Tips to improve Bonsai, Summer Bonsai work.

Eisei-en Bonsai
37 followers
In this video I'm going to be working on this large ficus benjamina. I'm going to be doing
some grafts on this and as well as a repot, outputting into a slightly larger container
to allow this tree to get even thicker. Also as you can see there is already a current graft
right here. Benjaminas are known for not really back budding too well on old wood and as you can
see the arms or branches are too long. I already did an approach graft here which took really nice.
This one I already took but I'm going to use the same two grafts up here and another graft up here
and I'm also going to do a trough graft which is going to pretty much drill through the wood and
get a new branch towards the back. Let's get started with the repot and then the grafts.
So the tree has been taken out and as you can see that thing was pretty much full of roots.
This thing grows like crazy and I'm just going to slightly sort out the roots. Now keep in mind
I repotted this tree. I did not make a video but I repotted this tree towards the end of
December because it was already getting lots of roots in there but it's already grown crazy.
So that's the reason why I want to use a larger pot, slightly larger, just to have more room for
the tree to grow and develop even better. So that is what I'm doing here. I'm just going to sort out
the roots a little bit. So this is the pot that I'll be using. This pot is a little bit larger.
It's wider to the side which is going to allow the roots to spread. Now you might be wondering
why you're switching a tree that's already in a bonsai pot into a plastic container that makes
no sense. Well sometimes you have to go backwards in order to keep moving forward. What I mean by
that is that this tree I kind of rushed it into a bonsai smaller pot and the tree's not ready.
It's not ready. It's not ready for a bonsai pot. So I want to go back, take some steps back,
put it into a plastic training container, allow the tree to thicken up more, develop better,
and once it's ready then I'll be putting it back into a bonsai pot. So that is the reason why.
So let's put it back into this pot. So this is how the tree is going to be fitting into this pot.
I know, again, it's a slightly larger pot but it is going to allow the tree to develop even
further. So I'm going to just do a basic repot and I'll show you the result. So as you can see
the tree has been potted up and it doesn't look too bad honestly. I think it looks pretty okay.
Now the pot is even bigger as you can see. Way too much space now for the roots to develop.
In the other pot it was already already crowded in there. So I know that this is going to fill
up really nicely and it's going to allow for the tree to thicken up even more. So now let's go ahead
and go and work on those grafts. The reason why I can work on those two things at the same time
is because ficus take anything. They are tough trees and also I did not do any root pruning.
I did slightly sort out of the roots but no pruning. Nothing major on the roots. Just up
potting which does not really stress the tree at all. And let's go ahead and work on those grafts.
Okay so here I am and this is a site that I'll be using for the graft. This is an approach graft.
This is a pretty long shoot that I've been letting it grow and what I'll be doing is
I'm going to twist it this way. Pull it a little bit and attach that right about there.
So that is going to create new branching on the tree making it look a little shorter and not too
leggy. So I'm going to do it right about here. I have my power tool here. This is a carving tool
and this is what I'll be using to create the little dent to be able to position the branch
it'll go right about there. So that's a good spot. This is actually really good.
Now what I need to do with a knife I need to grab the side of the branch that I'm trying to graft
and peel off the side a little bit to help the fusion. Now that I peeled off the little
part not completely just to where it shows the green then I'll be able to place it together.
Once I've placed it together what I'm going to do is I'm going to add some cut paste
just to help it stick and help it stay in place until it fully takes. So that is a wrap pretty
much what I did. I redid this one because it wasn't really taking it was just crossing over
so I did it a lot better not now. So it should take I have this one up there two grafts and
another graft. So three grafts and then I'll be the fourth one that I already did. So that is going
to be pretty much it for you know what I need to do on this tree to improve it except for one thing.
So I did something that hopefully it works. This right here is a cutting that I took and I just
put it right in front of it because let me show you the back of the tree. As you can see it's
pretty nice and full but once you get to the back it's really empty really empty on this area right
here. So what I need to do I need to do a thread graft a branch right above here to make sure that
I have a background branch to make it you know better. So this cutting I took it and hopefully
it takes once it does I'll be using it you know of course it's going to grow and I'll be using
it to do the thread graft. So that is pretty much it for this video. I really do hope you enjoyed
and please subscribe share if you have any tips on how to develop this even further
let me know in the comments down below. Have a great day!
