Building a Bronze Greek Breastplate (Part 2): Repousse and Finishing

Forging the Past
1 follower
2 Video Views·Jul 18, 2024
I continue to work on the bronze breastplate. Using pitch as a backer, I use a repousse technique to create a decorative motif around the collar. After some final refining of the overall shape (which also work hardens the bronze), I then brush the entire surface with gun blue. This takes the entire surface to a chocolate brown colour. I then dip the breastplate in water to neutralize the acid's effects and rub the piece with steel wool while it is still wet.
All right, several hours have passed and I've done more refining on the shape here and I'm at the
point now where every time I do one of these things, and I've probably made maybe 30 of these
in my lifetime, pretty much one a year since I started, and every one turns out different even
though in this case I was following this one as my guide in the process of doing it and looking
back to the original photograph things changed and it's just it gets to the point where you have
to almost abandon it and aesthetically you can really get roped into trying to make every subtle
nuance of this work and it just gets to a point where you have to say good enough. In this case
I'm pretty happy with the way this one came out. I really like the aesthetic on that and I was trying
to go for something that my frame, since I'm an average size guy, this one I found I really like
it was very heroic proportions but maybe a little too hourglass was actually fairly uncomfortable
for me to wear so someone with a very lean waist maybe but I want this one a little more
forgiving I suppose. Look back at this one which I did many years ago and I really like this one
this one's much more stylized this one we're doing here is much more anatomically correct.
Having said that it's still stylized there is I consider every sculpture stylized to a certain
extent the actual working with a certain medium and trying to replicate living flesh there's
always going to be a translation there and that you know I just call that being stylized
so it's not completely like a human form but this is pretty damn good I think and I'm fairly happy
with how I've got this all tucking in here again I talked earlier about this being really the
hardest part to try to achieve this is the compound curve trying to get everything to go
in there and flow out metal doesn't want to conform that way but I think this one is forming
on pretty good everything falls into place fairly nicely there I find the six pack is
relatively easy to do and in this case based on the original there it's actually not overly defined
it's this whole area the serratus that is subtle and very hard to try to figure out what is actually
going on there and get that to work and you're trying to create something that is very aesthetically
formidable I guess is the word I'm looking for that's kind of what the whole aspect of these
things were kind of an in-your-face intimidation factor of having this
muscular guy coming at you so trying to get something that has that the most heroic form
possible like that's where you want to have you know the gut sucked in that kind of whole idea
there and then a little bit of definition this rate is same time I don't really like a fully
shredded like say a bodybuilder that was at five percent body fat you know then everything is
sticking out there to me that looks a little bit I don't know overdone I like the subtlety of this
something a little bit more like me as a natural 115 body fat 18 something like that I think works
a little bit better as a historical model and it actually fits quite well with the piece that we're
basing this on so anyway I'll show you briefly what I was doing in part is trying to get this
sort of stuff in here just trying to get this subtle different landmarks and things like that
so just zoom in here on my steak all right so for example when I'm doing this center line here
I go to my handy ball steak here and just position the abs over there and then just
same thing down in these valleys here and knocking those in now getting your little
bulges coming out there is one thing but sometimes you have to change the plane for example in in
here I needed to drop this piece down so what I actually did was on this piece here I put it
onto a ball and then I have this piece sitting up in the air and once you have that sitting down
on the flat I push this entire bulge and drop it down a level and when you do that then you have
to go back and refine the distortions and stuff like that but in that way you're able to take
things and push them where they need to be and trying to get that hourglass indent in here which
is so critical very subtle stuff and this is where if you don't have an artistic bent this is where
people are going to really be struggling this is not a paint by numbers recipe sort of approach to
something you have to have a pretty good picture in your mind's eye of what you're doing sculpturally
in order to be able to even see and discern the the subtle distinctions that that make this work
good to have a good model or example to work off of but if you're not that sort of artistic
personality then this is probably not the thing for you you're going to struggle with this you
can learn all the techniques and everything like that but to do some of the subtle sculpturing
might be a bit of a struggle anyway I'm assuming that people who are going to be trying this or
have some sort of creative artistic bent and will try their best and see what happens
so once I reach this point I can still see a lot of irregularities and things like that and this
all gets planished out on the little balls on big balls and stuff like that and basically
could just move around and you can spend hours just kind of pushing things down then you got
to watch that as you're doing that that you're not bulging an area out or flattening out an area
that needs to be sculpted so it's something that is really quite exhausting when it gets to this
point everything is so subtle and takes a lot of focus to to make sure you're on the right track
and the planishing could go on indefinitely it's it's kind of planishing is always just
abandoned it's never done so you get to a point you just say **** it you know I got to move on
we're going to polish this actually grind it with sanding discs and things like that to bring it
down and I want to leave some hammer texture in but anyway moving on all right so I decided I
want to Greek this thing up with some decorative repose stuff so I came up went on Google as I
typically do and got some motifs and I kind of like this stylized bull head and both motifs
feature very heavily in Greek art also this little decorative band motif which is similar to
what I did on the Greek shield slightly different variation of it but I thought you know this will
be you know really add a little bit of Greek flair to it I'm not going totally historically
accurate on it but I think it's really going to have at least these are both historically accurate
motifs and putting it on here I think it will come up with something aesthetically quite
lovely so anyway draw this out scaled it up to what I wanted there drew this to everything fits
there and then I went and transferred it onto my transfer paper did the one side there which I can
now flip over and do the other side there so this will give me my point of reference so what I need
to do first is actually pound out a little bulge here I'm going to kneel that I should mention
I haven't annealed this thing in quite a while and doing all the planishing and fine tuning on this
it has worked hard and quite a bit and I'm very pleased this is actually work hard and quite a
bit more than when I worked with brass I haven't worked with silicone bronze too much to realize
that but I think this stuff is probably going to be pretty durable and tough so I've kind of left
it I would like to anneal it again to be able to move things nicer but I wanted it to work hard
so that this thing is actually going to function as a piece of armor but up here I'm going to have
to anneal because I need to get this nice and soft to be able to work with it so anyway I'm
just going to position this on here you can see the way I've done my funky little cut out here
and I just want to get my bowl lined up on my center line trace them out flip it over
all right that just gives me a rough silhouette of where I'm going there now I want to jump over to
my shot bag and put a little bulge in there to replicate that all right so what I've done now is
just pounded out roughly a raised area of what I'm going to be working with my repose and I wanted to
get some depth there because I like high relief when I do it I want it to stand out so just
basically roughing out that perimeter there now I can get the pitch in behind there and start working
in repose fashion to sharpen all that up so I'm going to go over to the forge first I'm going to
anneal this whole thing and then I'm going to heat it up to put the pitch in so I've just got I've
got the heat off actually they're just sitting on the forge just as low heat as I can I don't want
to overheat the pitch and I'm just adding chunks in and letting it melt in there and then removing
it from the heat when it's bubbling too much and just trying to get my little depression
I can only work with a little bit of the area at a time so I'm not going to do
the side wings there I'm sure the camera's picking all this up but anyway
and there we have it I think I'm just going to let that sit now for about 15 minutes
okay I think that will represent the first pass there I've got the bullhead
roughed out now I want to move on and get my decorative border motif in there so I'm
going to shift it onto my holder here and then I can first of all maybe I will draw that out and
then get it get both of these sides just roughed in and then I can I think I'll probably have to
all right I know what you're thinking yeah that doesn't look very good I've got a long way to go
on this I just did this there's there was no backing in there no pitch behind there so I was
just able caving this in to establish my lines here I'll pop this off and then work from the
inside and pop up my little ridges there and then go back in with some pitch and do that so right
now I'm going to get going on the other side here but I don't think you need to see all this
this is going to take me several hours now we'll just jump ahead come back and watch
me as I do the finishing touches on this so I'll see you later all right four hours has elapsed
since we last spoke and the repose has basically been finished I've got my little motif here with
my motif coming up around the side there I'm quite happy with that before I forget I just
want to point out something here is an annealed piece of bronze and listen to that if you listen
to this quite a bit difference and that is work hardening and I left especially this part down
here let that work harden up quite a bit at the end and it was actually getting difficult to move
it around really got quite rigid as to where I wanted to be but I wanted to do that work hardening
to create the functionality of the best potential for this piece of bronze as a piece of armor and
that brings me to my next thought functional sculpture that's kind of my big thing that's
what I'm really into is functional sculpture and I'm more or less I think that everything
I make I consider to be functional sculpture you know whether it's a range hood or a gate or
piece of armor or whatever I think of it as both something that is functional and sculptural and I
really like the marriage of those two things this I think by the most rigid definition falls into
functional sculpture like there's really no denying it it's functional it's a piece of
body armor that will protect the body and actually save somebody's life so there's no denying that
it's functional and there's also no denying that this is a piece of sculpture it's basically an
extension in space it is sculpted in the likeness of the human form so for me this kind of thing
really ticks all the boxes this this is the kind of stuff that really I get excited about making
and I've you know I've done maybe 30 of these in my lifetime and every time it's a fully engaging
process for me it really kind of sucks me in I think you know one of the buzzwords right now
is deep work and also they talk about mindfulness this is it right here for me because it pulls me
right in this is my entire world as I'm working on this and really mentally physically spiritually
you know whatever that taxes me to the to the utmost to get this but this is the kind of stuff
I really like to do this is my crack cocaine if you will this here is back crack so there there
you have it now what I'm talking sculptural wise um my next step here is to do the finish on it I
was going to do a finish like this brass plate here my brass one where I was going to take some
grinders and mechanical polishing equipment and smooth out a lot of the bumps here just
leaving some of the hammer marks in the crevices but looking at this thing as I finished it off
I just like all the hammer marks in it I just think you know I'm really kind of in an artistic
frame of mind at this point and I'd like to see if I can finish it retaining all the the planished
hammer marks in there so that's what I'm going to try to do so we're just going to jump right
into the finishing process here what I need to do is get some gun blue on which is a weak nitric
acid solution and what that's going to do is darken this whole thing up but it's also going
to eat through the soot and stuff that is here from being into the forge and then I'm going to
be able to get the whole thing kind of darkened down and then I will be able to buff out the
highlights using combination of steel wool and sandpaper so I'm just going to do some quick
finishing on this see how it comes out I'm not sure I've done this in the past the contrast
when it freshly happens is not it's a little too stark a little too startling for me but I'm just
going to see how it goes incidentally in the future video we've been doing the back plate
for this piece here anyway so I'm not too concerned about having this finished to a
pristine finish because when I do that I'm going to be using this piece to work the other piece
and then when I get the two of them done I may do a final finish on everything but enough chit
chat here let's get right into the actual finishing before I do that like I said I was
going to it's going to be different than this one here you look at the steel one here this one I
actually did and I used a textured hammer to put pits in this one I wanted it to be patinaed and
I've had this one for several years now and just I polished it a few times and then let it rust out
and then it just slowly darkening up and I really kind of like that look on the steel I think that's
really kind of an attractive aesthetic on there also while I've got the steel and the bronze here
this one I just put it on the scale four and a half pounds for this piece the bronze breastplate
is about five and three quarter pounds so bronze being heavier than steel but not twice as heavy
as I was kind of thinking it felt really quite a bit heavier but it's actually not that much only
a pound and a bit more so bronze is always going to be heavier than steel given the same surface
area all right let's get started so I'll be using the birchwood casey super blue gun bluing and if
you guys are interested in getting some gun bluing then we have an affiliate link should be somewhere
apparently on this on the video here but check that out if you want to help support the channel
if you get it you get get it through us that would be great so check that out all right so I'm just
gonna brush on a liberal coat of gun blue here all right I'm going to go now dip this in water
to neutralize the effect of the acid putting on a dust mask copper based alloys in fine powder
are fairly toxic and something you want to avoid
okay so I'm just uh while it's still wet I'm just rubbing it down with the steel wool here to get
that residue off but I'm leaving the
crevices dark I find when it's wet like this the water helps diffuse
things and you get a nice less scratchy finish on it
and there it is that was about 10 minutes of coarse steel wool well wet and I really really
like the way the finish has come out on there and I think it's really coming along quite nicely
I'm very pleased with that so excited now to be able to make the back plate and get these two
the two pieces together and that whole effect I think it's going to be quite nice
just a cool thing by way of comparison there let's take a look at the brass press plate and
just the difference in the tone of the metal also you can see where I left the hammer toe
marks in here and everything I think it worked I like the effect of it I like the rusticness
of this and the way it plays out here still like this one I think it's great but you know the
comparison from the yellow to that and if I just grab a piece of copper by comparison which I just
quickly buffed up there you can see the hammered copper the tone of copper and then brass and then
bronze laying somewhere in the middle there and I just to me bronze is such a gorgeous uh hue I
just like that to me it's a very magical metal I really like that anyway yeah Eric to pan around
on that well I give you some specs here for all the history nerds so I think it wasn't keeping
total track about 22 or 24 hours to make this piece from from start to finish where we are
right here as I think I said earlier the weight on this was about five and three quarter pounds
at this point without any of the attachments on there so it's fairly heavy in comparison to steel
but not too much more so just to recap the entire process here just quickly so we started out I cut
out my piece of bronze I annealed that and then I dished it into my shot bag and then worked from
the inside then I worked on stakes from the outside using both wooden and steel hammers
and there was a lot of back and forth there several times it was annealed then I rolled the edges then
I did my repose bull on there then I did the final shaping and work hardening which is a planishing
step where I'm doing a lots hundreds of overlapping blows to kind of refine the shape and at the same
time we're carding it and then the finish which in this case was actually very quick and easy
so this is a breastplate of a greek hoplite from approximately 500 bc and in this video I purposely
did not include too much history as I realized from my greek shield video that my historical
knowledge is spotty at best and I will get better research info from the viewers
you guys who avidly study greek history I'm eagerly anticipating feedback from you guys
the guys with the x's and k's and a whole lot of o's in your names I'm waiting for you to get back
to me with some more history and underpinnings for what's going on here so don't let me down
it's my intention after that we do the breastplate and back plate that I want to do a corinthian
style helmet so the bronze helmet then from there I want to do the greaves and then after the armor
the spear the xipho sword I'd like to do that and then basically make an entire kit for a greek
hoplite and we're probably talking a couple years for me able to put this all together so if you're
watching this in real time you're gonna have to be patient if you're watching this in the distant
future you hopefully you can just jump from video to video and watch the entire process so that is
basically it we got lots of other stuff on the go here so please if you haven't subscribed to our
channel subscribe now check out all the other videos we're doing a lot of other stuff you want
to see we didn't show a whole lot of the reposé in this one but if you look at the raven skull
video reposé much more detail as to that process and we've got tons and tons of other videos that
show a lot of the processes that we use here so please check it out comments below all that stuff
this is it thank you see ya
