Lecture 36 - Field Demonstration of GPR - Part 1

IIT Kanpur July 201
20 followers
Jun 6, 2024
[Music]
hello hello everyone so uh today we will
be discussing about the geoh physical
method that we we that we will use for
image the subsurface near subsurface uh
geology for the region so till now we
have already seen the uh surfacial
topographical mapping of the uh region
using the topographic uh using the total
station and uh rtk so uh today uh this
is the geophysical instrument that is
very handy and we can a single person
can easily uh take it into the field and
perform a survey and uh so the basic
principle behind uh the instrument that
we we will be discussing today is ground
ground penetrating radar that is the
short form is GPR so uh the basic
principle behind this uh instrument is
that uh the high frequency radio uh uh
electromagnetic waves are transmitted
into the subsurface and which get
reflected from the target due to the
difference in the electrical properties
of the subsurface and that is uh once
again uh detected by the receiver
and that receive that signal that we get
from the subsurface that is displayed in
the into the rarr so uh the basic
principle uh behind uh these the
electromagnetic wave propagation deals
with the Maxwell equations so there are
total four equations that deals with the
uh propagation of uh electromagnetic
waves so uh I hope you all must be aware
of the Maxell equations and the farad
laws so uh for the better understanding
of the basic principle behind it you
almost should read about it properly and
uh so that you can easily understand
about the basic working of the
GPI so uh uh today the purpose of the
lecture will be that the topics which we
will cover in the lecture is uh how GPR
work secondly we will discuss about what
we can detect through the
GPR uh what is the penetration depth of
the GPR and uh uh what are the
parameters that we should keep in mind
during the acquisition of the GPR
profiles and how to acquire 2D and 3D uh
data set in the field and uh what are
the advantages and disadvantages of the
GPR
technique so one by one we will discuss
all these things so uh the first uh
thing is how GPR works so as I have also
uh mentioned earlier that uh we emit uh
the GPR emits high frequency that is
that is that range is from 10 MHz to
2,600 MHz into the subsurface and uh due
to the dialectric properties that is we
call as the dialectric constant or the
dialectric permit permitivity of the
subsurface uh there should be the
contrast between the medium and the
target material that we are targeting
the electromagnetic waves will reflect
back to from uh to the sub uh to the
receiver and these signals we capture it
and we analyze it into the radar gram
and uh uh the dialectric properties I
mean to say is that uh the property uh
dialectric permiability is the property
of the material that uh which defines
that uh which defines as uh how much
electrical charge it can hold
uh so uh if there is uh completely like
suppose if there is metallic uh metallic
the our Target material is metallic part
and uh the medium property like uh uh
the subsurface soil so there will be a
drastic contrast between the Target and
the medium so that can that can be
easily captured through the GPR uh so uh
the the material that we can easily
detect through the GPR are like like I
said metallic wires metallic pipes
plastic pipes and uh uh the geological
variation in the subsurface although
there will be a very minute change but
if there is a drastic change in the
geology that we can easily detect from
the GPR and uh uh other we uh things are
like if there is some uh excavation part
that has been done and uh that the
refill part
can also be easily detected from the uh
from the GPR radar gr apart from that we
can also uh apart from that we can also
detect the concrete part or the concrete
uh like that that can be used in the
archaological surveys uh so that we can
find out the uh the buried walls wall
structure or concrete structure uh so it
has a huge application in the
archaeological geological and
geotechnical uh
surveys so basically the resolution of
the GPR if we talk I if we talk about
the resolution so uh it is a rule thumb
rule that at least the target layer that
we are trying to detect it should be at
least 1/4 of the wavelength of the uh
incoming uh wav lent that we that the uh
frequency that we we are using as a GPR
so uh the wide range of frequencies that
we can use through the GPR that is I
that I mentioned that we can use from 10
gahz uh 10 MHz to 2600 MHz so for
today's lab we will be using 350 MHz uh
GPR so this is this we can see that uh
this is 350 MHz GPR it is having it is
easily we can move it through the cart
it can be easily used uh at any area
that we can use uh that we we want to
map and in this you can see
that in this unit this is the shielding
so that the electromagnetic waves that
are generated that cannot go into the
atmosphere and uh uh within this
shielding or the case uh there is
transmitter and receiver so through this
into into the sub subsurface the
electromagnetic waves are propagated and
received back to this survey uh to the
to this receiver and the whole result is
uh transfer the signal transferred to
the uh tough pad that we are having that
I will show you in a short time uh and
once uh on the
right on the right side of this wheel we
are having there is a odometer fitted in
this so uh it can clearly indicate how
much distance you have covered and how
much area you have covered through this
so now I will show you the different
components of the GPR so uh this is our
I have uh this is the tough ped so it
can be easily latched onto the cart uh
so I will show you this is the tough ped
so this is a mini computer kind of thing
so uh the whole data that we are
acquiring that is getting transferred to
this uh uh tough pad and we can easily
analyze and interpret through this uh
display or the computer so
to latch it we can fix it and through
the through this we can latch easily
onto the screen and it can be easily
taken for the survey so uh to start with
so uh the this is the case in which uh
Our receiver and transmitter is there so
the components I was discussing about
the components of the GPR so uh in this
you can easily see that this this is a
gssi 350 hyper stting uh stacking uh
hyper stacking uh this is the frequency
that is given and Hyper stacking is uh
the number of data or the scans that it
is it will be capturing that is uh the
number of stacking is very high so uh
the the level of noise will
be uh will be reduced uh using the hyper
stacking feature of this and uh this
this is specialized for the utility
scanning and uh as this is the slot for
the battery so uh this kind of battery
is attached to this and uh this this
this cable that we are seeing that this
goes to the this this is for the
odometer and uh the connection to is it
is it is going to this wheel so the
odometer is connected to this wheel and
uh uh the connections uh if I can uh
tell you is this is for the
communication so so uh from the the the
data that we will be receiving uh in
this unit that will be uh that will be
transmitted to the uh to our uh tough
pad using this uh port and this cable
will go from uh this uh this unit to the
tough pad and
similarly this is for the power so this
will connect to the battery and this uh
will be connected to this port this
power p uh
Port uh so uh I will attach
this so uh we have connected the cables
and I am now connecting
the
battery and this this is for the
communication so uh using this cable we
can communicate with the tough
pad so here we are having a port so uh
this will be latched to this port for
the connection
so I have connected the all the cables
and the communication in in the GPR unit
so uh as you can see right now there is
no light uh blinking in this and as soon
as I power on the screen the tough PAD
as soon as I power on the tough
pad so you as you can see that the power
light has been uh uh is uh is popping
out and uh as soon as the communication
will be uh connected to uh between the
GPR unit and the tough pad uh so blue
light will be popped out so as we can
see now our unit is ready for the survey
so uh
and this is the shielding this is very
important because uh from the outside of
the from the surrounding region so there
will be the input uh electromagnetic
waves which can interfere between the
frequency of uh GPR uh so the shielding
is very important
[Music]
so this now we can latch it
out and it should be noted that the GPR
unit that is the receiver and the
transmitter it should be in constant uh
contact with the ground so the distance
between the uh receiver the unit and the
ground should be very minimum so that we
can uh the the maximum part of the
energy gets uh into the subsurface and
we can get the high resolution GPR uh
radar gram so as you can see this is the
starting uh screen of the uh GPR uh Sur
unit so you can see that uh this is
utility scan for for dual frequency and
utility scan hyper stating so we are
having a 350 hyper stacking uh unit that
is the frequency of the antenna and uh
this is for the power button and the
symbols this we can see this is uh for
the battery of the unit this is showing
and this is uh the space that is there
in this uh storage uh uh storage of the
uh tough pad and this symbol is for the
battery of this tough pad uh and if this
is blinking this will be blinking orange
so that means the battery is low so uh
at least around 4 hours it can easily uh
go if it is uh fully charged and uh to
start we can see that press press A1 to
start so as soon as
we press this so we can see that
there is a green tick that means there
is a uh proper communication between the
uh unit and the uh and the tough ped the
mode is
2D So currently the mode is on 2D we can
change the mode through this mode button
as we touch it it can it will change to
the mode to the 3D So currently we will
show you how uh we can acquire the 2D
data so the other tab that is showing
that is the playback only so if we want
to see or preview the previous data that
is stored in the system that we can view
through the playback only menu other is
the new new project if we want to create
a new project then we can click on this
tab and a new project will be created
and if we want to see the our last
project and its setting we can choose
this from this tab last project tab so
uh right now we will choose the new
project so uh uh here we can see that
whole directory has been opened and we
will uh give a new data
path and this is the keypad and we can
give
lab
practice
2D
so we can see now
our GPR has been started and the uh name
of the lab the the the the data that
will be stored is the the name of the
file is labore practice 2D so this is
the typical uh radarr that we can see so
this is these are the signals that we
right now it is acquiring and uh until
and unless we will uh press the start it
will not record it but right now it is
running so to save the file or the start
the uh survey you can uh press on the
start tab uh to start the survey so uh I
will I am not starting
right now so uh this is the osilloscope
that we will see or the wigle plot so uh
this vle plot is means like how how much
energy is getting uh transmitted to your
uh subsurface so this the quality of the
signal that is transmitted within the
subsurface uh that can be accessed
through this plot so this is uh kind of
showing the electromagnetic wave and and
its positive and negative uh polarities
so the positive polarity will be plotted
as blue color and the ne negative
polarity will be plotted as a red color
so uh this is the propagation of the
wave that we can see so it is the
overall propagation is uh combined to
one scan that we can uh that we are able
to see on this so we have
to adjust the signal within this uh
portion so the our signal should not
cross this portion that is the + 2.25
and
-25 uh bar that we are seeing so we have
to adjust our for the for the better
interpretation or the better acquisition
of the signal we have to adjust this to
between these bars so uh uh if we can uh
so here we are having few options so uh
we can adjust this wiggle uh using the
signal processes and other tab we which
we are having that is the output options
and system
options uh so one by one we will go
through all these so in Signal process
we can see
scan gain filter line track and
maintenance so
to give the input parameters to our
system as I have talked about the target
depth the the penetration depth and uh
the dialectric constant and the or the
dialectric permitivity so uh that can be
uh adjusted using the scan tab so uh
based on the target depth that we want
to uh acquired the data we can change it
so the maximum depth is through this
unit is 10 m that we can use but as soon
as we will go deeper that is the 10 m
depth if you want to that the resolution
will get uh the the the signal will get
attenuated and the resolution will be
less so uh the uh the purpose of this
unit specifically it can give a high
resolution data till 4 to 5 m
so uh we will keep it at 4 M for the
this and uh dialectric constant also you
can uh you you should be aware before
before getting into the survey you
should be uh knowing about the uh
overall uh geology of the region at
least you should know that how which
what kind of lithology I am going to
encounter roughly so based on that we
can give the dialectric constant so uh
as uh uh I I I have mentioned previously
that there should be a clearcut
dialectric contra contrast between uh
the target material and our medium so
medium is our soil as of right now so
the electric dielectric constant of soil
is very important parameter for the
survey so uh as we can see this is a
some kind of wet soil that we have
having
so uh the wet soil will be having a
dialectric constant of
around 9 or
10 you can
see similarly you
can customize also so based on that uh
you can
uh the dialectric constant of some known
uh parameters are given so if if there
is a ice or snow so if we uh select this
snow or ice so our dialectric constant
will change automatically so you can see
it has been changed to three or if there
is dry sand then the dialectric constant
is
four and if if we
take if we
take average
soil dialectric constant is around
14 and if it is wet soil then dialectric
constant is around 25 but as you can
see uh the top layer is uh showing uh
the more that the signal is getting out
of the uh our this bar and uh beyond
that uh the signal is getting completely
attenuated so this is not a ideal uh vle
so we have to adjust it based on our uh
type of
soil that we can encounter
so we can take uh average soil or
uh or you can custom
customize uh the dialectric constant and
you can keep it
to your own value if you want to give so
if I am giving dialectric constant as N9
then you can see that vle is more or
less fine but some data is getting uh uh
uh spill out of the bars so uh to uh
other other things are the scan density
so uh there are two options uh scan
density normal and high so obviously uh
to get a high resolution data the scan
density should be high and uh but the
thing is the number of uh uh space the
the quantity of space it will take it
will be more uh and uh the auto save
file should be on the option is on and
off so we should keep it on always on on
so uh I have shown you the scan
parameters now we can go to the
gain so gain is particularly it is
enhancing your data it is uh with the
help of the the whole this wiggle is uh
is divided into a few the based on what
you the number of points so in this we
have we have divided the whole uh vle
into four parts uh so by changing the
values of uh the input signal we can uh
adjust the wiggle through this option so
if right now gain mode is auto if I
change it to manual so I can change
it so for the the first part that will
be through suppose this is divided into
four parts so the first part will be the
gp1 gain point one so
uh I can adjust it through this
point and now you can see the wigle is
completely adjusted between this bar by
just simply adjusting few values so uh
the gain Point has been uh
adjusted filters
is uh you can uh if you know that there
is some noise from the background or
something so we you can uh remove the
background removal uh by giving some
values but uh it will be okay if we do
this uh during the processing part of
the data because we don't want to lose
any kind of the target signal so if you
will give some value to this it will
lose out your data similarly uh this
will be this will be giving you the
signal floor so how much uh signal it is
getting the realtime signal it is it can
be accessed through this green uh
histogram that is getting developed the
Peaks that is getting developed through
this uh the migration so uh if there is
a dipping uh strata that we can
encounter within the subsurface so to
migrate the dipping data to the the
horizontal data that we can be that can
be done through the migration that can
also be done through during the
processing part of the uh uh data and uh
this is a Hilbert transform this is a
kind of a filter that we can apply to
improve our data and
uh uh this
is uh that we have seen now line track
line track is the feature special
feature that is given to the this model
which can detect the live cable within
the subsurface Suppose there is a live
live uh electrical cable within the
subsurface so when we will turn on this
and uh uh we will use it through the uh
power mode so there will be two
frequencies that is 50 HZ or 60 HZ uh
typically we should keep it on the 50
htz so it can easily detect the live
cable that is there in that is lying in
within the subsurface so as of right now
we are not having that Target so I am
keeping it off and uh similarly
maintenance that is uh there is uh there
can be a inbuilt GPS but in this unit we
don't have GPS uh so uh this feature
will not work and uh apart from that if
we go to the output options so display
how we want to display our result that
can be adjusted through this window so
uh there are different color color
tables as I told you that the positive
will be shown in the blue color and the
negative will be shown negative polarity
will be shown uh in the red color so uh
uh uh that can be changed through this
uh we can change it through our required
so now we have changed the color screen
and by adjusting the we can actually
uh differentiate different kind of
Target material according to our but
best is so best is this that we can uh
that and uh other thing is the color
stretch if you want to stretch uh the
color table uh through this that is fine
and uh the
color should be the black on white or
white on black that is different
and uh we can manage our file so uh we
can go to the data path where our file
has been uh we can change the data path
where our data is stored or we can uh
add a new data path through this uh file
and we can copy or move our data to the
USB drive using this steps and we can
also delete the files using uh the
delete file tab so till now we have seen
uh the basic principle of GPR how GPR
works and uh what is the resolution that
we can get through the GPR and uh the
different components of GPR that is the
uh receiver transmitter and the control
unit and uh we have also seen the
parameters that we can use while the
acquisition of the data so I will stop
here and we will continue to the next
lecture uh in the next Lab and in in
that lab we will uh show you how to uh
acquire 2D and 3D data into the field
thank
[Music]
[Music]
you
[Music]
