Lecture: 28 Rolling resistance

IIT Roorkee July 201
61 followers
Aug 22, 2024
This lecture covers the concept of rolling resistance or rolling friction and the coefficient of rolling resistance.
[Music]
[Music]
hello everyone welcome to the lecture
again today we are going to study the
final topic on friction that is rolling
resistance please note that up to now we
have discussed the friction between the
rigid bodies that is the deformation was
assumed to be negligible so let us
understand rolling resistance by an
example let us consider a rigid wheel
of we
W
and radius
r that is
ruling on a rigid horizontal
surface
with a constant
velocity okay so the situation is
following we have a rid wheel and this
wheel is rolling on a rigid
surface okay so let's say its weight
is w and uh in that case there will be a
normal force from the surface on the
wheel and let's say this normal force is
n
now
since
both W and N they are
perpendicular to the direction of
travel the
wheel encounters no resistance
and therefore it will continue to roll
forever but we know that in the real
world both the wheel and the surface
they deform in the region of the contact
so therefore the Practical situation is
following we have this wheel
and then we have the surface both the
surface and the wheel they deform the
deformation in the front part it tries
to stop the motion okay so the
deformation
in front of the
wheel it
retards the
motion and the material which is behind
the wheel that is in recovery so
therefore it assist the motion
okay and practically we know that uh the
deformation in the front of the wheel is
larger than the recovery therefore
eventually the wheel is going to stop so
practically
the retarding
force due to deformation
is always
greater
then propulsion
force from the recovering
material and because of that the contact
force
n we
have a horizontal
component which will
Oppo so practically the situation is
following we have this wheel which is
rolling on the surface
okay let's say its weight is W then n is
going to act such
that it will oppose the motion and this
reaction force n has to pass through the
center of the wheel now note that to
keep the wheel rolling
at a constant
velocity we
require
a horizontal
Force let's say F which will be equal
to
the horizontal component of n
okay so again we have this
wheel this
is on a
surface and this wheel is
rolling let's say it Center is
O weight is W then the reaction
force will act like that now this will
pass through the center of the wheel now
we have to
apply a force F so that this wheel will
keep rolling with a constant velocity
okay the
magnitude
of force
f is known as r rolling
resistance
or ruling
friction okay now let me mention this
again that under the influence of the
force F since the wheel is rolling at a
constant velocity therefore the wheel is
in dynamic equilibrium and therefore the
N should pass through o okay
so
for dynamic
equilibrium
n should
pass through
o now let's say a is the point of
application of N and a small
a represents the horizontal distance
between point a and the vertical line of
center of the
wheel okay and since this
wheel is
rolling
under constant velocity therefore the
moment about a will be
zero okay so let's say the radius of
this wheel is R then
W into the perpendicular distance which
is a equal to the force F
into its vertical distance so which is
uh so let's say this angle is five and
since this is R then the vertical
distance will be R cos
5 now note that five is the
angle between n and
vertical okay and
practically this a is much much smaller
than R therefore 5 can be assumed to be
0° therefore cos 5 is almost equal to 1
so we get
W into a = f into r or F = A / R into W
and this can be written as Mu R * W
where this a by r or mu
R is
called the coefficient of rolling
resistance okay sometimes you will see
that a is also
called the coefficient of rolling
resistance
and to identify whether a is called or a
by R is called the coefficient of
rolling resistance you have to look at
the dimensions now with this very basic
concept let us look at some of the
examples the first problem statement is
following an 400
Newton shopping cart
with 180 mm
diameter
Wheels rolls down a
ramp
with a constant
speed if the slope angle
of the ramp is
1.5° what is the coefficient of rolling
resistance now in this question it is
given that the diameter of the the wheel
is 180 mm therefore the
radius will
be 90
mm and uh we know
that the coefficient of rolling
resistance mu R is a / R now from the
geometry you can see that a is
90 s
1.5° okay so you can take this as
5 and uh then a will be 90 sin 1.5°
which comes out to be 2.3
559 mm so either you can call this the
coefficient of rolling resistance in
millimeter or you can calculate mu so
that will be
2.3 559 divide by R okay so divide by 90
and that comes out to be
0262 now let us look at another problem
statement the lawn
ruler
has a mass
of 80
kg if the arm ba a
is
held at an angle of 30° from the
horizontal
and the
coefficient
of rolling resistance
for the ruler
is a equal
to 25
mm determine
P
needed to push the
ruler at constant speed
so let us look at the free body diagram
of uh the roller that we
have okay so we have this
ruler and uh its
WID
is W = to mg so you can multiply 8 by
9.81 so you
get
7849 Newton then we have a force which
is acting at an angle of
30° from the
horizontal okay so this is p this angle
is 30° so uh I can uh you know decompose
this Force into the normal and uh the
horizontal Force so this will be
P cos 30° and that will be
P
sin 30° now for the dynamic
equilibrium a reaction force R is going
to act on this okay and uh let's
say it act like this
okay so note that this R has to pass
through the center of the ruler and uh
it is
given that
a which is the distance between the
point of application of R and the normal
distance from point O so this is a and
it is given that a
is 25 mm so to find out P let us take
the M about
a okay so in that case the r will go
away so we have a
7
84.8 Newton Force it's distance from
point A is 25
mm and uh it has a tendency to rotate in
the clockwise Direction so therefore it
will be minus
minus
P sin 30 into 25 so again this Force P
also has a tendency to rotate in the
clockwise Direction so that will be
equal to P cos 30 into the radius of the
roller which is 250
mm and this will be positive because
that has a tendency to rotate in the
anticlockwise direction and this gives
you P equal to
96.7 Newton let us look at another
problem
statement the
cylinder is
subjected to a
load that
has a
w
if the coefficients of rolling
resistance
for the cylinder top and bottom
surfaces
are a a and ab respectively
show
that a horizontal
Force
having a magnitude of P equal to W into
a a + a divide by 2
R is
required to move the
load
and
thereby Ru the cylinder forward
and it is given that
neglect the weight of the
cylinder
okay so first let us look at the free
body diagram of the load that we have
okay so we have
this load and uh on this load a force p
is applied and its weight is
W okay now you have to note that
everything is in a dynamic
equilibrium so therefore a reaction
force from the cylinder is going to act
on it so let's say the reaction force is
like that let's say it is RA a so this
ra will have both the horizontal and the
vertical component so let's say the
horizontal component is RA ax and its
vertical component is r a y then because
everything is in dynamic equilibrium we
can use sumission FX equal to Z
so we have summation FX equal to0 and
this gives
me R ax = to P similarly summation FY =
0 is going to give me r a y equal to W
now let us look at the free body diagram
of the cylinder
okay so we have
this
cylinder now equal and opposite ra is
going to act on
it and uh this ra has to pass through
the center of the cylinder
let's say it is acting at a distance
of a a and similarly From The
Bottom the reaction force is going to
act okay and uh again it will pass
through the center of the cylinder so
let's say this is RB and it will act at
a distance
of
ab okay let's say this point is a and
this point is B now since everything is
in dynamic equilibrium therefore the
moment about B should be zero so we can
take summation MB equal to zero and
before that let me break this Force ra
into the horizontal and vertical
components okay so this is R ax and just
now we have found that this R ax is
equal to p and uh
r a y is equal to W so for dynamic
equilibrium summation MB should be equal
to zero so we have this Force p and uh
its vertical distance from point B is 2
r equal to withd W into the distance
from point B the normal distance and
that is equal to a A plus a there for p
is equal to w a a + a / 2
R okay now based on the same concept let
us look at one more problem so the
problem statement is
following a steel
beam of mass
1,200
kg is
moved over a level
surface
using a series
of 30 mm diameter rulers
for
which the coefficient
of rolling
resistance
is
0.4 mm
at the ground and 0.2
mm at the bottom surface of the
beam
determine the horiz Al Force
P
needed to
push the
beam
forward at a constant
speed
okay so we can use the formula uh or the
result that we have derived in the
previous
question we have P equal to w a a +
a / by 2 R now note that this Force p is
going to be divided over n number of
rulers so let's say there are n rollers
similarly the weight will also get
divided over n rollers so if eventually
this n will get
cancel and we have the formula that we
derived earlier so P will be equal to w
w
is
1,200
into
9.81 into a a a a is given it is 0.2 and
ab is 0.4 divide
by 2 into r r is 15 mm okay because the
diameter is 30 mm so that comes out to
be 235
Newton so please note that in this case
when the rulers were massless we found
that uh the force that is required to
move this uh Beam with a constant speed
is independent of the numbers of rollers
that we have so this result
is
independent from the number of
ruler now let us look at an example
where the ruler has the
mass so the problem statement is
following determine
the smallest horizontal Force
P
that must be
exerted on the 200 pound block
to move it
forward the
[Applause]
rulers each
weight 50
pound
and the coefficient of rolling
resistance
at the
top and bottom
surface is a equal to
0.2
in so let us first look at the free body
diagram of the block that we have
okay so we have this
Block Force
p is applied on it and its weight
is W equal to 200 lound so since
everything is in dynamic equilibrium
therefore the reaction force from the
ruler is going to act on it
and it will act like this okay now let
us look at the free body diagram of the
ruler okay so we have
this roller its Center is let's say
o
now since you have this reaction force r
a
therefore the reaction force is going to
act like
that and uh this
time this roller also has a
weight let's say this is W2 and this one
is
W1 now from the free body diagram the
component of r a along the horizontal
direction will be P / by n where n is
the number of roller that we have
similarly the component of RA along the
vertical direction will be W1 divide by
n okay similarly you have the reaction
force from the bottom surface and uh
let's say this point is B this point is
is a this distance is a a and this
distance
is a b so everything is in dynamic
equilibrium therefore we can
take the
moment about
B so we have
P
into p 2 R because the distance is r + r
= to 2 R / n equal to with
W1 into a a +
a divide by
n+
W2 into AB okay so note that here we
have used the previous result that we
have
derived okay so from here we get p equal
to W1 a a + a + W2 into a into n so let
me mention here that n is
the number of ruler which is equal to 2
divide
by 2 R so let us put the value we have
200
into 2
+2 + 50 into 2 into n is equal to 2 / 2
into r r is
1.25 and this is equal to 40
lound with this let me stop here see you
in the next class thank you
[Music]
