Appliance Circuit Basics | Repair and Replace
3 Video Views·May 28, 2024
Hi I'm Vance and welcome to Repair and Replace.
Appliances are somewhat simple machines
built from a series of mechanical parts and basic circuits.
Knowing how these circuits work can help you understand
why an appliance isn't working properly.
In this episode we'll learn about the fundamentals of circuits
and the three main ways that circuits fail.
We'll look at short circuits, ground faults, and open circuits.
Now before starting it's recommended to watch our
Multimeter and Electricity Basics video.
This is linked in the description below.
A circuit is a series of interconnected paths
that carry an electric current.
All circuits will have a power source, wires or conductors,
a switch for controlling the circuit,
and a device or load that offers resistance to the circuit.
The hot wire or line carries the power to the load,
and the neutral wire returns the electricity to the power source.
The ground wire is usually green and is connected to the metal appliance housing.
This provides a safe path to return to the source
and will protect against electrocution.
All circuits need a continuous path to return to the source.
This is continuity or a closed circuit.
If we disrupt this path with rubber, plastic,
or by air in the case of a broken wire,
then the current will not flow as there is no continuity.
This is an open circuit.
This often happens when a component burns out or fails internally.
Depending on the component,
this might affect the whole appliance or just a particular function.
For example if only one stove element stops working,
then it's just an issue with that particular circuit.
Now if all the heating elements are not working,
then it's likely an issue with the incoming power.
You can learn more about testing appliance components in the video linked below.
All circuits need to be grounded,
and must have overcurrent protection to prevent electrical fires and electrocution.
Your home's circuit breakers protect all downstream circuits and devices,
and will trip when the current gets too high.
As well, some appliances will have one-time fuses rated for a maximum amperage.
This will protect against short circuits.
Short circuits are created when the hot and neutral wires touch,
and the circuit is completed before the load.
In this case the current no longer flows through the entire circuit,
and with no resistance the current rises.
Without any protection, this increased current will cause the wires to heat up,
burn out, and will start an electrical fire.
In a protected circuit,
the extra current will trip the circuit breaker or will blow the fuse.
Now if an appliance keeps tripping the breaker,
then it's likely that there's an internal short.
In this case you'll have to locate and repair the damaged wires or component.
Then the breaker must be reset or the fuse replaced.
A ground fault happens when a hot wire or component
touches the metal housing of the appliance.
The housing is now energized,
and the ground wire returns the electricity to the source.
Electricity will always take the path of least resistance.
If you touch an energized housing that doesn't have a ground wire,
you might be electrocuted.
If the ground fault happens before the load,
the circuit is shorted,
the current increases,
and the breaker or fuse will blow,
cutting power to the appliance.
Now if the ground fault happens after the load,
there's still resistance in the circuit,
so the breaker might not trip.
The appliance might still be functional,
but this depends on the component affected.
To test if an appliance is shorted to ground,
you can plug it into a circuit protected by a GFCI,
or ground fault circuit interrupter.
GFCIs monitor the current between the hot and neutral lines.
If there's even a small amount of current leaking to ground,
then the GFCI will trip,
disconnecting power until it's reset.
Components can also be tested for shorts.
If the component has continuity between either terminal and the metal frame,
then it's shorted to ground and will need to be replaced.
Hopefully these videos have helped you become more comfortable
with repairing your appliances.
For more troubleshooting on water heaters,
furnaces and appliances,
then subscribe to our channel.
And if you need help,
you can call or visit an AMRE location
to talk with our knowledgeable staff.
Thanks for watching.

