How a Denver Distillery Uses a One-of-a-Kind Process to Make Their $250 Whiskey — Vendors

Brandy Channel
12 followers
Leopold Bros. is an independently owned distillery founded by two brothers in Colorado. With one brother specializing in malting and brewing and the other specializing in environmentally sustainable engineering, together they produce 1,000 barrels of whiskey a year, bringing back processes not used since before Prohibition.
#wineculture, #brandychannel
We're the only distillery in North America that makes 100% of their malt.
We make millions of pounds per year for our use on site.
The three-chamber rye whiskey is basically a revival of a style of whiskey that completely
disappeared after prohibition. We produce about a thousand barrels a year and we're distributed
all throughout the United States and a little bit into Canada. We're starting with a couple
of raw grains here. This is raw barley that we get from Colorado and malting barley is
different than for cattle feed. It's much higher quality. It's lower in nitrogen.
It's really been tailored to the environment in Colorado, which is very dry. And then the
raw rye that we have is called a bruise rye. This was actually brought over from Italy
in the 1800s. The bruise rye disappeared because it has such a low starch content
and modern distillation and brewing has been pushing for higher and higher starch content
at the expense of flavor and aroma over the years. It's an intensely, intensely floral
variety of rye that just makes remarkable whiskey.
Floor malting is the traditional way to make malt. The entire floor malting process takes
about a week. The purpose of the steeping process is to hydrate the grain. The idea
is to trick it into thinking it's in the ground so that it begins the germination process and
starts to turn into a plant. There are fewer than 10 distilleries in the world that make
their own floor malt. And the reason is it's so labor intensive. So this is Danny. He's
our head maltster. He handles everything really on this side of the building. So this grain has
been sitting for a matter of a few days. Today, really what I'm looking for is just a nice,
healthy root. These roots start kind of growing together. And to prevent that, we drag these
gerbers through the pile just to kind of break up those rootlets, break up some of the CO2
and the heat that's happening during the germination process. The embryo, it's
synthesizing enzymes to break down the starches and other components. And it's those enzymes that
are used in the mashing process to convert the starches and the sugars. You can order
enzymes out of a jug and pour it in the mash tun. That's not necessary. We're in the very last part
of the process, anywhere between four and six days on the floor. You can see how grown those
rootlets are. So this little temperature difference between the top and the bottom
gives it a little bit of unevenness. It's making it so that there's layers of aroma that you don't
get using modern automated malting. So we're going to lean into the differences in the seasons
and breathe as much life into our whiskey as we possibly can. We're going to use this sled and a
wench. I'll move it into the kiln over here. Definitely gives us a lot of hands-on control
in a kind of a chaotic process. We call this Colorado CrossFit here. It's a lot of shoveling.
This is the last step in the malt journey. It's called a doig style kiln. The shape and the size
of it's really traditional to a kind of old world style malting and kilning of cereal grains. We're
going to fill this area up with hot air and we're going to bring it from about 50% moisture content,
drop it down to about 5% by the end of its kilning process. We can go all the way up to 103
Celsius in this kiln, a little over 200 degrees Fahrenheit. Start using that Maillard reaction to
get some of those nice biscuity notes, getting some really, really deeper flavors in the kiln.
Now that we've got our grain modified and kilned, it's all nice and dry, we're going to bring it
through a series of cleaners. This is going to do vibration and two different size screens.
The grain itself is going to fall through here and then out to the silo. And being kind of a
zero waste facility, we send all of our agricultural rejects to farmers and ranchers
as cattle feed and feed their horses. The next step in the process is going to be to mill it,
so we can actually turn our grain into flour. It's just a bunch of hammers that run around
really, really fast. When the grain comes in, it just kind of pushes that grain up against
these screens and just pulverizes it. So if we pulverize that grain and just completely
bust out all of those starches, the yeast has just got a ton of food to attack.
What we're going to do is bring all the flour and mix it in with some hot water,
put in this mash tun and let it sit for about 45 minutes. The temperatures we're using in that
water are going to start activating those enzymes. We're talking about 140 degrees Fahrenheit, so it
can start actually breaking down those starches. After that, we're going to drop the temperature
down as quickly as we can. The 60 degree mark is kind of right around where the yeast really
likes to really ferment. And once we've got it to the right temperature, we're going to transfer
over to fermentation tanks. What we're doing with these fermenters is trying to breathe as
much life in here as possible. So we've got wild yeast and bacteria that's accrued here
for over 10 years. This wouldn't be sanitary for beer, but we're going to take this and we're going
to distill it. We're going to turn everything that's in this fermenter into a gas, so you don't
have to worry about that. These are open cypress fermenters. It's a softer wood so that when you
fill it with liquid, it seals. So there's no nails holding this together or glues. This is being held
together by the pressure of its swelling from the liquid that you're putting into it. These things
will last much longer than I will, which is pretty exciting because the microbiology that's going on
in this wood itself is going to make the whiskey a little bit more complex as the decades roll by.
That's going to be a little bit over 12% sugar, so that's going to be nice and sweet.
We're intentionally splashing as we're pumping it in to generate a little bit more oxygen into
the mash so that the fermentation is a little bit more aggressive and thorough. And what that's
going to do is create daughter cells. Crank is going to come along and add the liquefied yeast
into it. He's our production manager and he's been with us for over a decade and his shift starts at
3.30 in the morning. He's been in for over 10 years. He's never been late once.
There are hundreds of yeasts that you can use to make both whiskey and beer. We use a mix between
them to get more nuance and finesse into the whiskey. Yeast is what's called a facultative
anaerobic, which means once the oxygen is done, it switches over to fermentation. Instead of
creating daughter cells, it's going to consume that sugar and turn it into alcohol and hopefully
some really delicious flavors. All works in concert to make a whiskey that's going to be
ready in another 10 years. We have a total of 16 fermenters in our cellar. Open fermenters,
you're basically saying that you want mother nature to have a little bit more say in the
finished whiskey. This is yesterday's mash. So this is about 24 hours later. This is what's
called high croisin, which is just saying really its most active state. So this is probably five
or 6% sugar right about now. After the decades of doing this roll by, you can tell when there's
an issue simply by looking at the pattern of the foam. So now you can see another 24 hours has
passed. It's dying out, which tells me there might be 1% sugar left here, maybe. But the sweetness
is gone. It's nice and dry. This is normally when we'd be running to the still, but we're going to
let this sit for an extra 48 hours to let what's living in this wood get to work on this mash.
So that leads to the last day that we have here. So now you can see that this is really dead in
the water. Really nothing's happening at all. Malt has lactobacillus living on it. What's going to
happen is it's going to start to drop the pH and it's now starting to get noticeably sour and those
organic acids are going to turn into esters that are going to taste like orange marmalade and plum
and fig and add depth to the whiskey as we distill it. So as the years and the seasons roll by,
we're going to get more and more complexity. I went to German brewing school many years ago
and opening up a brew pub with my brother. He wanted to make what's now called a sustainable
factory. That wasn't even a word back then. He went on to Stanford to get his master's in
environmental engineering. We're incredibly lucky because our two skills fit together
and it's just been a wonderful partnership. We added distillation just two years in to
diversify what it is that we were selling and once I got my hands on a pot still I fell in
love with it. This is the only three chambers still in the world that's being used to make
rye whiskey. This is about 20 feet high, five feet in diameter. We had this built for us about
eight years ago now. So as you can see here in the bottom chamber, the alcohol laden vapor is
going to travel up and bubble up through the second chamber. It's going to repeat that process
through the third chamber. It's going to go up through a preheater, come over in a line arm
here down into the thumper and from the thumper it runs over into our condenser
where you can picture a pig's tail that runs down the center of that column
with constantly circulating cold water running. So you have a hot vapor hitting a cold surface
and it condenses and comes out as alcohol in our spirit safe. You turn that into a modern
continuous still. You could get about 200 barrels a day. This yields two. The continuous
still, the mash enters and exits the still in 90 seconds. For a three chamber still it's in there
for a total of 90 minutes at 30 degrees hotter and as a result it pulls oils and aromas out of
the rye mash that you can't get using a continuous still. Lavender notes and rose notes and all of
these big big floral flavors and aromas out of the rye and it makes it so the whiskey is
completely different from any other modern rye whiskey. So we're taking a new charred barrel.
It's been charred on the inside. So what we have here is the tank full of the new make spirits.
We're going to dilute it to 50% alcohol and then we're going to fill it here in a newly charred
American oak. All spirits are clear as they come off of the still but the beautiful reddish and
brown and sunlight notes that you get in the color of a whiskey comes from taking this wood
and they literally char it. Charring is a distinctively American process and it's a
legal requirement if you want to label it as rye whiskey. The char is imparting color. It's going
to release very specific components and we're using American oak. It's defining characteristic
is a compound called vanillin which shockingly tastes like vanilla. It's also adding sweetness
as the years roll by from the wood sugars that you get. The problem with oxygen working its way
in is that you also have evaporation. We're losing about 4.1 percent volume per year. We're going to
move this into our dunnage warehouse for maturation and basically catalog it and then forget about it.
I mean tell me that's not satisfying. It's satisfying. In here we have about 3,000 barrels
that are maturing whiskey right now. The three chamber rye whiskey ages anywhere between 8 and
15 years. What happens during maturation in our dunnage warehouse is we're taking advantage of
the temperature differences between summer and winter, between day and night. So when it starts
to get cold it's the whiskey is going to contract and pull out of the wood, pull out of the barrel
and when it gets warmer it's going to push its way into this into the wood and this constant
movement of working its way in and out of the barrel is pulling the coloring that you get.
It's pulling the aromas and wood sugars that you're looking for out of the whiskey.
Where you make it makes a difference. The temperature that you age it at and the amount
of moisture that you have in the air dictates the angel share. So I could take this distillery
and put the entire thing in Kentucky and the whiskey is going to be different even if I kept
everything else the same. Mother nature is going to have its say and all we're trying to do is
shepherd it in the directions that we like. I've been in this industry for 28 years now
and my favorite thing to do really is tasting the whiskey as it comes off of the stove.
I mean it's beautiful. There really is no other whiskey like this in the world
and this particular bottling has been in the barrel now for six years. As the years progress
you're getting more and more layers of the esters. It's just intensely floral and the lavender and
the elderflower and the rose together with all that fruit you immediately understand that this
has nothing to do with modern whiskey. It's an entirely different paradigm and we're very proud
of you making it. I started studying the three chamber still and came across it 15 years ago.
I had to take a leap of faith. You can get what are called dusties so these are vintage bottles
and a couple of the whiskey writers, David Wondrich, did a side-by-side with a bottling
from 1913 and mine and he's like Todd my god the notes are all there. That was a very good day.
They have a very small crew that we're very lucky to have who really care about what they do.
That's about eight years of hard work there. How does it feel? Indescribable. I'm the luckiest man
in the world. I can't believe I get to do this. It gets better every year. Our customers most
commonly drink our rye whiskey neat or on the rocks sometimes in a Manhattan. It also makes
really nice old pal. I'm a fan of old pals. It's been a long and hard journey. There's an awful
lot of art to it and that's the part of my job that I just love. Understanding how all of these
puzzle pieces fit together to make something that's delicious. I'm aiming for a target on a
tree that's 10 to 15 years out and when I hit it it's incredibly gratifying. The payoff of adding
these extra steps is we're making unique whiskey. The three chamber rye whiskey is a true unicorn.
It's it. There's only one.
