I Have To Re-Do This From Scratch // 2UZ V8 Celica

ThrottleStream
1 follower
Jun 22, 2024
Quality Car Builds Don't happen Overnight!
Support This Channel❤️
⭐️Merch: https://shop.sarahntuned.com
Patreon: https://www.patreon.com/sarahntuned
Amazon Store: https://www.amazon.com/shop/sarah-n-tuned
Website: https://www.sarahntuned.com
Instagram: sarahntuned
Facebook: sarahntuned
X/Twitter: sarahntuned
Special Thanks to my Patreon Support!
Britt F.
Chad B.
Col. L.
Curtis S.
Daniel F.
Darren M.
Dave
David L.
Jeffrey P.
Josh H.
Kevin C.
Mark L.
Meghan "in Seattle"
Nenad R.
Ray I.
Terry S.
Todd C.
hi people of the world watching internet
videos that have to do with cars welcome
to this my 1974 ra21 Toyota Celica St
with a Toyota Tundra V8 lurking under
the hood if you'd like to get caught up
on the last video where I did some
restoration of original trim parts on
this car up above my head is actually a
link to that
video yesterday this package arrived and
in it contains the ingredients which are
needed
I am the dumbest human when it comes to
opening and making
packages yay this interesting looking
robot licorice is called cron nickle C
Kon C cpra nickel it's a cross between
copper and nickel and I don't think this
should be too too difficult cuz I got
all the little spots for it already The
Originals these albeit they're a little
bit orted from their original shape
still fairly close are the original
brake lines and fuel lines for this car
I don't want to reuse them cuz they're
50 years old and brakes and fuel are
kind of important original fuel lines
went on this side and the fuel filter
goes up in the engine bay so that
means yeah if I stick this in now it's
going to be a pain so he said
[Music]
this I don't think lines are going to
clear through there that's that's a no
then I got the headers to contend with
transmission's that wide so I got plenty
of room right here up above where you
can't see there are two hard lines that
come out of the bottom of the fuel tank
and they're facing forward but my fuel
pump is right here I was trying to avoid
doing this I really didn't want to but
it'd be lazy of me not to I don't want
to ruin my brand new carpet so just
probably peel us back because this car
was built in 1974 such a small gas tank
the fuel tank is located in the trunk
which subsequently takes up half your
space this thing's got a lot of fuel in
it it's like half
full that's a whole lot of old stink
that can get cleaned though I got to
figure out which one of these is the
supply and which one of these is the
return cuz that's going to make a big
difference okay normally your supp fly
line is larger diameter but these are
both the same it's literally only about
an inch from where it protrudes from the
bottom of the floor pan and that would
be still pretty easy to run a soft line
where Sarah's taking this fuel Nobody
Knows the factory fuel lines on this
truck came up the passenger side brake
lines and fuel lines all right here jeez
that steering shaft is so Rusty looks
like it's was about right a snap holy
crap nothing is over there
ah means I have to Route everything on
this side I don't know if I ordered
enough to do both Supply and return this
25 ft should be little did I know I was
over complicating things here and making
a crial eror i' have to fix later put
this
back measure 63 times cut once oh you
janky stupid tape
measure
7 7 and 1/2 ft of line I have 25 ft why
does it seem like that roll is not okay
part of me wants to get crazy with the
cheese whiz and do all kinds of crazy
nice bends and have it follow Contours
but that's not how this came from the
factory and I just open the door for a
bunch of problems potentially by trying
to show off it does make me a little
nervous having my fuel lines terminate
right above the header here but there's
so many other fluids in this engine bay
that could drip on hot things and create
fires so literally stuffing a Tundra V8
and a 70 Celica if I wanted this to be
easy I would have just put a LS in it
that's going to be pretty cuz I got my
clutch lines coming out right there too
so it'll all be uniform charlie kilo box
Trot
uniform
charlie
kilo oh yeah I got tons of line what am
I thinking can't believe I'm actually
going to say this but I kind of miss
working on bomb lifts doing this in case
you're a wondering all this gold that
you see under here is just sanding desk
from when I was doing the body work it's
not overspray I just need to clean it
which I should probably do before I
stick this up here man hello my name is
Sarah Poppin I'm a dumb white
girl I'm sorry I can't stuck in my
head a little bit interior cleaner
because this is rubber under coating and
that just made some kind of sense I
think
there stick this up in this the te on
the inside of the parking brake cable
transmission cross number that's fine
about what I said making things more
difficult for myself still doing it go
up I have a tab there but I'm use that
for the brake
lines I got to get this
up there we go I'll go something like
that
the the fuel line is it has organic flow
to it I feel like some 70s people would
be happy about that I don't know where I
put the
cutter this is why I can't have nice
things because I just lose
them 7 + 7 + 7 is
21 so even if I screw up I might have
enough to do it one more time I don't
think I M that wrong I'll give myself a
tiny bit
extra okay these like Vines need to be
like eyebrows they're sisters not
twins always remember
that this side of parking brake
cable keep it simple stupid don't get
all fancy
pants I don't even want to know the
horrific faces I'm making trying to do
this this is where it's going to get
hard because I don't have any tabs back
here I should I really need to just weld
a pair up on the bottom of the
car the following day I had access to
the paint booth next door so I'm picking
back up where I left off in the previous
video painting the pieces that I was in
the process of restoring first up
adhesion promoter since all these pieces
are plastic I want the paint to actually
adhere to it so using the same gun I'm
going to spray the paint with I give
everything a thorough coating I'm going
to let him sip for about 10 minutes
before I shoot it with the base it's
about 95° or so in there so so I'm going
to let first coat sit for about 15
minutes before I shoot my second coat
surprisingly enough getting in between
the slats on the grill and the wiper cow
louvers really wasn't that difficult
thanks to this little mini
[Music]
gun it's been drying for about 30
minutes now and uh the color is perfect
it's like exactly the color it was
before I'm going to put a matte Paar
coat on here and thin it out so it comes
out to an eggshell finish while I'm not
100% certain I am I'm fairly positive
that these pieces from the factory were
just sprayed with a base clear allinone
that had a flat finish but I went above
and beyond by doing a separate base and
clear and the way this clear works is
depending on what ratio you use with the
activator and the clear itself will
determine the type of Sheen that the
Finish will have after it's finally
sprayed out and this is why people pay
people to do jobs like this I
contemplated not filming this part but
since I have to Seer through this twice
weak every time I film a car r view in
here I figured you guys could take part
in that process and watch me struggle
like an idiot and yes I know they make
creeper Dolly things that you can put
underneath your tires but I had a set
and they were garbage and they broke and
I threw them in the trash that's good
now that I'm done being microwaved like
a
burrito that didn't make any sense but
my brain's not working correctly hey
look screwdrivers
[Music]
the odor of dust is quite pungent you
might be saying to yourself This is
pointless because no one's going to see
back here but you're definitely going to
smell back here oh yeah that's
disgusting no wonder it's
[Music]
stunk they are much cleaner it's pretty
toasty in here already today and the
forast tomorrow is supposed to be 110
even
hotter remember how I said I made things
over
complicated
I oh confusing confusing confusing both
fuel pressure regulators are right here
in the back but oh this is a problem a
delightful little treat I just
discovered is that the 3 U intake manold
and subsequently fuel rails that I'm
using on this 2 U don't have a return
fuel system the original the 2 U intake
manifold and fuel rails did but if you
look at the end of the fuel rails right
here there is a removable Port which I
can modify and add a fuel pressure
regulator and make this a return fuel
system I reinvented the wheel and I
didn't need
to
aha I think it'll be all right
thankfully cuz both sides of the
transmission tunnel are so similar
actually didn't have to bend very much
to make it work on the other side
something like that I can transition to
a soft braided line all the way up to
the fuel rail from here my gut feeling
told me to do it on this side to begin
with and I should have St with my gut
feeling I'm getting to the point right
now with this build where the stuff that
I have left over is stuff that I
literally have no game plan for and is
going to be highly difficult to figure
out for instance this hole right here
has to fit a brake booster master
cylinder and a clutch master cylinder
this doesn't even
fit so this is the original clutch
master cylinder for this car and this is
the one I bought for it it is also a
Toyota aene part what your
U10 the old clutch master cylinder
leaked you can see it ate away all the
paint right there but luckily I need to
fabricate they're similar but not
similar enough to make this bolt on that
will not budge time for Plan
B aha if I try to drill a hole with the
stud just pressed up against the
firewall there's a chance that I might
not have it aligned properly for the
center I'm sure this stud comes out easy
a hole just slightly off considering how
much larger diameter of a board this
clutch master cylinder is from the
original one it's surprising it doesn't
need that much more clearancing to
actually make it fit Perfecto it's the
following day and this is the finished
product of the grill the center bezel
strip that you guys saw me refinish in
the previous video and now the part that
I just painted in the first half of this
video is now complete additionally
you'll notice that my wats and obies is
as well as the body of the coil over is
also gunmetal and they all match it all
ties in perfectly the grills right here
in the wiper cowl those will also match
just a subtle little touch up here and
doing that satin clear coat with a 5 to1
reduction gave it that perfect amount of
eggshell Sheen so it looks just like the
brand new piece of plastic did when the
car was new I don't own a right angle
drill and you can't get to the backside
to drill these holes ouch
oh my God I can't even do
this that thing's hard to
[Music]
squish that drill bits like rounded off
this is a cheap drill bit to start with
all my good ones are broken I guess they
weren't very good to begin
[Music]
with I don't think it's possible to get
to the underside of it that might be
just
enough there de bird
I couldn't have got it any better that's
mint success toy Land Cruiser 3/4 in
master cylinder for the clutch I just
need to get one knot on it so that way I
can make the lines I don't need it to
actually be functional yet where the
hell is it oh there it is all right ouch
I'm stuck the hills on your
head is that an eyebrow do you want
eyebrows
[Music]
this car originally had the clutch line
on the passenger side of his best
friends
ride what follows now I can only explain
as brain fatigue which
subsequently it will be the same with
the
w58 so that means to do this correctly I
need to maintain the soft flexible line
between the two hard lines that way as
the transmission and engine move which
won't move very much cuz I have solid
mounts I know I said I wasn't going to
get all crazy with making my lines
perfectly Contour the side of the tunnel
but I made I they perfectly Contour the
side of the tunnel this fuel Tank's way
lighter without all the fuel in it it
probably only weighs like maybe 10 lb if
that the entire point of doing this was
to figure out which is a supply and
which oh it's got the little teq logo
yes I know that's Toyota in Japanese but
it looks like the letters t e
q they're literally The Identical they
both go to the bottom of the tank
there's no little mesh filter on the
bottom either one of those I'm not
filming the inside of this tank because
it needs to be cleaned better that's
just dumping it is not good enough so
much for finishing that one up back to
the clutch I need a spot where I can
hard mount a union to tie that together
I mean that's that's
literally almost all the way how the
am I going to do this I have no
idea how I'm going to do this this is a
weird looking nipple cap and this is the
point where I'm going to get 63 comments
about the tool I should be using to do
this but I don't have one or else I
would be well I do have quite a few
tools I don't have every tool I need so
I'll make my own tool from scratch by
sacrificing a
[Music]
scribe and it's out put a little bit of
Lube on
there sweet for those of you that are
wondering why why I SW swapped out the
factory Celica master cylinder for the
onea Land Cruiser the whole reason is
because of this I'm using a different
style throwout bearing to adapt the w58
transmission to the 2z bell housing and
this is too big of a unit for the
factory one to be able to cope with
that's why I needed the Land Cruiser one
I presume a Crush Washer now this is
where stuff is going to start getting
very complicated the adapter plate for
this kit has all these holes already
pre-drilled and threaded for the
throwout bearing to have fix to and I
ideally wanted to orient it somewhere up
like that but the problem is you can't
because of all the bolts that attach it
to the transmission they protruded out
and hit where your line would go cuz
this is not this is not meant to go
together like this this is a bell
housing from a tundra and a transmission
for a
Supra oh jeez it is Thunder that I heard
that's a gnarly looking
storm just in the off chance that it
hails I don't want my Bronco like I like
my
[Music]
pasta this is going to be tight
tolerances I'm going to I have to cut a
hole in the bottom and run the line
straight through cuz that's just too
harsh of a Bend I can't even get the
throw bearing on all the way that's how
you end up getting a hole in your line
you can put a an elbow right here but
the elbow still is probably going to hit
this flange this video was exhausting to
make I feel like there wasn't a lot of
progress made visually on camera and
that's because there was a ton of test
fitting required for me to know what to
order parts for it is after all
completely impossible for me to start
this car without Fuel and a clutch is
pretty handy also I keep promising you
guys every single one of these videos
that I'm going to do a live stream and I
I haven't done one yet so after this
video the next thing that comes out I'm
going to do a live stream for you it's
been too long I also need to do an oil
change on this thing it's due in a
couple hundred miles and so yeah thank
you guys for watching and I'll see you
soon with another video bye
