Electrical Drawing को देख कर Wiring करना सीखे @ElectricalTechnician

Electrical Technician
42 followers
1 Video View·Jun 7, 2024
Friends, through today's video, I am
going to teach you how to do
wiring using any circuit diagram. See at the moment,
here I have a two page
circuit diagram, as you will see a
circuit. This diagram is done and the second one is this one.
Now this is the complete circuit
diagram. According to this, we will
learn to do wiring here, so here is our
first circuit diagram.
In this circuit diagram, you will see that a
symbol has been made here. This is the symbol, this is the
symbol of the contactor,
as you will see, I have a
contactor, the symbol of this contactor has been
made here, now the
circuit diagram which is here, it is being told in this circuit diagram
that Which is our
contractor, to start it,
connect the face supply to the
A1 terminal of the contractor,
as you will see here A1 is
written, connect it with the A1 terminal, that
means this phase The supply
is by taking this phase supply which is
written as a1 here and we have to connect it with it.
After this, which is the neutral power
supply, we have to take this neutral power supply and
connect it with the a2 terminal.
If you are here in the contractor also If you see, it is
written here in the contactor also
a2 means that we have to supply neutral power at this point,
so this is the
circuit diagram, according to this circuit diagram,
we make the connection once,
after that we will follow this.
So in the circuit diagram it is being
said that first of all take the phase supply and
connect it with the A1 terminal, for this I will
take a wire here,
I will take this wire, first of all I will connect it with the MCB,
which is the MCB.
You will see in the MCB that phase supply is connected here and
neutral supply is connected here. At present, if
we want to use phase supply,
then this wire has to be taken and
this wire has to be connected to the terminal with phase supply. The
power supply from this wire will go to the
A1 terminal of the contactor. There is an A1
terminal here, so I connect this wire with it. In
this way, according to
this drawing,
we will take the phase supply with A1. If you have to connect
then we have done that work, now it is being said here that
take the neutral power supply and connect it with a2, then
for neutral I use black wire here
and take this wire
first. So I will connect it with the MCB,
that is, I have connected it with the neutral power supply.
Now
bring the other end of this wire to the
A2 terminal of the contractor, as
you will see here, there is an A2 terminal, so
with this terminal. We
will connect this wire in this way, now the
connection that has been made, what is working according to this connection,
let's see
once, so I straighten this contractor
once, then here is the
MCB, which is this MCB. I turn it on, I
turn it on, here you
will see that my contactor has turned on, which means
that the power supply of the MCB, on
turning it on, the contactor is on and on turning off the power supply, the
contactor here is also
closed, you see this contactor is on. And the
contractor is switched off, what is happening at the present time,
the contractor is being
switched on and off through this MCB, that means the
coil of the contractor, the
terminal of the coil is a1 a2, so
if we provide power supply on that terminal, then the
contractor We will start it,
you must have understood this much, now
look at the second drawing here,
in this drawing also the entire connection has been described as same as
mentioned here, it is same to same
only here at this point. Here,
a switch has been installed in the middle and
this switch is our push button.
If you see this type of symbol, then
you will understand that a push button has been
used there. Which push button is it? Let
me show you this one, we
call it push button. Push button also comes in two types,
one is N and the other is AC. Here N push
button has been used, so the
element which will be placed behind your push button is
N type. Now this push
button should be there, we have to simply
connect it in series between this power supply,
what will we do for this, here which is
our face supply wire, as you
will see, this is the phase supply wire and this is why
This push button of ours was connected in the middle,
so what do I do? Here is my face
supply wire, I cut it in the middle,
here I cut it, now
I remove the insulation of this wire
and remove it. After doing this, I will
take a straight part of that wire and
connect it to the input terminal of the push button.
We can connect it anywhere, we can connect it here or there, there is
no problem, I am here at the present time.
Now we will
bring the second wire of this wire and connect
it with the output of this point.
Here I have
connected this wire. Now this push button
is if we face it. If you connect it in the middle of supply then
what will happen in this condition?
Let's see at the present time I
switch on the MCB.
Even after switching on the MCB, here the contactor did
not switch on. Earlier you were seeing the
contactor on switching on the MCB. It was being started
and on switching off the MCB, the contactor is off
but at the present time the MCB is on and the
contactor is off. If
we have to turn on the contactor then we
have to press the push button as you will see that
if I press it then the contactor. On on
release, off on press, on on
release, off. So at present,
you should understand that
if we put a switch in between the power supply which is being supplied to start the contractor,
then that The
contactor will turn on only after pressing the switch
and after turning it off the contactor will also
turn off. So, this is the second circuit
diagram. We have
made this circuit diagram. Now by further modifying this circuit diagram, we have
made the third circuit diagram here. In this circuit diagram,
you will see that a contact has been placed here,
we call this contact as anode contact. Now whose anode
contact is this, then you will see the
name written here, k1 is written and this
one. The name of the contactor is also k1, now you will see that
k1 is written here too,
it means that the anode contact of this contactor has been
used here,
so how to connect this anode contact,
then you will see the simple method here. The
ANO contact of the contractor should
come before the input power supply start push button and from this ANO contact the
power supply should go to the output of the start push button.
So this is the circuit diagram. According to
this circuit diagram, we
make the connection here. Look at the
contactor here, the Ano contact of this contactor is
given here, as you will
see, it is written here on the top of the contactor,
Ano, this is the N contact, this is what has to be
used,
we use the Ano contact for on indication.
Or we use it to hold a contractor.
Okay, so
this is terminal number 13, on this we have to
provide incoming power supply, that is,
what we have to do is to
connect the wire to the push button where this push button is located.
We have to connect one wire with the same one.
Before connecting, we have to
switch off the power supply.
After switching off the power supply,
we will connect another wire with this same wire. In this
way, now these wires We have connected the
other end of it, we will take it
and on the top of the contact where '
ano contact' is written, that is, where 'N' is
written, we will connect this wire with it, in
this way, now the 'ano
contact' Output is, we have to
take a wire from that output and connect it to the input of this push button, that
means
we have to connect the wire from both the sides, so for
this I use this wire
and by taking this wire, the contractor's
Here AO is written, here the
terminal number 30 is the one with AO and here there is the
terminal number 14 which is N, so
on the terminal number 14 I have connected this one,
now take this wire
which is our start push. There is a button on the
other side, we will connect this wire to that side. In
this way, this is the
third circuit diagram. According to this circuit
diagram, we have
made the complete connection. Now let us see what will happen in this connection.
First of all I
turn on the MCB. After turning on the MCB
nothing happened here
but as I press the start push button here
the contactor is on and
here I have released the push button also
here. The contactor is
on, now I can't turn it off,
I don't have the option to turn it off, to turn it off
we use the stop push button,
but we have
not yet connected it, now if I turn off the MCB which is here. If I
turn off the contactor, then if I turn it on again, it will
not turn on. To turn it on again, I will
have to press the start push button, then my contactor will turn on.
Now in this circuit, if I have to turn
off this contactor, then the MCB.
I will have to close it only after closing,
my contractor will pay off here, so this is the
circuit diagram. According to this circuit diagram,
we have completed the connections. Now
after this circuit diagram, I have
another circuit diagram here.
We will follow this circuit diagram and will
learn to do complete wiring according to it.
Okay, but before proceeding further, I
would like to tell you that if you want to make this type of
circuit diagram or this
type of wiring, then we will make that wiring.
How to do it step by step,
if you want to learn it in complete detail,
then for this I have a course, the
name of the course is Electrical Wiring
Master Course. In this course, I have
explained in such a good way that the
circuit diagram is Looking at that circuit
diagram, how will you do the
wiring? Apart from this,
if you have to make any modification in the circuit diagram, the
meaning of modification is that as you
will see here, I have this
circuit diagram
here in this circuit diagram. And it has been modified, a
timer has been installed here, so if
you are asked to do some more work, then
how will you do it, I have
told about it in that course also.
Apart from this, if you have any
If there is any problem in the starter, then
how to follow the circuit diagram to solve the problem of the starter,
you will learn that also through that course. The
fee of the course is only Rs. 499.99. I will
teach you so many great things that you will not be
able to learn even after working for three-four years in the company, so if you want to learn while staying in the company,
then do not join the course at all
and if you want to learn it in just one month. If you want to
become a perfect electrician, then for this my
course is worth 99 rupees and the name of the course is
Electrical Wiring Master Course.
You can join this course.
I have given the link of the course in the description.
Apart from this, this is my course. The mobile number is,
you can call on this mobile number and ask for the link of the course
and if
you want any information about the course, then you
can talk to me directly. Okay friends, the
course is very excellent, very awesome
if you see. So you will know.
Now let us
further modify this circuit. Now
in this circuit diagram, you
will see that the old circuit is same to the same
but in the present time, there is a new
electrical device here.
Now see what is this electrical device.
If you
go to do wiring using the drawing then you should have
knowledge of electrical symbols, so here I am
telling you that this is a contactor,
this is a push button, this is your anode contact. Now
another new symbol has come here.
We call this symbol the symbol of timer. There are
many types of timers
but at the moment the symbol you are
seeing is the symbol of on delay timer,
so here we call it We will have to use an on delay timer
and this timer will have to be
connected to the output of the power supply N contact
and we will also have to give neutral supply to this timer.
Neutral supply will
go to a2 terminal and phase supply will come to
a1 terminal. Where will the phase supply come from?
We can connect this wire to the output of the push button or to the output of the anode contact which is our anode.
Here you can see the complete circuit diagram.
Apart from this, there is another modification here, let's
do this. Okay,
so at this point of time, I have to use a timer here,
so this is the
timer I have. Now if you look at this timer, it is
written here as a1 and at this point
a2 is written, so where a1 is written. What has happened is that
there we have to provide phase supply
through the output of the push button or through the
anode contact of the contractor
and on the a2 terminal we have to provide neutral supply,
so first of all we
provide neutral supply,
from where? The MCB will be connected to the neutral supply from that MCB
or we can also connect it to the
neutral supply given to the contractor
or if we want, we can cut this wire
in the middle as it is a very long
wire. So I cut it,
after cutting I will join it together
and after joining, I
take it and the timer here, this timer has
a2 terminal here, so on the a2 terminal
I directly connect it. I will do it in
this way, meaning what is happening at the present time,
through this MCB,
neutral supply came to the timer and
by looping a wire from here, we
gave neutral supply to this contractor also,
meaning that the contractor also got neutral
supply. Getting it and the timer has also
started getting neutral supply. Now
here we have to connect the face supply.
So to connect the face supply, it is
mentioned in the circuit diagram which is
our start push button. Bring the wire from there and
connect it. Or
we can provide power supply to this timer by taking the wire from the output terminal of the anode contact of the contractor,
so at present we use this anode
contact, so here
I have the contractor. The
output of this contactor is as you
will see, this is the push button. I will show it once. The
power supply to this push button is
given from here and its input power
supply is given here, which means that it has been
input. Now its Where will the output be
here because its output is here,
then from here the power supply has
gone to the a1 terminal of our contractor.
You will also see in the circuit diagram
that the power supplied on the a1 terminal,
we can also do looping of the same power supply. This
means that we have to provide power supply from this point from
where the power supply is
also going to the a1 terminal of this contactor
and from this point the power supply is going to this ano
contact, that terminal is this one and
this terminal is this one. Now I
connect one wire, now the
other end of this wire has to be taken and
connected to the A1 terminal of the timer, so there is A1 terminal here,
so I connect this wire with it.
In this way, this is the
circuit diagram. According to this circuit diagram,
we have made complete connections here.
Now after making the connections, let us switch it on.
First of all, I switch on the MCB here.
After switching on the MCB,
So here neither the contactor has turned on nor the
timer has started. How did I know that the
timer has also not started? For this, there is
an on indicator installed here. If this
indicator glows then we will understand
that the power supply to the timer has gone like this.
That if I press the start button here,
you will see that
the indicator has started glowing, which means
that the power supply has gone to the timer and
here our contactor has also started.
Now after some time you will see that
Here a light has turned on. This light
tells us that the
time of the timer has been completed and the
AO NC contact of this timer has been changed.
How does it change? How does the timer
work? I have taken the course. I have told you that by
joining the Electrical Wiring Master Course, you can understand the complete things in detail. At
present, the
power supply is running on the timer and the
contractor is also getting started. Now whether the
contractor has to be switched off or else. If you want to
stop the timer, then for this you will have to close the MCB.
After closing the MCB,
see the next circuit
diagram here. This circuit diagram is also
similar to ours, only here we have
one more electrical device in this place. Have to be
connected as you will see here
in this circuit diagram,
another electrical device has been connected here,
now what is this, see here it
is written kt1 and in this timer
you will also see it is written kt1. This means that the
NC contact of this timer is being
used here so that
after its opening the contactor will automatically close.
Now I will show you practically how it will close. At the
moment we have to
use this NC contact
and this NC contact
What have we done to make its connection? The phase
supply here was going directly to the contractor,
in the middle of that we have
connected this NC contact, which means that the
contact of the timer will come in the series of the contractor. Let
me tell you how it will come. At the present
time, here we will see that
this wire is
going directly to our contractor,
like it is going to the A1 terminal, this wire has to be
cut in the middle, after cutting this
timer. The connection has to be made using the NC contact of the wire. At
present, the length of this wire is short,
so what do I do? I
remove the connection made here. Okay,
I removed it from here. After removing.
I will take this wire and
connect it with the timer. Look, here is our
contractor. We have to use the
NC contact of the timer in series with the A1 terminal of this contractor,
so
I will take this wire and take this wire.
Go to the common terminal of the timer. The common
terminal is its terminal number 15.
If you do not know then
look at the circuit
diagram. You will see that here the
terminal number 15 has become the terminal. The
common terminal should be 16. It is NC contact and
terminal number 18 is
ANO contact, so we do not have to use terminal number 15 and 16 here.
First of all, we have to connect the power supply to terminal number 15,
so I am using
this one here. By taking the wire which is the
number 15 terminal of the timer, that means I have
connected it to the common terminal,
now I connect this wire with the NC contact of this timer.
Now I connect this wire with the contact of this timer.
NC contact is there,
I take a new wire along that contact and connect it here.
Now there is the other end of this wire, it has to be
taken and the A1
terminal of the contactor is at the
same place from where we have removed the wire. If you have to connect it,
you will see here that the
power supply from the output terminal of this push button is
going to the timer, then after returning from the timer, it is going
directly to the A1 terminal of the contractor, which
means that the
power supplied to the contractor.
That power supply will now go through the NC contact of the timer.
Now
before telling the working of this circuit diagram, I
would like to request you that if you want me to
make the second part of this video, then please read this. For this,
you have to comment in the comment box
Electrical Circuit Diagram. You have to
write here Electrical Circuit Diagram and
this is the comment. There should be at least 100 comments.
If less than 100 comments are received then its
second part is not going to be made at all.
I am working hard to
give you good videos but
you are not able to make a small comment.
If you have watched the video till now, it means that you are
liking the video then do
comment. You have to do electrical circuit.
Diagram: If all of you comment
and the comments reach 100 plus, then I
will make a second part of this video and I
guarantee that the second part is
going to be even more fun, which means
you will get to learn even more things.
It is in the second part, so if you
want the second part then you will have to comment. So
our connection here has been made.
Now let us
check it once. So, first of all, I
switch on the MCB here.
After switching on the MCB, at this moment you will see that
neither the contactor has started nor the
timer has started. Now I press the start button.
You will see that the contactor is on. The
timer is also on but after some time you will see that the
contactor has automatically switched off.
Why did it stop because
in our timer, we have set the time,
whatever time we set here,
after that time,
this NC contact will break and
after the break, the power of this contact will be switched off. This will
stop the supply due to which
our contractor will be shut down. So
you must have understood this much.
If you want to set the time in the timer then simply
rotate this knob. I have
set the time of 10 seconds here.
Again I press the start button here,
you see the contractor is on, the timer has also started, as
soon as the time of the timer is completed,
this contractor will automatically stop, wait for
10 seconds, the contractor is completely off, started
again, the contractor is on, the timer is
running. As soon as the time is completed,
our contractor will be closed,
so you have watched this video completely
and after watching it, I can say with guarantee that
you will never forget the explanation I have given you here through the circuit diagram.
No, if you want to learn more in detail,
then for this, join my course,
Electrical Wiring Master Course.
I guarantee
that your knowledge will get a
huge boost in that
course. After completing the course, the
fee is only Rs. 99. At such a low price, I am
going to give you a lot of knowledge which
you will not get even after working for two-three years. I
hope
you liked this video. thanks for watching
