More Power, More Fuel! // 2UZ V8 '74 Celica

ThrottleStream
1 follower
1 Video View·May 14, 2024
Quality Car Builds Don't happen Overnight!
Support This Channel❤️
⭐️Merch: https://shop.sarahntuned.com
Patreon: https://www.patreon.com/sarahntuned
Amazon Store: https://www.amazon.com/shop/sarah-n-tuned
https://blakemachine.com/performance_parts_by_blake_machine/1uzfe_lexus_oil_adapter
Website: https://www.sarahntuned.com
Instagram: sarahntuned
Facebook: sarahntuned
X/Twitter: sarahntuned
Special Thanks to my Patreon Support!
Britt F.
Chad B.
Col. L.
Curtis S.
Daniel F.
Darren M.
Dave
David L.
Jeffrey P.
Josh H.
Kevin C.
Mark L.
Meghan "in Seattle"
Nenad R.
Ray I.
Terry S.
Todd C.
hello people on the internet watching
automobile related videos welcome to
this my 1974 ra21 Toyota Celica St
housing a Toyota Tundra V8 where I last
left off in the previous video on this
car if you're new there's link up above
if you want to get caught up on it I
came to the conclusion that it is
mathematically impossible to retain air
conditioning with a huge V8 stuffed into
this engine bay the hardware on my
harmonic balancer is physically pressed
into the radiator right now keep in mind
that spins the AC compressor and the
water pump are about 1 in to the
radiator up front the distance from the
radiator to the back of the grill a
little less than 3 in or about 75 mm
keep in mind the engine is pushed all
the way back to that firewall like
millimeters from the firewall no room
back there so if I were to stick the AC
condenser down inside this Gap keep in
mind there's no cooling fans that will
fit behind here right now I have
approximately an inch and 3/4 or about
45 mm giving myself zero clearance from
those bolts they are physically touching
the radiator right now and just to give
you an idea of how big of a cooling fan
I need to provide the cooling for that
4.7 L V8 this is 265 CFM 11in fans on my
MR2 and those protrude a little over 5
in from the surface of the radiator so
even if I were to use use a smaller AC
condenser it's still not enough room to
get cooling fans in there I does unless
it was a piece of paper there is no room
to get cooling fans in there so
hopefully that clears things up to show
that I wasn't being hyperbolic by saying
AC is not possible on this car so now
that that is out of the
way lift with your butt not with your
gut I have a lot of little things that
need to get done on this car before it
can ever start like putting a
transmission in it about a month ago I
had my igene w 58 5-speed manual out of
a markv Supra rebuilt and the gears
cryotreated and I had glass bead blasted
the casing before it was rebuilt which
it looks good but it's susceptible to
stains very easily now so I want to make
sure yeah see is a little dirty still
while some people would recommend
painting it silver which would be the
same color I guess I prefer the look of
raw aluminium finish just natural I have
no idea where I put this stuff direct to
metal clear coat not sponsored this is a
very similar process to what was done to
the original valve cover on the 18r
engine that came in the Celica from the
factory that was actually covered in a
clear coat except mine was yellow and
dingy since it was 50 years old now
whilst that dries this is where I'm
going to permanently Mount the radiator
it's pushed as far forward as it
physically can go and that gives me just
enough room for my cooling fans that's
about 4 in away right there also getting
a radiator hose on this lower port to
clear these pulley is going to be a
little of a challenge as
well I think the smartest thing would do
would be a run a rubber bushing to mount
this to the core support I got to make
sure I run heavyduty enough of a gauge
of wire for my cooling fans so I picked
up another waterproof fuse box six AWG
wiring for cooling fans and engine bay
fuse box I'm going to utilize Factory
mounting locations as much as possible
so I don't have to put any more holes in
the engine
bay here is this oh this the Barnacle
that's important please keep in mind I
got to body work and paint the engine
bay still so I'm just Loosely bolting
things in place and I'm going to add nut
shirts and drill holes during that point
in time additionally we'll have this one
back here in the
trunk something like that dry sweet it's
dry it's already dark out I would call
that an absolute success I love the way
that turned out how it looks looks
[Music]
[Applause]
new it's the following day and what I
have right here is the fuel pump I chose
for the car it's not sponsored I did a
ton of research and I felt this was the
best pump for my application and since I
chose a Bosch AG G battery for the car
again not sponsored I chose this stuff
and paid for it uh I wanted to stick
with the same brand which is actually
something you see a lot of traditional
Japanese tuning shops do they'll stay
with products all from one brand or all
one line it's just cleaner I feel that
way since I have a rearm mounted battery
it makes sense to do a rearm mounted
fuel pump relay the first step on this
little mini circuit is I'm going to run
a 30 amp fuse same exact Principle as
what I did for the interior fuse box
circuit where I put a fuse at the
bulkhead these ones are weird you have
to Route it backwards you can actually
screw this up weather
dad
[Music]
uh I didn't have to use a weatherproof
use holder but there's a bug I just
thought it look clean in the trunk cuz
you don't really want to see a lot of
electronics back there so the factory
battery fuse on a Toyota Tundra 0506 was
140 amps because the starter has to go
through this circuit it's going to need
a much larger fuse than 100 amp but I'm
not trying to start the car this is just
for testing for now so I'm going to
leave 100 amp in there so since I'm
doing a rear mounted starter I need to
still isolate the battery back there but
I need to have adequate current flow to
the starter when it needs it so usually
180 200 amps is a safe bet on the fuse
why do I always do this I'm so
[Applause]
dumb 30
[Applause]
[Music]
oh I love
that so in order for the fuel pump to
know when to turn on I need to send an
auxiliary output signal from the ECU
back to the fuel pump
relay orange and green orange and red
orange orange and not brown orange you
glad I didn't say banana orange and
black this is going to drive my fuel
pump I kept all the excess wires from
when I did the MR2 and since that's Mid
Engine I might have some extra orange
and brown I got an extra orange and
green orange wire I have orange wire and
it's 18 AWG guess I could route this
with a speaker wire so I'm going to take
my speaker wire my fuel pump signal wire
and this nylon
mess and you stick the cable in it and
then you fish it through and it protects
it now that I've have successfully
shoved a snake's ass up its ass I can
trim its
skin so I got a piece of scrap radiator
hose it's new but scrap and I I shrimp
it yeah that's perfect so where they
pass through the frame right
here it's like a cha fr split this one
for the
rear perfect oh man I'm going to have to
make this in the trunk that's a
bummer I screwed up but I caught it 85
just switched 12 86 to auxiliary output
yay I get to do this all over again my
favorite aha I can fish it through
though this right here is going to be
the mega ground I don't know if I'm ever
going to finish wiring I think I'm just
going to wire for the rest of my life
I'm just gonna that's what I'm going to
do that's my life I
wire this is the starter relay ground if
I'm going to tie this stuff up into the
dash harness that's a lot of wire to
continuously go just from that relay up
to something else I think I need to put
a plug in it yeah I'll put a plug in
this this will be cleaner it'll be way
cleaner tachometer gauges 5-speed manual
transmission hello welcome to the next
day this is not a printer that will run
out of ink after the first time you use
it but it is a part that is so insanely
rare oh it's the right color too
junkyard Dave a fellow YouTuber was
parting out a 74 Celica ST which did not
come with Factory AC and it had the same
color interior and the cars that don't
have Factory AC have a shelf in the
passenger foot well start off with a a
little bit of citrus de
Greaser lightly get all this Gunk off of
it I have no idea what I'm flinging all
over myself that literally could be
liquid
poop time to go rinse so I got super
Lucky in the fact that this must have
been sitting upside down in the car in
the junkyard for years because the side
that you see the side that faces up is
not Sun bleached the underside that you
won't see is hand it in a little heat
gun the last thing I want to do is
overheat this and ended up making a
glossy spot so I got to be really
careful that's working so far man that
looks brand new
again I found the limit of these
Milwaukee heat guns that killed the
battery in about 15 20 minutes the UND
side's a little splotchy but you don't
see it so it doesn't matter the top side
looks mint though the little bracket is
crusty but it's held on with two rivets
so I can drill it out and send it to
powder coating on my next bat how is
this thing held in I definitely do not
want to break this because this is
probably worth a lot of money and I am
not going to just throw it
away it's also worth noting the AC did
not work in this car when I bought it it
probably just needed O-rings and a
charge but it didn't work
so take the hood
[Music]
off how do the oh no come on push
through
beat aggressive be eat aggressive come
on there we go got it yeah that is not
light that is a heavy unit and I don't
need uh any of those wiring if I had to
guess this is probably about 30 35 lbs
plus the compressor is about the same
and then the condenser and all the like
the dryer all the lines I'm probably
saving almost close to 100 lb of weight
off the nose of this car question is
what about with the shelves not really
sure how this went in I guess this way
oh there's a little spot for it right
there oh I got to unbolt that bracket I
think so that bracket gets removed it
literally goes exactly to the carpet it
matches the carpet perfectly now I have
more storage space in here and it's a
factory part yeah that's going to be
perfect with the center
console are you crooker
man I'm getting good at this it's almost
like I play musical cars every single
day in this
shop whilst I do still have wiring left
to do on this thing I'm trying not to
overload you with it get it there's a
pun in
there I'm trying to do some other stuff
that's important too like the fact that
everyone keeps complaining that the
tires are mounted backwards they're not
mounted backwards I just have the Wheels
thrown on temporarily so I can roll the
car around the shop look I don't even
have all the lug nuts on it cuz these
aren't even the actual lug nuts I'm
going to
use they're on facing the right
direction even though they're probably
going to come off another couple times
there I don't know why I let that
consume any of my time but I'm sure
someone's happy now it's all right I get
bothered by dumb things like when people
Park crooked or I don't know where a
good home is for this I got to have the
drive shaft and the exhaust going
through there I mean in my Quattro it's
mounted like right here I put it above
there but what happens when the pumpkin
travels this pumpkin takes more
vacations than I do what's that I have
never even taken a vacation before I
don't know what a vacation is the best
place would be over in this area you
know what won't move up is this side of
the panh hard bar there's nothing that
can move up in this area and I got a
wall right there well that's a pretty
solid spot I bought our bracket for the
fuel pump it's actually pretty sweet
it's all powder coated black nice
Hardware how much does this protrude
dude that's perfect that is literally
perfect wait do I take this rubber oh I
take this rubber off that's not what
don't worry about that just a slight
anger W my arm is so pale I'm try to
hide my face from this shot I'm going to
have to put it at an angle this is
really tricky to film I don't know how
I'm going to drill up in here that's not
going to be
easy a that was so loud there is a
little creature burrowing a hole in
either the
wall or the ground I keep hearing it I
was trying to get it on camera it's like
a
little whatever is inside that hole
keeps making noise I can't see it I need
a flashlight
flashlight jemel
Las Vegas is that possible to get a
Dremel hell yeah it
is that is so loud I don't have a right
angle
drill this can't be good for a drill
bit there you go that sucks I didn't
even think about that the Dremel keyway
can only accept things so small and a
drill bit to do this hole is way bigger
why did I not think I could get a drill
up in there I'm so
[Music]
dumb there you
go W that was bad oh this little I guess
I keep both of those cuz it doesn't fit
without
it yeah that fits super tight there we
go just for now let's put this up in
place
sweet so so the way I have this oriented
the fuel line's going to come out right
here at the exact height as this frame
rail so it'll just come straight out and
run along here and then on the other
side it'll come out and it goes straight
up towards where it comes out at the
bottom underneath the fuel tank right
here dangering dangerous thing doing
what stupid people do when they get
injured got it I don't do the smartest
things in the world
sometimes there's a rubber grommet
already underneath here that I can send
the power wire through no I really don't
want to keep removing the seat back see
that little yellow wall well that goes
along the backs side of the tank so the
wire is going to pop up over there or do
I or can I just go fishing so I just
need to pierce that rubber that's
something you don't want to do unless
you want to have babies pop a hole right
in the center of it hope there's nothing
important above
this oh okay that's the bottom of the
fuel tank if I shove enough wire up in
there it'll go somewhere
obviously I wonder where that
[Music]
went
[Music]
okay in case you're wondering all these
wires you see here are going to be
neatly bundled and loomed but I'm not
doing that again until the car
starts before I forget I want to give a
shout out to one of you who watches this
channel Carl for sending me this it's an
old school Toyota hang tag you can see
it has like the maintenance schedule on
there and the back side is all in ki
there's no date on it but I'm guessing
this has to be fairly close to the age
of this car which for a piece of
cardboard to survive 50 years that's
amazing so thank you Carl and this is
definitely going to go in the car oh man
where's my oh there it is I put Loom
over it to protect
it I came with some little rubber
boots E's
EES how Tucson of me I'm heat shrinking
the terminal also on top of everything
just cuz it's going to be down here that
way it's super weather resistant I use
red heat shrink on the power wire just
as a quick visual reference indicator of
which one is the power side going to the
fuel pump this thing is so small out
back I have the battery ground and the
fuel pump ground up front I have the
alternator the driveby wire system the
temp sensors the alternator and the map
sensor and the wide band to wire up and
then all wiring is done I've been saying
for the past three videos I wanted to
work on the MR2 and I still haven't
started because logic dictates I need to
finish the wiring up on this thing
because there's a lot of work so I'm
going to flip a coin heads the next
vehicle I work on is a Celica tails the
next vehicle I work on is the MR2 ready
one shot I I want to stop record so you
guys can see
this tails what did I say tails was
Tails was the MR2 I know I really want
to make progress on Cela cuz I'm getting
so close but I we all need a break so
MR2 is thank you for watching and see
you soon in another video bye
