Tôi Chế Dụng Cụ Đồ Nghề Sửa Ô TÔ

Hello everyone, today I will share a great video for you. This is my car, I haven't used it for a long time. I haven't used it for about a month. I took it out and started the engine. I put the key in and started the engine. It won't start. I've already filmed how to fix it. To let you know, it's not just a broken bottle. When I took the car out, I knew my bottle was weak. I asked him to put the bottle in for me to run. But when I got home, I couldn't stop it. It was very difficult to open the carburetor to check the bottle. There is a mechanical key in the electronic key. So I took the bottle out and charged it all day. Charging from morning to afternoon. And plug it in. At this time, check the engine to see if it explodes. Put the key in. Turn on the light. It doesn't explode. It doesn't explode enough. Turn it off immediately. Turn it off. Put a new bag in. At this time, in Cao Lanh City, I went to the bottle facility. I bought a bottle for 1.7 million. And gave a raincoat. The bottle is from Phu Duc. The Phu Duc facility sells it. Let's see if it explodes or not. I will test this bottle later. I will review it in the next video for you. I recorded the process of buying the bottle. It costs 240,000 VND. My bottle was bought for 240,000 VND. I don't know what I bought it for. But I brought it home to review it in the next video. Let's see if it explodes or not. After putting the new bottle in, I will check the engine to see if it explodes or not. Put the key in. The screen is still on. Open it. The Android screen is still on. The screen in the car system is still on. It still works, but I check the engine. It doesn't explode. Open it, it doesn't explode. And it reports like this. It reports everything. It reports the ESP, EPS system. The speed limit. It doesn't allow the engine to start. EOS, SOS. It reports everything. I can't press it now. The screen is still on. Now. It sings normally. Now, I will take it out and check it first. With my doubtful personality, I don't believe that the bottle is broken. I asked the seller to come and check if my bottle was broken. And I found a bottle. My old bottle is broken and the new one is still in good condition. So the seller was right and did his job well. And I was so angry. How can I let the car run? And I checked with an electronic technician for more than 30 years. Can't this car be fixed? Let's see how I fix it. First, I check the bottle to see if it works. I replace the new bottle. After that, I will open my trunk. And in the trunk, I always put all my toys and tools. I will take it out. These are the things I bring with me. Okay, let me measure it. What do I have in my toys? I have a light bulb. This light bulb is made of electronics. I plug it in. This light bulb is 12V. Then there are clocks. And clocks. I always bring a clock with me. I have a number and a dial. I must have one of two clocks. Then I take the stick of the clock. I stick the stick of the clock together. This is the fastest way to measure. Red stick, stick, red stick. Black stick, stick, black stick. And through the clock. For example, if you measure it, the light bulb will light up. The light bulb will not damage my car. It will not break the electric wire. There are many times when you don't know, it will burn the electric wire inside. Inside my car. For example, if my car is inside the electric wire, it will burn away. But it's hard to find. Now I will measure the clock. First, I open the lock. Then I will find a cable. I plug it into the cable. I plug it here. If there is another plug, it's good. I plug it in here. This is the plug. Then I put the light bulb here. One turn, I will plug it into the plug. Plug it into the plug. Plug this side, the light will light up. Is the light on this side or not? Light. You check all the plugs in here. If there is any plug that is burned, you have to replace it. If not, you have to use the second method. What is it? You guys pay attention to the bottom. Look at the battery. Which wire does it go up? Professionals look at this cable. Professionals look at this wire, people know. This cable. This cable is a purple wire. It's here. It is here. Now I will plug in the battery into this wire. See if it can be charged. If it can charge, my battery won't break. If it can't charge, my battery will break. I will replace the battery. I'm going to inject it into the four-leaf clover to see if it will jump or not. It's clearly jumping, guys. I'm going to inject it into this leg. Can you hear it jumping? If it doesn't jump, the clover is broken. Or if it jumps, these two knots have to be connected to each other. If these two knots are not connected, it will also be broken, guys. These are the clover I removed. I'm going to measure which knot this rope is connected to. Now I'm going to connect the electricity here. I'm going to turn on the 1-volt mode. I'm going to turn it on so that I can measure where the electricity is going. You guys, please step out of this gate. Step out of this gate. I'm going to measure where the electricity is going. This is the 50A cable. I'm going to connect it to this cable. It will be able to measure if the clover is broken. Oh, the clover can still be used. If not, it will be broken. Now I'm going to inject it. I'm going to insert a stick into the frame. I'm going to inject it to see if the car will explode. Now the car is exploding. This indicates that the car is out of electricity. The problem is that the clover is broken. You can analyze this. First, the clover is not broken. When I inject the clover, it works. The car explodes. If I don't inject it, I inject the car, there is no electricity. The reason is that the clover is broken. Because I injected the clover too hard. Or I injected the clover too long. Before that, I excluded all the clover. The clover did not jump. The clover did not stick. And I removed all the problems. So I have a problem. There is no electricity. And if there is no electricity, I see the clover has an X shape. That is where the electricity is supplied to the clover. I use a wire to connect the two ends. One end is connected to this wire. Because the clover exploded. The other end is connected to this wire. I dropped my phone. While I have one hand to film and one hand to work, please watch for me. I will bring it back. I will go down to this gate. Go down here. Watch this. Do you see the word frog? The word frog. This is the word frog. Now I will insert this hole. Watch carefully. Insert this. One hand to hold and one hand to film. Do you find it difficult? Please give me a like to motivate me to make videos to share with the community. Push down. OK Push down. Now I will go up and test it. I will go up and test if it explodes. I will test if it explodes. OK It exploded. Ah All the fault is gone. My engine is running. So I I tested it step by step. So I tested it step by step. The reason I