o'clock or so communicating with the guys working in the bubble down there
who are actually operating the catapult. Looks like we're going to pull forward just a little bit more
there it is okay there's tension feed off the brake part and break in and now we're going to
turn our attention to the shooter who pounds his chest says me me me and she gives us the
run-up signal we're running it up we're wiping it out going to max power looking at the flight
controls checking the blends one last time everything looks good quick hand salute head
goes back and wait wait wait and there it is flynavy. Well guys if you enjoyed the jam today
please like leave a comment subscribe buy me a beer i'd sure appreciate it
the details are in the description. Welcome aboard Grau Jams!

