Lecture: 29 Revision: static

IIT Roorkee July 201
61 followers
Aug 22, 2024
In this lecture, we revisit the main concepts of statistics.
[Music]
[Music]
hello everyone welcome to the lecture
again in the last 28 lectures we we have
covered the static part which was half
of the syllabus of this course therefore
it is right time now that we revise the
concept that we have learned so far so
this lecture is about the revision of
the static
part and we started with the concept of
the rigid body
a rigid body does not deform under the
action of the forces so
suppose I have this rigid body and let's
say I have the ith particle and I have
the J particle and let's say from the
origin the position Vector is r i and RJ
in that case r i j which is the spacing
between the particles
so this is r i minus RG mode it has to
be constant under the xon of force okay
so c i j and this is C is constant and
this is true for all I and J okay so the
body
that does not
deform under
the xn of
forces is called the rigid body now we
also discuss what is sliding vector and
what is free Vector okay
so sliding Vector so let's say I have a
body and on this body you apply a force
okay then in that case the xtion of this
force does not change if you apply the
same force on the line of xtion of it
okay so you can apply the force here or
the same Force you can apply here or the
same Force you can apply there okay so
in that case the force becomes a sliding
Vector so a sliding
Vector
has
unique line of xtion
but
not a unique point of
application okay so for example you
cannot shift this Force to some other
location because then it will also
introduce the torque so this is not
possible but along the line of xtion you
can slide it so therefore force is a
sliding Vector
now free
Vector so free Vector is something that
can be positioned anywhere in this space
okay so for example let's say I have
this rigid body and there is a free
Vector okay so let's say this is a free
Vector in that case this Vector you can
place anywhere in the rigid
body okay so
it can be
placed anywhere in space okay
and the example is the couple
okay so couple is a free Vector now we
also saw how we can find out the
resultant of the
force okay so again let's say I have a
rigid body and on this rigid body Force
F1 and FS2 is acting and let's say the
angle between them is Theta then the
resultant R will be square root fub1 S +
FS2 s + 2 fub1 FS2 cos Theta and uh the
resultant so this is the resultant R and
the angle that it makes from F1 let's
say it is Alpha then tan Alpha will be
FS2 sin Theta / fub1 + FS2 cos Theta we
also discuss the moment of a
force okay so let's say I have a rigid
body and on this rigid body a force f is
acting
so let's say this is the
point about which I want to determine
the moment so let's say this is O then
from o you draw any position Vector r on
the line of ation of
f okay so the moment about o becomes
this Vector R cross F okay and uh the
magnitude of M about o is also f d where
this D is the perpendicular distance of
this force from
o okay so
R
is any position
Vector which
run
from point
O to any arbitrary point
on the line of
xn of f okay and uh D
here is the perpendicular
distance from
o to the line of X and of
f okay now if the moment
is
produced by to
equal opposite and non colinear
Force then it is called
couple okay so here the situation is
following you have this rigid body and
uh let's say a force f is acting like
that and another Force f is acting like
this then we saw that uh the moment of
this Force about any point
O is equal to the force multiplied by
the perpendicular distance between
them okay and this moment about o is
independent of Point O so you can
calculate the moment
about let's say o prime or o Prime so in
that case this will be equal to moment
about o Prime and moment about o Prime
so therefore this becomes
a free Vector we also discussed that
Suppose there is a rigid body and on
this rigid body a force f is acting at
Point P1 and you want to shift this
Force at some other point P2 keep keep
the same external effect so this can be
done by having this
Force at Point P2 and then you have to
account for the
moment and the moment will be Force into
perpendicular distance D
so this will be the
D next we discuss the free body diagram
and equilibrium analysis
so for the free body diagram
particularly we look at the support
reactions okay support reactions of
smooth surface
support reaction
from roller
support rer
support pin
support and here in we discuss two case
freely hinged pin
and the
pin that is not allowed to
rotate so if the pin is not allowed to
rotate then it also support the torque
and
uh the built-in
or fixed
support okay for for the equilibrium
analysis we use summation F equal to Z
and the moment about a point should also
be zero okay so summation F equal to 0
there are three equation FX equal to 0
FY equal to 0 and f z equal to zero then
we
discuss the
beam beam is a
member
which
supports a transverse
load okay and uh if the load is
distributed okay so suppose there's a
beam and on this beam we have a load
that is some function of x
okay then uh this distributed load it
can be replaced by the concentrated load
and the total
load R is equal to W DX where W is the
loading intensity
and the center thir of the
load which is xar measured from here is
equal to integral x
wdx / R we then discuss the flexible
cable and it has two cases in the first
case we discuss the cable
carrying uniformly distributed
load along the
horizontal okay so uh we have this cable
okay okay let's say this point is a this
point is B then we fix our
axis at the minimum point of this cable
so this is the x-axis this one is the y
axis and uh let's say this height
is h a this height
is HB this length is sa
a this length is
SB and this
length is L A and this length is
lb and
W is the
load per
unit horizontal
length then the equation of the cable
y was y equal to W x² / 2 T which is the
equation of the
parabola okay here this T not
was the horizontal component of
T okay or horizontal component of the
tension and uh it was tal to T cos Theta
and that was constant the
tension in the cable can be find out
using t = to W Square < TK
x² + lb s / 2
HB whole square and for maximum T So for
T maximum my X has to be Maxima okay and
the maximum value of x here in is equal
to lb now the length of the cable
can be find out using SB equal to
lb 1 +
2x3
hb/ lb ² minus 2x
5 HB over lb to the^
4+ dot dot dot similarly you can find
out sa then the total length will be S
Plus SB here in you have to note that
your h B over lb has to be less than
half in the second case the loading
intensity was uniformly distributed
along the length of the cable so this
was the case wherein you can think of
the
cable which is
hanging under its own
weight okay so
again let's say there's a
cable and uh let's say this is the
minimum point of the cable so we fix our
AIS
here okay this point is a this point is
B so therefore this height is h a let's
say this height is
HB this length is
sa this length is SB
and uh this is L A and this one is
lb so the equation of the cable in this
case comes out to be y =
to t/
Mu cos hyperbolic mux / T minus1 and
this is the
equation of
kenary okay
here this
mu was the
weight per unit length of the
cable okay and the tension T in the
cable was t =
t² + mu ²
s² or t can also be calculated using tal
to T cos hyperbolic mux / t or t = t +
mu * y now the length of the
cable okay let's say s a or SB
so s = to T not/
mu sin hyperbolic mux / t not so you
calculate this for sa and for SB and
then you sum them up to find out the
total length we next discuss
trust trust is a
framework which
is composed of
members which
are joined
at their
ends to
form a rigid
structure okay and uh the basic
element of a PL
tress
is the triangle
okay so if you want to make a
tress you have to use three
members which are joined together and
then you can extend this to make bigger
trust now if the
members in the trust are
M the joints are J and
the support
reaction is R
then if m + r is equal to 2J in that
case the
trust
is statically
determinate that means we can find out
all the forces that are acting on the
trust and if m + r is larger than 2J
then the TR is
indeterminate okay now there are two
methods to uh find out the forces in the
truss so one is the method of
joint okay and this method is more
effective when you want to find out the
force in all the members
okay when we want to
calculate the
force in all members of the tress
the second method was method
of
sections and this method
was more
effective
when we want to
calculate the
forces in
only one
or very few members of the
trust let's say we have the following
trust so this point is a b c d e and
f and
at
e there is a roller support and let's
say there are external forces also
P1
P2 and P3 then in method of section you
divide this trust into two complete
part and we divide it such that it does
not cut more than three members because
we have three independent equations okay
so therefore
when we cut this we have the following
free body diagram of the tress on the
left hand side
okay and then we use the equilibrium
condition to find out the forces in the
trust
okay we next studied the principle of
virtual work
and the statement of the principle of
virtual work is
following if a rigid
body is in
equilibrium
then the total virtual work
of the external
forces acting on the rigid
body
is
zero for
any virtual displacement of the body
okay so that means Delta U should be
equal to zero let's say the external
forces p q and a moment m is acting on
the rid body then if Delta X is the
virtual displacement corresponding to
force P Delta Y is the virtual
displacement corresponding to Force Q
and Delta Theta is the virtual
displacement corresponding to the moment
M then PDX + qdy + MD Theta has to be
equal to zero now the next step is to
represent this Delta X Delta Y and Delta
Theta in terms of generalized coordinate
so your x y and Theta they
should be
represented in generalized
coordinate okay and what is generalized
coordinate well the generalized
coordinate are the
least possible coordinate
which completely
define the
position of the
system okay for example for a simple
pendulum the generalized coordinate is
Theta and the degree of freedom is 1 we
then studied the stable and unstable
equilibrium
okay so let's say we have a particle on
the following
curve let me denote the minimum and
maximum point on this
curve okay then A and C represents the
point
of is T
equilibrium and B and D they denotes the
point
of unstable
equilibrium so suppose you displace the
particle from point A then it has a
tendency to come back therefore at Point
a the equilibrium is stable while at B
if you displace it slightly it is not
going to come back okay so there for it
becomes unstable equilibrium and uh to
find out the stable and unstable
equilibrium you find out the first
derivative of V with respect to the
generalized coordinate and put it equal
to zero and for a
stable
equilibrium your
d2v over DQ ² should be positive and for
un stable
equilibrium d2v / DQ ² should be
negative note that here Q is the
generalized
coordinate we next discuss the
friction particularly the static
friction and kinetic friction
let's say I have a rigid body on a rigid
surface and the mass of the body is mg
in that case the normal force n is going
to act upward let's say you apply the
external Force P then the frictional
force is going to develop and if you
plot the frictional force as a function
of external Force p
then uh
initially the f is going to
increase okay it attains a maximum
value so F Max which is equal to Mu * n
and then the
body start to move so in this case you
have static
friction and here in you have
kinetic
friction okay and this is the point
where in the motion just begins so this
is the point of impending
motion the value of the static friction
is Mu * n and
similarly the kinetic friction is equal
to Mu K * n okay we also studied the
force
acting between ropes or
belt
and
frictional
surfaces okay so for
example suppose I have a peg
and on this Peg I have a
rope okay let's
say you have a weight w which is
suspended like this and it is held by a
force P
okay so let's say this is is T1 and this
is T2 then we got T2 equal to T1 e to
the power mu
beta where T2 is larger than T1 and
beta is the
angle in
radian between
the
belt and
the frictional
surface okay so for
example you have this circular surface
and you have a belt like this then beta
is the angle that the belt is making
with the surface now in this case if my
T1 is larger than T2 so if T1 is larger
than T2 then the same formula is
applicable but now we have T1 = to T2 e
^ mu beta so finally we discuss about
the rolling
resistance and here in we assume that
the deformation is there in the body as
well as in the surface so suppose I have
a body and this body is rolling
so the surface and the body they deform
the deformation in the
front
it retards the
motion and the
deformation in the back it assist the
motion okay however the
is always larger than the
propulsion and because of that the
normal force n
has a horizontal
component and because of that you have
to apply a force to keep the wheel
rolling at a constant velocity okay so
the situation is following you have this
wheel and
uh we
have the normal force n which has a
component along the horizontal its
weight is w and you have to apply a
force F so that this wheel is keep
rolling at constant velocity so to
keep the wheel
rolling at a constant
velocity we
require a
horizontal Force F and this Force f is
called the rolling
resistance
or the rolling friction
okay now let's say a is the point of
application of uh this Force n and a
small a represents the horizontal
distance between point a and the
vertical line of center of the wheel so
let's say this is a then a is called the
coefficient of rolling
resistance or a by R is also called the
coefficient of rolling resistance and
the value of f comes out to be a/ R into
W or mu R into W where mu is the rolling
resistance with this let me stop here
see you in the next class wherein we
will start the discussion about the
Dynamics part thank you
[Music]
