Propagating Satsuki azalea bonsai (2 year timelaspe of Rhododendron indicum)

Eisei-en Bonsai
37 followers
Rooting Satsuki Azaleas. It's not that hard.
Have you ever wondered while you were pruning your Satsuki Azalea how can I propagate these?
It is actually quite easy. Follow me and I'll show you how to take Satsuki Azalea cuttings,
how to propagate them. I'll show you the end result of a bunch of cuttings that I took last
year and that I have now potted up here and the roots that I formed so you know yes this works
and I can do it myself as well. Now what you need to turn a Satsuki Azalea plant like this
and prune them and use the cuttings to create a nicely rooted cutting like this is the following.
Of course you need a Satsuki Azalea or in fact no you don't need a Satsuki Azalea,
you need a cutting of a Satsuki Azalea. Look for cuttings that are nice and long,
there's no signs of diseases and the plant has good leaves. Typically these are taken
in early spring but in this video I show you that also midwinter cuttings do work.
A nice sharp scissor. If you want to use rooting hormone select your preferred rooting hormone.
I'm using a liquid. In this video you'll see it is not necessary. As Satsukis dry out quite easily
I prefer to use one bigger pot in which I put all my cuttings and of course I use a fairly
fine-grained substrate. If you have it adding Kanuma to the substrate might help the rooting
success but I don't think it really is necessary. As one cutting is no cutting make sure you have
plenty of material and plenty of sizes. A whip like this is actually ideal for propagation.
Removing everything that's dead, removing some of the weak leaves and then you're already
ready to go. I like to be prepared so I typically fill my pot with substrate before I start taking
cuttings. You can of course water it now already a little bit but it doesn't really have to be
watered beforehand. Keep your workspace clean. Then the cut paste. Normally it would be good
to take this cut paste out of the container. Putting your cutting directly into the container
means that you contaminate your cut paste. And a little bit goes a long way so I only need one
little drop. Keep in mind that one single branch can give you multiple cuttings. One, two, three, four,
five, six and maybe the main branch seven cuttings from just one clipping. Personally I prefer these
whips of about, well, a matchstick size. As said we keep the wound fresh. We clip off the end
so that you have a nice fresh cut and then you dip it into your rooting hormone. You don't need a lot
just tipping the end is enough and you can do this for every single cutting that you want to take.
Some people prefer to take a cutting and then taking off a little bit of the bark at the end.
I've seen it's not necessary but well hey if it makes you happy do it. I don't need extra work.
I am going to try here this with the thicker cuttings because I usually take the younger ones
but let's see what happens if I take a bigger one. Just like that. Plop it in the hormone.
So this way from just pruning one tree you can get a few dozen cuttings and this is important
because not all of them might root. This is all you need to do for taking your cuttings. Now once
you're done collecting all your cuttings and you can take multiple sizes with lots of foliage of
little foliage you just start pushing them into the substrate. And this I mean in the most literal
sense there really is nothing special about it. I am really just pushing them in. Now as I'm putting
multiple cuttings in one pot this reduces the airflow between the cuttings and in this case
this is actually a good thing because that will aid in keeping them humid. The one thing that
you need to ensure in the aftercare is that they cannot completely dry out. So these for me go in
a very sheltered position underneath a bench that is in mostly shade and they will stay there until
I see clear signs of extension growth. Now these cuttings have all started to wake up. It is early
spring. I think it is a little bit late. I've also taken these cuttings in the middle of winter right.
I'm just going to water them well. I'm going to put the pot in the shade. This is not going to
see any direct sun for the next probably three months but it is going to be in a very bright spot
out of the wind. And I make sure that every time I water my trees I also get these watered.
That way they shouldn't dry out. You can of course put it in a plastic baggie. Look at some of my
other videos on taking cuttings and you can see that a plastic baggie works wonders. But I found
it doesn't have to be that way. Now let's move back one and a half years ago. That is when I got about
20 of these. I planted them up and I pruned them back and I took cuttings. Let's see what I did then
and the process how I got to these. This is a rooted cutting from this plant. We're still in
December. This was just the first round of pruning. These I am going to pot up. Don't know whether
they'll root. Officially I think you take azalea cuttings much later in the year, say early spring.
But you know what, I can always toss it away. I like these. They have nice flowers and I know
lots and lots of people would love to have some cuttings. So really not doing anything fancy here.
Just a big tub. Coarse substrate at the bottom just so I don't have to put a lot of fine substrate
because I don't have a lot anymore. This is just normal fine substrate in which I add a little bit
of the Japanese clay specifically for azaleas. Fill that up. As you can see it's still very dry
so I need to water it well later on. But it's pouring with rain. It will be fine and I am just
going to literally plop all of these in there. They don't have a real big value to me because
I have already 18 plants and I'm just doing this to see whether they root in winter.
This is maybe something that is good for you to know. I do try a lot of different things and this
would be my recommendation to you. Try things. Pop things in a container if you don't know whether
they'll root. You will know a year later if they have rooted. And if they have not rooted you might
not know why they have not rooted. So you can try again or you can research more deeply.
But if you don't try you'll never know. So now I took all these cuttings and they're sitting in
a pot and I realized if I leave them in there there's a big risk of if there's any roots they
start growing into each other. Therefore what I'm going to do now I'm going to pop them out of this
pot. I'm going to plant them into a somewhat bigger container and make sure the roots don't intermingle.
Gives me also a chance to take a look at these plants and I don't need to repot them again for
another year or so. There's quite a few of these little sticks that are actually not growing at all.
They've dropped their leaves but all in all you can see there's quite a few that still have leaves.
I didn't do that very delicately did I? One with roots. Roots. Roots. Roots. Roots. There we go.
Looks like most of these actually have roots. The ones that still have leaves
with substrate all the way up to the to the rim of the pot here and then a little bit lower
further down. And basically what I'm going to do is just pot these up in rows of four
at a light slant. Hopefully stimulating this to get side branches on one side allowing me later
on to prune it back. And I'm just going to fill up the pot this way. Of course this is not going
to reduce the risk of growing roots into each other all that much. But at least for me peace of
mind I've separated them now and then I'll see again in spring what it looks like. This is of
course what you could do if you were doing this at home. That you pop them up straight away now
in nice little pots or you wait until spring and you just plant them up then. But for me I just
wanted to get this out of my system. I needed to know what they were doing, how well they were rooted
and whether I needed to take any action. Well these are now one and a half years old.
All of these cuttings are pushing growth. I'm going to lift them, plant them up individually
and see what my rooting success has been overall. There's quite a few that have died off over the
season but that's okay. I don't need a hundred of these anyway. Let's get these out and pot them up.
No, they don't have to be taken out now. I'm just going to gently take these out of the pot.
Here you can see this one. It did root but it died off over winter. Same for this one. Also roots but
died off. Here roots but died off. I don't know what happened. It might have been all the rain
that we've been having. Okay that's eight that passed away. Three with nice roots. I'm not going
to do any root work and those are just in the water so I can calmly work on these cuttings.
I'm just going to, well three-way intersections, I am going to reduce a little bit. And for potting
up I'm just using a few small pots and for the majority I'm just using this potting up tray.
They're not really great for developing bonsai but for rooting, for planting these cuttings out
they're quite okay. I'm also using the old substrate that I had initially because the
plants were doing in it quite well and there's no reason to change a winning game, right?
And I'm really trying to avoid overthinking things so just making sure the roots are in the pot
covered up. Then at the next repot, maybe in a year or two, that's when I start looking at
which roots do I really want to keep. Put these young ones, I hope, to move on within this season.
Right, I think we're all done for now. This was growing bonsai,
Jelle, and rooting tzatziki azaleas. It's not that hard.
