My Secrets Exposed on the 100lb Bow Build

The Saga of Past Longbows
6 followers
Are you ready for the secrets?
Today I'm gonna deliver a 100 pound bow
and show you what I normally don't.
Because I don't always practice what I teach.
Like here, making pencil marks for the camera
but never using them in the bow build.
I'm choosing bamboo today because, well, it's amazing.
I tailor the bamboo by eye to make sure it bends evenly.
I've also built bows where I didn't do this at all.
Both of them have made good bows.
Cutting out the profile to the exact shape of the stave
makes glue up much easier.
Bandsaw for roughing,
sander for getting down to my lines.
Polyester string are my clamps.
Glue is my glue and a glue spreader is my glue spreader.
I personally like to use too much glue
so that it drips onto my vice
and makes my vice harder to use next time.
But seriously, this is the cheapest, easiest way
to clamp a bow together.
Just use a string.
It takes some time to wrap it,
wrap it tight, and it does really well.
I often have recommended to space the nodes evenly
on the bamboo, which can make the tailoring easier,
but it's not necessary.
In this bow build, I don't because.
I like to add a little reflex to the bow.
I'm doing this by harnessing the glue up.
Once the glue cures,
the bow will somewhat stay in the shape I clamped it in.
Dyslexia is one of my gifts,
so using a tape measure or a ruler upside down
is pretty common.
If you see any of my misspelled words,
please just overlook it.
And if you can't, just pretend like it's a logo.
Then you can call it art.
We sell these hickory staves at Shatterproof Archery
and we added the bamboo as an optional option.
Everyone who's ordered so far added the bamboo,
so I figured I'd see how heavy of a bow I could make
with this bamboo and hickory combo.
Looks like the string did the trick
and the glue lines look great.
Sanding and rounding over all the corners
helps keep splinters from raising.
So this is kind of a precautionary step
that I do every time.
I'm building a universal handle,
so you can shoot left or right handed,
and I'll wrap it in leather.
I'll show you how I do that later.
Here's my dirty little secret about tip overlays.
I use a Dremel tool and I eyeball it.
No measurements.
I've done so many of these,
this is the fastest and easiest way
to knock one out super quickly.
Then a rasp to clean up just a little bit.
Sand it smooth.
I'll use the Dremel to mark both sides
and then connect the dots
and repeat like I did on the other side.
This is how to do a tip overlay in under one minute.
And I'll finish with this automotive sandpaper.
Beautiful.
I mean, functional.
In my mind, sanding down the back of the bamboo
with like 220 or 300 grit sandpaper
seems to keep the fibers down.
I don't know if it actually does.
It just makes me feel good though.
Now to tillering.
This part is generally the quickest part of the video
and the longest part of real life.
It's a lot of patience and repetitive actions.
This bend is already 80 pounds of draw.
At this point, I didn't know I was gonna try
to make a hundred pound bow,
but it's kind of like eating a box of your favorite candy
80% of the way through.
You ain't stopping there.
We got to go up to a hundred.
So that's what I did with my bow.
Here's another thing I don't recommend that I do.
I start to tiller with a belt sander
until I get it to brace height.
This is dangerous for the bow's survivability,
but with Sharpie guidelines and adequate experience,
I am extremely confident in this.
Tillering goes like this.
Check the bend, mark where you want to remove material,
remove material, exercise the limbs,
check the bend, mark where you want to remove material,
remove material, exercise the limbs,
check the bend, mark where you want to remove material,
remove material, exercise the limbs,
and repeat this maybe 20 or 30 times.
You could eyeball it.
You could use math.
There's lots of methods.
This is where most people start cautiously
and then get more aggressive,
where you should actually do it in reverse.
You could start more aggressively
and then get more cautious as time progresses
because removing the same amount of material early on
and later on will affect the bow completely differently
because it's a different percentage
of total mass still on the bow.
In other words, if you're going to be aggressive,
do it early.
If you're going to be cautious, do it later.
I haven't really said this,
but I like tillering sticks better than tillering trees.
You know, I built a nice tillering tree
and then I got this janky tillering stick,
but it's so nice when you're using a tillering gizmo
because it holds it in place very easily and very well.
Plus, I like being up close
and working with the material, feeling it.
I don't know.
I'm not sure if it's just nostalgia
because that's how I started,
but I like a tillering stick in every case
except for exercising the bow limbs and testing poundage.
So today, I'm going to use both.
If you perceive tillering like putting together a puzzle,
I think you'll enjoy it more.
Be patient, go piece by piece, scrape by scrape,
and it might take you a little bit more time,
but the bow may last a lifetime
rather than it blow up in your face.
And that's worth it to me.
Come on, buddy.
Hi.
Yeah?
I'm making this bow.
Here, I'll show you how we remove wood.
You go like this.
Look at that.
You want to try it?
Okay.
Here you go.
That's called a cabinet scraper.
A scraper, yeah.
You want me to help you?
Yeah.
Okay, you go like this and you push it.
Look, you get wood.
Good.
You want to try it by yourself?
Good job.
That's how you do it.
How's it looking?
What's that?
These are the wood shavings that come off the bow.
Oh.
Yeah.
I'll generally scrape pretty slow
so the camera can see it,
but if I just need to remove material,
it goes more like this.
Weird, but effective.
It also depends on the goal.
Sometimes I'm trying to finish a bow quickly.
Other times, I'm there to enjoy every single scrape.
So, this isn't completely standard.
I like to round the corners after scraping
with some sandpaper,
and then we can go back to the tillering tree.
About 23.
And maybe a 22.
Working with the bowstring on is nice.
You don't have to remove it and put it back on,
but getting in this corner is the difficult part.
So, if you can learn to turn your scraper
at a specific angle,
you can get all the way down.
Just make sure not to nick the bowstring.
Yeah, I exercise the limbs 30 times
between every single scrape session,
and so this is what it looks like.
That's 80 right there.
I like to use quick-dry poly from a spray can.
It's fast, it's easy,
with a pretty decent finish.
I also don't always wear a mask.
I recommend doing so.
Chances are I'm gonna die way early because of this.
It's a good idea to use a spray can
It's pretty cold out,
so the heat box should give it a more regular temperature.
Ooh, leather handle time.
I've never really taught this,
so this is my favorite method.
Get some blue tape and a chunk of cardboard.
You'll wanna cut the cardboard
just so it fits on the back of the bow.
Then wrap the entire handle in the blue tape.
We're making a template to see
how big of a leather piece we need.
Cut along the cardboard.
This will keep your bow safe.
Then unwind the tape.
Nearly any leather will work great.
I prefer something between two and four ounces
and something that's pliable, soft,
will feel good in the hand.
Put the tape template on the leather
and cut out the exact shape.
Then I'm gonna punch holes.
I'm gonna eyeball it and kinda do it randomly.
I'll use a scratch awl to keep my holes aligned.
If all you need is leather for this specific project,
leather stores will sell their scraps really cheap
or even give it away for free.
Now you can thread the leather onto the bow.
Since we punched holes, we don't even need a needle.
I prefer to have the stitch line on the back of the bow.
That way it doesn't interfere with the shot.
I don't even know what a good pattern is.
You can see how I did it here.
The only thing I would do differently
is align those first holes.
You can see the leather doesn't match up.
That was just a silly mistake.
My favorite way to string a bow
is the leg method with a long bow,
but you just gotta add a little bit of force
when it's a 100-pound bow.
I originally was gonna make an 80-pound bow
because I thought I could pull it back,
but now the 100 is really pushing me.
I don't have experience with heavy draw archery,
so I'm sure my technique's bad as well,
but I'll do my best.
Seven targets set up.
That's pretty close.
That wrist slapped me good.
Think I wanna be that dumb.
What do you want me to test?
It's the following day,
and my guess is that some people would like
to see the feet per second on this thing.
Three, two, one.
Oh, my back popped.
There's one issue with testing,
two issues, there's two issues with testing that.
The first one is I can only draw this
probably to 24, maybe 26 inches on a good draw.
The second issue with that
is the weather's terrible outside
and I need enough light for the chrono.
Bad weather never stopped us from trying anything.
Gonna get warm first.
Wow, a 50 feels so light now.
It's crazy, some of those people
who do 150 or 200 pound bows,
that's gotta take a lot of practice.
And some muscles.
I built a 100 pound bow with Ipe and bamboo
a couple years ago,
and so far the Hickory one I definitely like better.
The fog's cleared up a little bit.
All right, let's see if I can even
make it through that sucker.
No reading.
I only have so many poles in me.
Gonna aim a little lower.
Oh, 191.
I could definitely get it back further than that.
All right, Kramer, let loose.
See if we can get above two here.
I continue to get the bow back
and can't beat 191 feet per second.
So when I increase my strength,
I'll show you what this bow actually shoots.
Until then, thanks for watching and stay shatterproof.
